DanMn
New Member
Posts: 3
|
Post by DanMn on Mar 24, 2021 11:45:51 GMT
I activated it as well, it really works stopping "bouncing" between lanes, but the same problem for me: it always warns that you have to keep hands on steering wheel.
It's normal, cars with travel assist optional have a capacitive steering wheel, that you don't have!
Anyone know which spec Leon’s have the capacitive steering wheel? Travel Assist not offered as an option in the UK but have a ‘first edition’ with good spec so I’m hoping it’s there as part of one of the existing systems. |
|
|
|
Post by newty on Mar 24, 2021 17:26:57 GMT
Those with Travel Assist have it. No travel assist - no capacitive steering.
There were a lot of issues with capacitive steering in the early days throughout VW, so I think Skoda and Seat did not have them in the first few months of production.
Again: Try to chance HC variante: Basic LDW is 0, Travel Assist is 2 - everything else - please try it out!
|
|
|
|
Post by szyszu on Mar 25, 2021 20:08:00 GMT
Hi, I've tested some of the described settings in new 2021 Cupra Leon ST 2.0 310ps, maybe that feedback will be useful for some of you  Successfully coded or already set up by dealer/producerDeactivate overtaking right prevention - coded, works well Lane Assist Warnings - coded, works well Lane Assist Settings - coded, works well Lane Assist Point Of Intervention - already in "early" position Doesn't work (explanation in brackets)Deactivate Stop Start - doesn't work (I was able to change the value but the start/stop system is still on) DRL In lighting menu - requires additional code to save the setting Rear DRL Lights - requires additional code to save the setting Staging - doesn't work (most likely because of the virtual cockpit) Additionally there is no possibility to turn off the sound-actor because it's not visible in any menu  That was the biggest disappointment after getting the car from dealer yesterday... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 25, 2021 23:10:10 GMT
We have turned of the sound actor on the cupra Formentor (same platform)
|
|
|
|
Post by szyszu on Mar 26, 2021 7:56:50 GMT
Hi, thanks for reply. I saw it, unfortunately there is no A9 (Structure Borne Sound) module available for Leon Cupra. Seems there are some differences in platforms, or it depends on firmware version, hard to say at this point... That really upsets me, I wouldn't buy the car if I knew it will be "snort-farting" like a cheap plastic toy...  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 26, 2021 13:20:15 GMT
I have put a suggestion in the Cupra thread.
|
|
|
|
Post by cioce on Mar 26, 2021 16:15:43 GMT
Disabled is the default setting for all new cameras, did anyone seriously testing what is reported here?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 26, 2021 21:41:51 GMT
cioce the point of this thread is to share what we see on the webb and for people to give feedback if stuff works or not. The community will then let us know if stuff is wrong or missing stuff. Thanks for the feedback I will update the list accordingly. Feel free to share any stuff you find so we can expand the list.
|
|
|
|
Post by clumpsypenguin on Mar 28, 2021 10:29:04 GMT
Hi
Does someone knows how to code kessy ?
I have seen that it is active in the general electronics settings, but i still have to use the keyfob.
Can someone send their settings from those who have kessy fully enabled?
|
|
DanMn
New Member
Posts: 3
|
Post by DanMn on Apr 10, 2021 14:48:37 GMT
Those with Travel Assist have it. No travel assist - no capacitive steering. There were a lot of issues with capacitive steering in the early days throughout VW, so I think Skoda and Seat did not have them in the first few months of production. Again: Try to chance HC variante: Basic LDW is 0, Travel Assist is 2 - everything else - please try it out! Only just received my OBDeleven so had my first play around with it. Turned on the early intervention in driver assistance which keeps nicely in lane over 35mph, but then setting HC variante to 2 seems to break that entirely. In the ACC control unit turning on ‘Travel Assist’ and setting ‘Capacitive Steering wheel’ to Installed gives me ‘Travel assist unavailable’ errors messages when starting the car, tried HC variante 2 again which gave me a second Travel assist error light on the dash so will continue trying the different HC variante number settings. |
|
|
|
Post by newty on Apr 10, 2021 15:41:39 GMT
So coding KLR and Travel Assist in cars which do not have the right buttons and Equipment will fail, so HC2 is not an option. Thanks for trying that!
Maybe you can go for HC1? Thats sounds most promising to me.
|
|
|
|
Post by sealen1 on Apr 13, 2021 23:19:40 GMT
Hi, new here but have been reading a lot of posts Anyway I was wondering if anyone knows if the settings for the automatic high beams are in the locked 09 unit? I would like to turn them off completely since they do a bad job in my opinion. Only way I have found in the car is to change the lighting mode from Auto to half beam. But you have to manually change this every time it gets dark (sigh). In my old car (Skoda Octavia) I could permanently disable this feature in a menu but the option to do this is not available on the new SEAT Leon ST eHybrid. I just know there is a setting somewhere but if it's in unit 09 I won't bother looking at the moment.
|
|
|
|
Post by pzautodiagnostika on Apr 18, 2021 11:49:40 GMT
hello please how to turn on the tail lights like drl in coding ? i have KL leon 2021 thx and where can i find the codes to unlock sfd protection ecus ? ? what coding you do for these cars? which worked |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2021 12:10:40 GMT
You cant unlock SFD using obd11, hopefully by end of 2021 they will have built and released the interface to allow this.
With regards to what works just read this and the other Golf 8 and Leon 4 threads you will see what others have done.
If the DRL on the rear is the same as the MK3 then the changes are in the 09 control unit and as far as I am aware its not possible to code with OBD11 as this is locked down.
As always happy to be proved wrong.
|
|
|
|
Post by sealen1 on Apr 27, 2021 13:19:25 GMT
So I do not have this Perso_HC option in the list. There is however a "Configuration_for_lane_departure_warning_KL15" that have the not_activated, activated, last_setting options. So have the label changed or do I not have the Perso_HC option?
EDIT
I found the answer in the other thread. It is that setting I need.
|
|
|
|
Post by sealen1 on Apr 27, 2021 14:12:29 GMT
Disabled is the default setting for all new cameras, did anyone seriously testing what is reported here? In my car, Enabled, is the default setting for Lane Assist Off Text. Will try to change this tomorrow. SEAT Leon ST eHybrid (FR) mfg month: 2021-03 |
|
|
|
Post by sealen1 on Apr 28, 2021 11:49:33 GMT
Just wanted to confirm again that coding the "Configuration_for_lane_departure_warning_KL15" to last_state and "Lane_assist_off_text" to disabled in module A5 works fine on my car.
|
|
|
|
Post by sealen1 on Apr 28, 2021 11:50:27 GMT
.
|
|
|
|
Post by sealen1 on Apr 28, 2021 11:54:40 GMT
Just wanted to confirm that coding the "Configuration_for_lane_departure_warning_KL15" to last_state and "Lane_assist_off_text" to disabled in module A5 works fine on my car.
|
|
|
|
Post by davidgballester on Apr 30, 2021 21:44:30 GMT
Hi.
I tested the lane assist set to early and it works like a charm. The thing is, now that it is active I get the "put the hands on the steering wheel" every 10 seconds even though they already on it. I have to actively move the steering wheel even when I wouldn't need to so I don't get this message, so having this is literally useless for me. Is there any way of removing this warning?
|
|
|
|
Post by cioce on May 4, 2021 9:31:36 GMT
|
|
|
|
Post by davidgballester on May 5, 2021 15:10:23 GMT
I don't have the option A9 (Structure Borne Sound) in OBD...
|
|
|
|
Post by davidgballester on May 5, 2021 15:10:50 GMT
I don't know if that's what you meant.
|
|
|
|
Post by tsofras on May 8, 2021 10:40:29 GMT
Hey guys , just received my obdeleven for my new leon kl FR
I wanted to enable the cupra dashboard but it seems that it is not working.
I found the View activations under adaptation sub menu ( many are writing that they have found it under long code don't know why) I had enabled all 16 but nothing happened.
The same with the logo change,it seems nothing is changing , any ideas?
|
|
|
|
Post by blikstjinder on May 8, 2021 21:40:40 GMT
tsofrasAfter coding it you can enable it in the dash views. Select view with the old dials(rev meter and speed meter) pres en hold OK while in the mid screen when the car is displayed.  Select view  In this menu you can select the view.  Now the Cupra view is under the views button on your steering wheel. Did you try this?
|
|
|
|
Post by tsofras on May 9, 2021 10:23:11 GMT
Oh thank you very much for your time , I had tried to push ok and I can see only the menu for the lane and front assist.
I'll give it a try again later and I will update
|
|
|
|
Post by tsofras on May 9, 2021 15:09:49 GMT
Thank you again ❤️
I had to press ok for some seconds to find this menu so you where right I had enabled the cupra view finally
|
|
|
|
Post by blikstjinder on May 9, 2021 21:34:32 GMT
No problem! 👍
|
|
|
|
Post by mikey887 on May 11, 2021 20:14:44 GMT
newty did you manage to try out the different HC versions / get it to work any better?
|
|
|
|
Post by mikey8877 on May 13, 2021 20:42:09 GMT
newty just tried with HC variant 1 and early and it didn't seem to do anything , will try with variant 2 tomorrow for comparison
|
|
That was the biggest disappointment after getting the car from dealer yesterday...
