|
|
Post by vwjap on Apr 2, 2024 14:55:39 GMT
It will be hardware (new lights and a wiring harness)
|
|
|
|
Post by chrispie on Apr 2, 2024 16:17:15 GMT
Does anyone know if I can set dynamic indicators on a golf gtd mk7? Depending on the type of your current taillights, which need to be of the LED type, and if so, you could consider a set of these from Aliexpress:  look for item #1005004488294501 or similar to purchase in your own language & region and make shure there's the option for free return in case they might not work and / or not meet your expectations Sceptical but curious if stuff like this actually would work, I ordered a set for my wife's 2015 mk7 (with original led taillights). To my big surprise this ~30Euro empirical experiment actually works without any codig or errors; in optical perception the result of time delayed light-up of the inner and outer led bars provides some similarity to genuine dynamic turn-signals. If this compensates the price difference is up to you and in this respect the ' free return' option is essential. I also exchanged the turn-signal led bars in the external rear view mirrors of both our MK7 and MK7,5 cars. (Aliexpress item# 1005004775587578 or similar) There are plenty of tutorials on youtube about how to replace; it's a piece of cake 30 minute job; double that if you also want to clean out the mirror interior and servo-mechanism. Since the dynamic replacements are actually far more bright than the stock-oem led bars in the mirrors, I can recomend this <10 Euro replacement to all MK7 owners. See example of the differences |
|
|
|
Post by dv52 (Australia) on Apr 2, 2024 20:38:19 GMT
chrispie : Hi, Hmm......... yes, I understand your your skepticism about allixpress stuff (I reckon that I've had lots more disappointments than successes when buying their stuff). However, I suspect that your assessment in the case of item #1005004488294501 is more about expectation (no offense intended) Again with no offense and notwithstanding the seller's claim that their item transforms normal LED turn-signal to dynamic type, it's a bit of a stretch to call the end result "dynamic turn signals". A more accurate description is "time delayed turn-signals"
Clearly the Aliexpress item does not (can not) achieve dynamic turn-signals because it does not have the circuitry for LED chasing. As vwjap has indicated, "dynamic turn-sgnal" involves sequential illumination of the individual LEDs within each of the inner/outer fittings. For this to happen, the laws of electricity demand that EACH individual LED is controlled by the LED chaser circuits. Obviously, access to each separate LED can NOT occur by simply adding an external device to the factory tail-lights
Don
|
|
|
|
Post by chrispie on Apr 3, 2024 8:50:01 GMT
Hi Don,
Thanks for your rightful complement!
From what I haven't repressed from my engineering education some 40 years ago I must confirm that you’re absolutely right about the technology behind dynamic vs. time delayed LED control.
Perhaps I should have emphasized in my post that, in optical perception the result provides ‘some similarity to’ rather than the representation of genuine dynamic turn-signals.
To what extent this appeals to someone (and if the difference compensates for the pricing) seems to be an individual matter. In this respect the 'free return' option is essential.
Cheers, Chris
|
|
|
|
Post by pi3trucha on Jul 20, 2024 14:05:32 GMT
|
|
|
|
Post by riczzz on Jul 26, 2024 16:31:42 GMT
Hi, Did anyone figure out a way to increase the time for the lane assist to 60 secs via obdeleven longcoding? There is already a way to do this but u need to do it with a cable and some software (more info here: github.com/Mr-MIBonk/Lane-Assistant-60-Seconds)There are several datasets in that project that show what are the correct coding for each vehicle. Maybe we could compare the bits that need to be changed and do it ourselves manually? |
|
|
|
Post by mathi9020010 on Jul 31, 2024 12:53:06 GMT
Its not possible without "changing" the dataset. That has to be done with ODIS or VCP.
End of story.
|
|
|
|
Post by biolaxy on Aug 11, 2024 19:40:17 GMT
Its not possible without "changing" the dataset. That has to be done with ODIS or VCP. End of story. If this is true, how can OBD11 do that with the One Click Apps? I thought everything that is possible in the apps also works in long coding. |
|
|
|
Post by ph3nix1980 on Sept 6, 2024 13:01:07 GMT
Its not possible without "changing" the dataset. That has to be done with ODIS or VCP. End of story. If this is true, how can OBD11 do that with the One Click Apps? I thought everything that is possible in the apps also works in long coding. can confirm it can be done with an app from OBD11, at least I did it on my 2019 Tiguan (enables extended lane assist + traffic traffiic jam assist + 60s automatic drive). It costs 400 credits but in my case doing a lot of highway it’s worth it. |
|
|
|
Post by paperboy on Sept 8, 2024 6:28:33 GMT
If this is true, how can OBD11 do that with the One Click Apps? I thought everything that is possible in the apps also works in long coding. can confirm it can be done with an app from OBD11, at least I did it on my 2019 Tiguan (enables extended lane assist + traffic traffiic jam assist + 60s automatic drive). It costs 400 credits but in my case doing a lot of highway it’s worth it. What phone did you use? As it didn’t work on my iPhone, when OBDII developers said it should’ve worked on my Volkswagen 2018 Golf Alltrack! They refunded me the 400 credits and said I should try it again on another phone, but I’m reluctant to try as it completely turned off lane assist all together and the created a one click app to recalibrate A5 camera, which turned lane assist back on. I want the extended lane assist & traffic jam assist too. |
|
|
|
Post by vwjap on Sept 15, 2024 20:56:37 GMT
Its not possible without "changing" the dataset. That has to be done with ODIS or VCP. End of story. If this is true, how can OBD11 do that with the One Click Apps? I thought everything that is possible in the apps also works in long coding. No, the vim app changes the eeprom data, so not all apps change long coding or adaptions, so I guess this app changes the dataset, just because the obdeleven app doesn’t allow you to change the dataset doesn’t mean the equipment can’t |
|
|
|
Post by ph3nix1980 on Sept 25, 2024 19:00:57 GMT
If this is true, how can OBD11 do that with the One Click Apps? I thought everything that is possible in the apps also works in long coding. No, the vim app changes the eeprom data, so not all apps change long coding or adaptions, so I guess this app changes the dataset, just because the obdeleven app doesn’t allow you to change the dataset doesn’t mean the equipment can’t I used the ODB11 on an iPhone 12 Pro. To be fair I’m pretty sure the option want there in 2022-23, but it is in 2024 and it works like a charm on my Tiguan My19. Maybe Glof is not supported? Try to ask support and hope you can do it. |
|
fcuk
New Member
Posts: 2
|
Post by fcuk on Oct 5, 2024 12:49:16 GMT
Hello guys,
I've got a 2018 Golf R MK7.5.
Bought OBD11 Pro and some credits to play around with some adaptations.
I tried the 10 color mod, however it does not have the stock blue. The 30 color mod does not work because I'm missing the color list 2 menu.
I've got a few questions:
I've tried to add the mod manually and through the one click app. Now, none works. I cannot add it manually and I cannot add it via the one click app. I can only change the brightness on the interior lightning menu.
The other question is, is there a way to get back to stock? I did not create any sort of backup (not sure if it's possible anyway via obd11) but I would like to reset the color back to stock to match the interior lighting and accents (blue).
Many thanks
|
|
|
|
Post by vwjap on Oct 5, 2024 14:20:20 GMT
Do you still have background lighting menu, or is brightness under lights?
If it’s under lights, just change the Vehicle variant to something else then back again on dash and 5f
If under background lights then either remove background lighting menu, and do above, or go into the colours and change the RGB to blue
|
|
fcuk
New Member
Posts: 2
|
Post by fcuk on Oct 5, 2024 14:45:43 GMT
It worked thanks.
I've used blue RGB code but it's too dark.
Used a ligther version that seems like it's closer to stock.
Do you happen to know the stock blue rgb code? This is what I'm using atm rgb(0, 150, 255)
Also quick edit, how can I enable ambient lighting to be on during the day?
|
|
|
|
Post by eotaci on Oct 7, 2024 13:42:33 GMT
Hello, I have a 2018 polo and I have unit 3Q0035819C. There is no App-Connect button on the media screen of my vehicle. When I did research, I found that this unit does not support CarPlay and AndroidAuto. Then with OBDeleven 5F Multimedia -> Adaptation -> Vehicle Configuration: Google GAL: Active Apple DIO: Active MirrorLink Active Smartphone interface for Rhmi: Activated Multimedia -> Long Coding -> Byte 19 USB: Selected as “ Usb ipod ” When I do the above and look at my media screen again, the App-Connect button is there but when I click on it, it says “Starting App-Connect... “ and does not continue. I don't understand this situation  And if I really have CarPlay and AndroidAuto, can you help me how to make them work? |
|
|
|
Post by vwjap on Oct 8, 2024 16:33:12 GMT
It worked thanks. I've used blue RGB code but it's too dark. Used a ligther version that seems like it's closer to stock. Do you happen to know the stock blue rgb code? This is what I'm using atm rgb(0, 150, 255) Also quick edit, how can I enable ambient lighting to be on during the day? Think I set mine to 0,102,255 |
|
|
|
Post by vwjap on Oct 8, 2024 16:34:44 GMT
Hello, I have a 2018 polo and I have unit 3Q0035819C. There is no App-Connect button on the media screen of my vehicle. When I did research, I found that this unit does not support CarPlay and AndroidAuto. Then with OBDeleven 5F Multimedia -> Adaptation -> Vehicle Configuration: Google GAL: Active Apple DIO: Active MirrorLink Active Smartphone interface for Rhmi: Activated Multimedia -> Long Coding -> Byte 19 USB: Selected as “ Usb ipod ” When I do the above and look at my media screen again, the App-Connect button is there but when I click on it, it says “Starting App-Connect... “ and does not continue. I don't understand this situation And if I really have CarPlay and AndroidAuto, can you help me how to make them work? SWaP, so you need to enable FEC’s Unless you hack/patch or have a discover pro |
|
|
|
Post by eotaci on Oct 9, 2024 17:33:07 GMT
Thank you vwjapSo if I download and install the VW_ZR_P0480T_ FEC_ALL_CID_OFF_SPORT_FIXED patch on my unit from mibsolition.one, can I write Fec/SWaP now? |
|
|
|
Post by stefanadrian on Oct 12, 2024 0:21:44 GMT
weke : It depends on whether your car has the high-beam lights controlled by the hex09 module. The easiest way to determine this is to post-up the settings for Leuchte10SHUTTER LB23 and Leuchte11SHUTTER RB22. These are Leuchte-sets (a bunch of 19 x adaptation channels) in the central electrics module (@ address hex09)
If these Leuchte-sets are factory activated on your car, it might be possible although I would caution that using the high-beams with the low-beams has the real possibility of dazzling on-coming vehicles. I suspect that you will need to dim the high-beams considerably to make the combination safe
The other consideration is whether setting-up the combination of lights is road legal in your country. I have absolutely no knowledge of the road lighting laws where you drive - and I take no accountability for many advice that I provide regarding this aspect of the tweak
But theoretically, it is doable with Leuchte-programming (I think). So what would happen is that the high-beams could be programmed to switch-on with the low-beams (at much reduced illumination). This would not affect the normal operation of the high-beam function when the steering wheel stalk was either pulled, or pushed.
However, I'm not sure why you would want this facility - since I suspect that the requirement to considerably dim the high-beams would mean that the combination wouldn't result in much additional illumination at the front of the car!!
Don
Hello, I'm interested in this tweak. I checked my settings for Leuchte10SHUTTER LB23 and Leuchte11SHUTTER RB22 for A,B,C...G,H and it's 0. I can also provide a copy and post it here. I agree with you about dimming the light and not getting much additional lightning but i want it for the looks of it. |
|
|
|
Post by dv52 (Australia) on Oct 12, 2024 21:15:01 GMT
stefanadrian : If the SHUTTER Leuchte-sets have Lichtfunktion channels with the value 0 and if the lasttyp channels have the value is nicht aktiv, then the Leuchte-sets are disabled - so nothing can be done!! I assume that this car does NOT have halogen lamps in the high-beam lights
Don
|
|
|
|
Post by vwjap on Oct 13, 2024 10:49:41 GMT
Thank you vwjapSo if I download and install the VW_ZR_P0480T_ FEC_ALL_CID_OFF_SPORT_FIXED patch on my unit from mibsolition.one, can I write Fec/SWaP now? I dunno I haven’t got a technisat |
|
|
|
Post by stefanadrian on Oct 13, 2024 13:06:23 GMT
dv52 (Australia): yes it does not have halogen high beam. Thank you for the answer
|
|
|
|
Post by dv52 (Australia) on Oct 13, 2024 21:13:36 GMT
stefanadrian . OK, then the car almost certainly has Light Control Modules (LCMs) @ address D6, D7 and/or 29, 39 - check your SCAN report. Alas, these modules have no coding facilities that any diagnostic device can access! So, it's not possible to change the lamp behavior! Don
|
|
