Travel assist activation

Interesting! Let us know how it goes. I will install it when I get it and let it sit standby for a while in the garage and will check the the heat that way.

I guess if you would put a heatsink on it, it wouldn't fit inside the steering wheel. There's already extremely limited space inside the wheel and really the only usable space is where the module for the wheel touch sensor module is supposed to be (where's it's just an empty void for wheels without it).

I agree with your statement. Coming from Skoda Superb 2020 with ALA.
Is the VW Pasat steering wheel plug and play, or is there still a need of some additional coding? I have the ALA enabled already

Steering wheel sold

Hi all,

I'm sorry about what might be a redundant question, but I've read all nine pages and I'm terribly confused.

Is this just for version 2.4, or does the same code work for 3+?

I found the 3G0959542 module for sale in quite a few places, has anyone tried to fit this to their existing steering wheel? Seems like a better idea than the overheating hands free modules mentioned above.

I have had the hands-free module installed for 3 months, it heats up but not much, so it is working without problems. False alarm about the temperature of the module, it works perfectly. I have version 3.2 of the software

You should only modify bytes 6, 7 and 8. Keep in mind that the first byte is 0 ( 10 E4 16 ) this configuration is if capacitive steering wheel not hand module out for an outside hand module to work you must also touch STG13

I found in another thread that the following adaptation in gateway might be related.
In my car it says "subsystem does not respond" because I don't have the touch control module.

I have an ID.4 without factory travel assist. Travel assist already worked for me on 3.0, but the configuration was reset when I updated to 3.2. I have a heated steering wheel, but it needs to be moved every 15 seconds, so I will buy a new one (capacitive). Would this one be suitable (found on ebay) 10A 419 089 R YPG, or must be only 10A 419 089 N YPG.

Does anyone know if module in steering wheel 3G0.959.542.A is compatible with module 3G0.959.542.B ? What is the difference between A and B variance?
Friend of mine got steering wheel with part number 10A419089AJ and has the 3G0.959.542.B module inside.

The important thing for sanber if the steering wheel is capacitive is the inner label must have these acronyms M/ —/H/HOD. HOD means hands on demand

Hi, I have the same issue.
Did you find a solution for this problem? I need only for cruise control, not ACC.
Thanks

This Forum has helped me a lot and I want to share my experience.

I have a VW ID.3 Pro Performance 2021 Model (58kWh 150kW). Also my car came equipped from factory with: Heatpump, IQ Light, ACC Radar and single zone climate.

What I wanted but didn't have: Travel Assist, deactivating peep sound when putting into R (Reverse) and disabling welcome screen (where you always have to press "ok").

Also I bought the car used and always had Software ID 3.2 and I am on iOS (iPhone) so that App may be different for Android users.

Travel Assist:

Info: pls do several screenshots of your default long code before making any changes. I didn't and that was really dumb, but likely this new code with Travel Assist worked. But if it doesn't for you than with your old code you can always go back. Also if you don't have ACC than this doesn't work.


I had to change 2 Control Units: "Adaptive Cruise Control" Control Unit ID 13 and "Driver Assistance" Control Unit ID A5.


A13:

In OBDeleven app first connect to your car than go to --> "Garage" --> click on your car --> scroll down to "Control Units" --> Scroll down to number 13 "Adaptive Cruise Control"

First I'd advice to clear all the Errors/Faults if you have them. Press "Faults" --> and clear all codes

Go back and press on "Long coding" --> go to the third tab with the symbol "01010110" --> press the edit pencil button --> copy your code and screenshot it if you haven't already --> delete all of it and paste my code:

Long Code A13 for Travel Assist:

06 03 10 F3 40 71 40 45 12 47 40 08 00 00 40 C5 AF 40 20 00 00 00 00 00 00 00 00 00 00 00 00

press done and swipe to code.

If it errors out than my code may not be compatible with your car.

If it does, it may show in the beginning some error codes. Don't worry, clear all the Faults and if nesecarry do a "Reset", like soft reset or "Key Off On Reset". Also lock and unlock car may help.

If it still shows errors that may just because we still have to change Control Unit ID A5 "Driver Assistance".

Long Code A5 for Travel Assist:

00 08 30 6E 7F 93 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

again clear all faults before and after the change and always copy your default long code before changing anything.

If error messages still exist, try some Reset modes or go out of the car and lock it and unlock it again and clear all Faults. If it still shows errors on the Dashboard, I would advice you to use other codes here on this Forum or go back to your default one, don't forget to change both A5 and A13.

Hurray! if it works for you, but you will soon realize that Travel Assist works but all 10s it tells you to move the steering wheel. That's bc like me you don't have a capacitive Steering wheel.

You can buy this chip from Aliexpress, but oh boy it will be hard to install it. See other posts on this forum for installation. If you don't think you can do it than don't. But if you have some experience than sure do it. I personally had no experience on working on cars, but I was able to do it alone after 2 days. Hardest part is to feel the spring to remove the centre part (Honk/Airbag). btw don't forget to remove fuse of the Honk otherwise it will be a loud party in your Garage. Anyway here is the Chip I used and has worked perfectly for 4 Months without problems, it's just plug and play. Yes it's Aliexpress, yes it's Chinesem yes it takes about 2 weeks to arrive, yes it's kinda shady. First and also last time I used this website. Good Luck.

Name on Aliexpress:
"Module mains libres permanent, KLR pour ID3, ID4, ID5, ID6, lien personnalisé"

Link:
fr.aliexpress.com/item/1005005886141093.html?spm=a2g0o.order_list.order_list_main.5.66925e5bufL7Qz&gatewayAdapt=glo2fra 

If it worked hurray! Now you can use Travel Assist, Hands free. But if it doesn't: go to A13 and or A05 and go to long coding and check if "Klr" is set to "coded" (Klr stands for Kapazitives Lenkrad btw) but it should be because that's the code. If it still doesn't go to A13 and or A05 and set "capacitve Steering wheel" to "coded" or "installed". 

Deactivating peep sound when putting into R (Reverse):

1. navigate to control unit 76
2. select 'adaptation'
3. select 'park assist activation tone'
4. select 'off'
5. press and hold to apply changes

Disabling welcome screen (where you always have to press "ok"):

Info: This will break some features! Apps that will break: "Store", "ID. Software", "Information", "Games" and "We charge" as well as "User". Personally I don't care, since I only use Carplay/Android Auto and rarely used these functions anyway. Btw EV rout planning will still works and charging stations will be added automatically in the Nav system. Also App still works, both location data and start clima via App. But I don't know if Car2x and Plug and charge still work. I never used both of these systems. Also after applying the change that user screen came up again so I cleared the Faults and did a "Key Off on reset" and the User welcome sreen never came up again.

1. go to control unit 8125 "Application server entertainment"
2. go to "Adaptation"
3. search "Function configuration pso"
4. I had to put "Iaa function new" to be deactivated. It also was the only one of the 3 which was set to activated

Thank you to all the people on this Forum for making my experience with my VW ID.3 a better one and I hope I was able to help someone else too

Btw here are even more things that you can easily change on your car if you wish:

Link:
 forum.obdeleven.com/thread/17715/obdeleven-coding-list-possibly-enyaq