My OBDeleven ID3 coding list +tips (possibly ID4,born,enyaq)

Hi all,



Over the past couple for months i've been scavaging the internet for obdeleven coding tips/tricks on my 2022 ID3 Pro Performance. I've come to a point where i feel like i consider the car 'done'.



Getting the knowledge was not easy as information was spread across multiple websites. As a way of paying homage to the coding community, i will compile my changes in a single post. This will probably be my first and last post.

Its good to know that
- The 2.4 software update resets almost all previously applied coding
- Software 3.0 resets most coding but not all. Lane assist memory and travel assist stays the same.
- You need an OBDeleven pro subscription to perform most if not all tweaks described below
- you need SFD acces to perform changes (comes with pro subscription)
- As the ID3, ID4, Cupra born and skoda Enqay share the same platform and infrastructure, most mods should work on either cars


Coding list

Disabling the seat belt chime (handy when moving car to/from charge point)
1. Navigate to control unit 5F
2. select 'adaptation'
3. select 'safety belt warning' 
4. Select 'belt warning'
5. Select 'off'
6. press and hold to apply changes

Activating travel assist (VW version of Tesla autopilot)
Good to know:
- This code will work if your car is already equipped with: Lane assist, sign recognition, cruise control
- side parking sensors are not needed for this feature to work
- as you do not have the capacitive wheel, you'll need to move the wheel every 15 seconds
- i would strongly recommend disabling EA (Emergency assist) afterwards, as not having the capacitive wheel sometimes triggers an error (which causes the car to start braking)
 
1. navigate to control unit A5
2. select 'long coding'
3. click the top right '0/1' icon
4. long press the white area so that you're able to copy/paste 
5. paste the following code: 0008302A150110E4162420000000000000000000000000000000000000000000
6. press and hold to apply changes

- optional - 
6. look for 'emergency assist variante' in the list
7. select 'not_coded'
8. press and hold to apply changes

Activating lane assist memory function (so that the stupid thing stays off)
1. Navigate to control unit A5
2. select 'long coding'
3. select 'Configuration_for_lane_departure_warning_kl15'
4. select 'last setting'
5. press and hold to apply changes

Activating automatic high beam (for regular/non matrix headlights) 
note: press the high beam stalk forward once to activate after applying changes

1. navigate to control unit A5
2. select 'long coding'
3. select 'afs coding light assist'
4. select 'high beam assist'
5. press and hold to apply changes
6. navigate to control unit 19
7. select 'adaptation'
8. select 'Lichtsteuerungsmodul'
9. select 'AFS, FLA, high-beam (GLW, MDF)
10. press and hold to apply changes

Adjusting the light sensitivity (so that main beams are always on)
Note: you can also decrease the values if you want the main beams to be activated later)

1. navigate to control unit 09
2. select 'adaptation'
3. select 'RLS night sensitivity'
4. increase day lux to 1000 
5. press and hold to apply changes

Lowering the speed at which 'autobahn headlights' activate
Note: normally the beams rise slightly at 140 km/hso that you can see further. you can lower this bar

1. navigate to control unit 09
2. select 'adaptation'
3. select 'RLS_Lights_for_autobahn'
4. select 'pv autobahn on'
5. decrease value to 100
6. press and hold to apply changes

Allow for Daytime running lights (DRL) to be switched on/off via in car menu

1. navigate to control unit 19
2. select 'adaptation'
3. select 'daytime running light' / tagfahrlicht
4. select 'Tagfahrlicht Aktivierung durch BAP'
5. change value to active
6. press and hold to apply changes

allow for 'auto central locking' (based on speed) to be switched on/off via in car menu

1. navigate to control unit 09
2. select 'adaptation'
3. select 'ZV autolock'
4. select 'Menuesteuerung ZV Autolock-Unlock'
5. select 'adjustable'
6. press and hold to apply changes


Allow the car to overtake on the right (while cruise control is activated)
Note: this stops your car braking when traffic on your left is slowing down

1. navigate to control unit 13
2. select 'long coding'
3. select 'overtaking right prevention'
4. change value to 'deactivated'
5. press and hold to apply changes

Close windows automatically when locking the car
note: don't put your fingers in between the door/glass 

1. navigate to control unit 19
2. select 'adaptation'
3. select 'zv komfort fensterheber'
4a. select 'Kimfortschiliessen Brasilie', change value to 'active'
4b. select 'BAP Kimfortschiliessen Brasilien'. change value to 'active'
5. press and hold to apply changes

Change the amount of turn signal flashes when you turn press the handle 

1. navigate to control unit 19
2. select 'adaptation'
3. select 'light_control'
4. select 'Komfortblinken Blinkzyklen' / 'comfort flasher set point'
5. change value to desired number of blinks
6. press and hold to apply changes

How to make the climate control circulate more air (whilst in AUTO)
1. navigate to control unit 08
2. select 'adaptation'
3. select 'blower adjustment'
4. select 'tuning with more air in cooling operation'
5. press and hold to apply changes

Unblock certain menus while driving 

1. navigate to control unit 8125 (application server 3 system 1 infotainment)
2. select 'adaptation'
3. select 'locked menu contents'
4. Change all "blocked" values to "non_blocked"​
5. press and hold to apply changes

Have the rear lights activated when front daytime running lights are on (DRL)

1. navigate to control unit 19
2. select 'adaptation'
3. select 'daytime running light'
4. select 'Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht​'
5. change value to 'active'
6. press and hold to apply changes

How to disable annoying BEEP when activating reverse gear

1. navigate to control unit 76
2. select 'adaptation'
3. select 'park assist activation tone'
4. select 'off'
5. press and hold to apply changes

How to toggle brake disk drying (cleans brakes periodically  when it rains)

1. navigate to control unit 03
2. select 'adaptation'
3. select 'brake disk drying'
4. select the level of brake drying you want
5. press and hold to apply changes




Tips

How to put the car in complete silent mode / how to disable e sound generator'
1. open the bonnet
2. open the fuse box in the top right corner
3. remove the 7.5 amp fuse in the 'F12' position (middle row, second from bottom)
4. close everything back up and enjoy total silence
5. reinsert fuse if you want to revert changes

How to put the car in drift mode (completely disable any form of traction control)
1. open the bonnet
2. open the fuse box in the top right corner
3. remove the 40 amp fuse in the 'f15' position (bottom left corner
4. close everything back up and ignore all the error messages
5. enjoy drifting / lose your license / try not to crash
6. reinsert fuse if you want to revert changes

How to quicly turn on/off seat heating (shortcut)
1. press both temperature buttons at the same time (same side)


Good luck coding everyone! Remember that you can always revert settings. If applying changes doesn't work, reconnecting to the OBDeleven module, and then rescanning control modules might do the trick