|
|
Post by EJD ID.4 (Germany) on Oct 13, 2022 9:00:18 GMT
Hi everyone,
is it possible to check if the steering wheel has capacitive sensors without deinstalling it? I upgraded my ID.4 Pro (build 06-2021) with travel assist but I am not sure if I can activate the KLR - I understood that this would make it unnecessary to force the steering wheel every 15s.
Thanks
|
|
|
|
Post by nokkeri on Oct 16, 2022 10:30:06 GMT
It gives you lot of errors even on dashboard if it is coded wrong. If you happen to have capacitive steering wheel but if the coding option is set to "not installed" it gives you errors. It is not like they have installed those capacitive steering wheels on cars but features are just disabled by coding. There is also tiny hole at the back of steering wheel facing towards column. If you turn your steering wheel it gets just visible. You have necessary electrics module installed if you can't put stick there more than 5mm deep. If you can, then you don't have the module and most likely capacitive coils either. This all has been discussed in this thread earlier and you can even find pics describing all this also.
|
|
dxb
New Member
Posts: 5
|
Post by dxb on Oct 17, 2022 5:31:07 GMT
Please need support. I have purchased new wheel with capacitive sensor on it. And got it installed and coded it by reading given instructions in this page ( 00 06 30 2E 17 91 00 64 16 24 20 00 00 . Now the travel assist button is on, but there is fault and massage in orange color says travel assist not available. Can you please refer to below pictures and tell me what to do next. Note. I have driven the car on highway expecting the car will recognize the lines. But nothing happened.    |
|
|
|
Post by nokkeri on Oct 18, 2022 7:44:04 GMT
As mentioned before in this topic: you have to change coding of module 13(adaptive cruise control) also. There is bit/option "capacitive steering wheel". Change that from "not installed" to "installed". There is also a bit/option "travel_assist", but I think it ain't necessary to change for travel assist to work.
|
|
dxb
New Member
Posts: 5
|
Post by dxb on Oct 18, 2022 9:17:26 GMT
|
|
|
|
Post by nokkeri on Oct 18, 2022 12:12:18 GMT
Should work like that! At least it works on European variants!
|
|
dxb
New Member
Posts: 5
|
Post by dxb on Oct 18, 2022 13:56:06 GMT
Should work like that! At least it works on ]Ok on back of steering it has cable socket. But no pins so it means that capacitive sensor is not giving feed back. That's the reason of error. I was thinking it's for heater. But I think I was wrong.  |
|
|
|
Post by madfly on Oct 20, 2022 8:09:53 GMT
Hi everyone, is it possible to check if the steering wheel has capacitive sensors without deinstalling it? I upgraded my ID.4 Pro (build 06-2021) with travel assist but I am not sure if I can activate the KLR - I understood that this would make it unnecessary to force the steering wheel every 15s. Thanks Yes. I found it in my Skoda enyaq, and it’s probably the same in the IDs. Look in the live data of module 19 Gateway and search for Steering Wheel touch Recognition, status. |
|
slate
New Member
Posts: 17
|
Post by slate on Nov 15, 2022 18:01:40 GMT
I can confirm that this works after 3.0 OTA also. At least TA activation, unsure about capacitive steering wheel, since I dont have one.
TA works differently with 3.0. You choose from the TA button if you want to run TA or ACC. When ever you push set, it activates directly either TA or ACC based on your selection.
|
|
|
|
Post by mustang24 on Nov 17, 2022 17:39:43 GMT
The only way to get rid of the multiple installation error is with ODIS.According to a person with avatar andykoe who knows a lot about this forum stuff.
passat b8
 Does this error got fixed over time? Im getting a capacitve steering wheel retro fitted. Do you still like the retro fitted wheel or does it has downsides |
|
|
|
Post by nokkeri on Nov 19, 2022 8:45:12 GMT
The error stays but it doesn't affect anything. Only hassle has been with 2.4. update which reseted all mods and also parametrization of wheel which resulted error codes and the dealer didn't really understand what was all about. 3.0.0 ota had no problems at all.
I think capacitive wheel is worth it! And travel assist with it is very good. Way better than tesla autopilot as you can just lightly keep your hand on the wheel and car drives without nagging. By holding wheel firmly you can teach the car the position on lane where you like it to drive(for example near edge of lane as the very center is usually more worn here due winter tires).
|
|
|
|
Post by mustang24 on Nov 20, 2022 13:54:32 GMT
Thanks for your answer. Where is this error visible?
|
|
|
|
Post by nokkeri on Nov 20, 2022 19:01:40 GMT
It is only one of many error codes the car gathers. If I remember correctly it is on gateway module error log. So it is no way visible for the driver. You only see it if you read the error codes by obd reader.
|
|
|
|
Post by mencey on Nov 22, 2022 15:35:33 GMT
Does anyone know the exact size of the given tool, key to remove the steering wheel?
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Nov 22, 2022 18:18:27 GMT
I’m a little bit lost with all the code depending on id3 id4 and so on.
Just have my new id4 pro version in France normally the documentation say capacitive steering wheel so…
Other problem I’m on 3.0 version and I read that only one change is mandatory so what I have to do ?
Only A5 or stg13 ?
Thanks in advance
Mencey seem to be the expert for that…
|
|
|
|
Post by mencey on Nov 22, 2022 21:10:23 GMT
If the capacitive steering wheel is already configured on the STG13, you should only change A5
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Nov 22, 2022 22:04:15 GMT
Ok thanks.
To sum up can you repost the 2 hex series in activated mode ?
|
|
|
|
Post by mencey on Nov 23, 2022 21:56:41 GMT
Módulo 13 después de TA y volante capacitivo
01 03 18 F1 40 71 40 45 12 47 40 08 00 00 40 C5 AF 40 20 00 00 00 00 00 00 00 00 00 00 00 00
Módulo A5 después de TA y volante capacitivo
00 08 30 2A 17 01 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Nov 24, 2022 14:34:41 GMT
I just modified the A5 with that and it’s OK:
00 08 30 6A 15 45 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
what does your A13 code add ?
Now I tried to put KLR in coded but I have an error
Still don’t know if I have a capacitive wheel drive
|
|
|
|
Post by max83tv on Nov 24, 2022 16:07:23 GMT
Hi all, do you know how to activate travel assist on ID.3 with native 3.0 software?
|
|
|
|
Post by vinzenz1973 on Nov 27, 2022 21:43:29 GMT
STG A5 Werkseinstellung 00 08 30 2A 15 01 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 STG A5 TA ohne VZE 00 08 30 2A 15 01 10 E4 16 A4 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 STG A5 TA mit VZE 00 08 30 2A 15 01 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I habe coded my id3 pro with SW 2.4 like this. The Symbol for the TA is now is enlightet , but I cannot activate the TA… Have I forgotten something? |
|
|
|
Post by MaxID.3 on Dec 4, 2022 13:11:31 GMT
You must activate ACC ( Set or Res) at first then press TA button.
|
|
|
|
Post by MaxID.3 on Dec 4, 2022 13:36:21 GMT
Hello,
I own an ID.3 1st Plus with v2.4 software and I could successfully activated the TA.
I just tried it only on a very short drive, sometime I went a bit close to the side and seemed like it took a bit sharp turns sometimes, maybe some more practice is needed. 🙂
I’m not sure whether I’ve got capacitive steering wheel or not, and apart from coding the “A5” I don’t know whether other modifications are necessary to make it more smooth or precise?!
You can see my settings and my questions below:
My factory setting of “A5” control unit:
00 08 30 2E 15 11 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
After coding the “A5” control unit for the TA:
00 08 30 2E 15 01 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
In my case I just replaced 11 08 E0 06 with 01 10 E4 16.
I did not touch anything else, and my current “A5” settings are:
KLR: not coded - question: should it be modified to coded?
Ea variant: ea_variant 2
Hc variant: hc_variant 2
Hc point of intervention: early via menu
I also did not modify the “13” control unit, and current settings are:
Capsitive steering wheel: not installed - question: should it be modified to installed?
Travel assist: deactivated. - question: should it be modified to activated?
Thanks and regards
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Dec 4, 2022 15:07:44 GMT
Same question on ID4 i have exactly the same modified code and options in A5. All is OK but don’t know how to use my capacitive steering and even not sure i have one…(Pro Business french version)
|
|
|
|
Post by cptbill on Dec 6, 2022 9:35:47 GMT
Hell guys
Life pro version of id3
I used the below code and successfully enabled
Travel assist.
STG A5 TA mit VZE
00 08 30 2A 15 01 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Thing is. I am almost sure that my steering wheel is capacitive. Why?
If i dont touch the steering wheel (which is leather and heated)for a long time, while i am on lane assist and i get the ping pong effect, it will warn me to touch the steering. When i simply touch it, the message goes away.
However in travel assist i have to make a small steering wheel adjustment every 15 seconds for the car to understand that i am there.
Maybe i have to make adjustment on the stg13 also?
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Dec 9, 2022 21:52:31 GMT
Good informations will try that
|
|
|
|
Post by damian9 on Dec 16, 2022 13:40:11 GMT
.
|
|
|
|
Post by damian9 on Dec 16, 2022 13:42:04 GMT
The error stays but it doesn't affect anything. Only hassle has been with 2.4. update which reseted all mods and also parametrization of wheel which resulted error codes and the dealer didn't really understand what was all about. 3.0.0 ota had no problems at all. I think capacitive wheel is worth it! And travel assist with it is very good. Way better than tesla autopilot as you can just lightly keep your hand on the wheel and car drives without nagging. By holding wheel firmly you can teach the car the position on lane where you like it to drive(for example near edge of lane as the very center is usually more worn here due winter tires). Have you updated your car to 3.0 via OTA? With the mods and the capacitive steering wheel? |
|
|
|
Post by nokkeri on Dec 16, 2022 14:59:04 GMT
Yes, I have! And friend of mine has same story. Ota3.0 with capacitive wheel retrofitted with no problems.
|
|
|
|
Post by damian9 on Dec 19, 2022 7:51:21 GMT
Thanks a lot! I will try then (hope it doesn't take too much to receive the OTA).
|
|
