|
|
Post by giggioaudi on Nov 5, 2022 21:33:05 GMT
Hi guys, I retroffitted Top View System complete on my Audi A6 c8. Work Perfectly!
I want, Now, activate the ipa (i mounted the keys in console). The coding is complete?
|
|
|
|
Post by kamil11114 on Nov 26, 2022 10:56:33 GMT
Will it work on Audi A7 2021 with zFas A5 software 0364 ? Anyone found proper coding for steering also? EDIT: Doesn’t work for me. I cant code anything in module A5 getting’s this errors.  and also after coding 03 brakes simultaneously I got a ton of errors across all of the units… |
|
|
|
Post by bhanvadia on Jan 11, 2023 8:10:56 GMT
had same for me but went into Long coding by Bytes and Bits (0/1 symbol at top) value, and coded them. works perfectly, however i disabled MA steering as only need brake and dont want it to steer.
|
|
enry68
Junior Member
Posts: 54
|
Post by enry68 on Jan 16, 2023 18:09:51 GMT
Hello, I've the opposite beahviour respect to bhanvadia and kamil11114 . My car does not brake BUT the steering works fine. When the car encounter an obstacle the system reports on the cockpit a malfunction of the MA. This my coding: OBD11: Address: 0xA5 (Driver Assistance) Adaptation • Manouvering Assistant o Functional Deactivation (Not Active) o Breaking Intervention (Not Active > Active) o Steering Intervention (Not Active > Active) Long Coding • MA Maneuvering Assist (Not Installed > Installed) • MA Breaking (Not Active > Active) • MA Steering (Not Active > Active) Address: 0x09 (Central Electrics) Adaptation • Maneuvering Brake Functiontion (Not Activated > Activated) Address: 0x44 (Steering Assistant) Long Coding • Maneuvering Assistant (Not Active > Active) Address: 0x17 (Dashboard) Long Coding • Intelligent Park Assist (No > Yes) Address: 0x19 (Gateway) Adaptation • Installation List o Park Assistance (Not Coded > Coded) Address: 0x03 (Brakes) Long Coding o Byte 10 – Bit 0 (0 > 1) (01001000 > 01001001) o Byte 24 – Bit 7 (0 > 1) (00010010 > 10010010) What I've missed ? Where is the mistake? Thank to all people that wants to help me. Enry |
|
|
|
Post by bhanvadia on Jan 17, 2023 6:55:55 GMT
I did following changes.
Coding
Module 03 -> Byte 10 Bit 0 -> On
Module 03 -> Byte 24 Bit 7 -> On
Module 44 -> Byte 2 Bit 1 -> On (Maneuvering assistant On)
Module A5 -> Byte 44 Bit 6 -> On (MA Breaking)
Module A5 -> Byte 44 Bit 7 -> On (MA Maneuver assist)
Adaptation
Module 19 -> Installation list -> Parking Assitance -> coded
Module 09 -> Maneuvering Brake Function -> On (Was On by default)
After coding turn on camera and go to camera settings and enable Maneuvering Assistant
|
|
enry68
Junior Member
Posts: 54
|
Post by enry68 on Jan 17, 2023 16:11:19 GMT
Ciao,
On my opinion you have forgot this:
• MA Steering (Not Active > Active)
Enrico
|
|
|
|
Post by bhanvadia on Jan 17, 2023 18:12:05 GMT
intentionally. Just 2 post above. I did not want MA to interfere with steering, so did not code it. Just wanted brakes so my car dont get bumped by my SO or Driver while taking out from narrow parking spot.
|
|
tomo82
New Member
NOOB
Posts: 7
|
Post by tomo82 on Jan 21, 2023 22:24:10 GMT
Can some one tell me how to turn trailer maneuvering assist on for Q5 FY 2017 with long code helper on IOS?
|
|
tomo82
New Member
NOOB
Posts: 7
|
Post by tomo82 on Jan 22, 2023 0:06:55 GMT
I finally got the Trailer Assist to work. I am going to list all of the coding below, so that someone in the future will have it all in one place. Please note that I am using the OBDeleven Next Gen Pro on a 2020 Q8 Prestige with rear wheel steering. The coding may differ on other years or models. Please note that the Trailer Assist icon will not "light up" on your MMI unless you have the vehicle attached to a trailer, the wires plugged in, all of your trailer lights are functioning properly, and your rear liftgate is closed. Please also note that in order for the Trailer Assist to work, you must also have the Maneuvering Assist coded properly. It does not matter which one you code first. Here are the steps: Maneuvering Assist: 09 Central Electrics > adaptation > maneuvering assistant > activated 44 Steering Assistance > long coding > byte 2, bit 1 (active) A5 Driver Assistance > long coding > byte 44 > bit 5 (MA Steering Active) A5 Driver Assistance > long coding > byte 44 > bit 6 (MA Braking Active) A5 Driver Assistance > long coding > byte 44 > bit 7 (MA Maneuver assist installed) 19 Gateway > adaptation > installation list > parking assistance > coded Important note: Make sure to code and swipe the installation button at the same time for the following two steps since they apply to left and right brakes and must be coded the same: 03 Brakes > long coding > byte 10 > bit 0 > active 03 Brakes > long coding > byte 24 > bit 7 > active Trailer Assist: 44 Steering Assistance > long coding > byte 1, bit 2 (trailer maneuver assist active) 46 Comfort System > long coding > byte 4 > bit 7 (trailer monitoring) 09 Central Electrics > long coding > byte 28 > bit 7 (ARA installed) A5 Driver Assistance > long coding > byte 15, bit 4 (FW ARA BCM installed) A5 Driver Assistance > long coding > byte 54 > bit 6 (TMA trailer maneuver assist installed) A5 Driver Assistance > long coding > byte 54 > bit 7 (TMA trailer maneuver assist image processing installed) 5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant > activated 5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant over threshold high > activated 5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant 0x36 > activated 5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant msg bus 0x36 > terminal 15 IF YOU HAVE REAR WHEEL STEERING YOU NEED TO PERFORM THE FOLLOWING ADDITIONAL STEP: 09 Central Electrics > long coding > rear axle steering > Hal not available Regarding the rear wheel steering setting, I intend to turn this to "not available" when trailering and to "available" when not trailering. I hope this helps someone in the future. Thank you everyone for your patience. Wanted to try this but missing all options in A5? |
|
|
|
Post by phildon777 on Feb 1, 2023 5:58:54 GMT
Hello together,
Can someone help me?
Yesterday i coded the Maneuvering Assist on my Audi Q7 MY2020.
It seems everything is working except the braking, even the Steering is working.
My Q7 has the 12 Sensors, Top View (4 Cameras), ACC, Active Lane Assist and almost everthying what you can order.
But why isn't the braking working?
My Coding:
STG 09 > Anpassung > Kanal "Rangierbremsfunktion" > Wert auf "aktiviert" setzen
STG 03 > Codierung > …
> Byte 10 > Bit 0 aktivieren
> Byte 24 > Bit 7 aktivieren
STG 44 > Codierung > Byte 02 > Bit 1 aktivieren ("Manövrierassistent,0=nicht aktiv / 1=aktiv")
STG A5 > Codierung > …
> Byte 44 > Bit 5 aktivieren ("MA_steering,active")
> Byte 44 > Bit 6 aktivieren ("MA_breaking,active")
> Byte 44 > Bit 7 aktivieren ("MA_Maneuver_assist,installed")
STG 19 > Verbauliste > "10 - Einparkhilfe" aktivieren
STG 5F > Anpassung > …
> Kanal "Car_Function_Adaptations_Gen2-menu_display_pdc_over_threshold_high" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_List_BAP_Gen2-VPS_0x0B_msg_bus" > Wert auf "Klemme 15" setzen
> Kanal "Car_Function_List_CAN_Gen2-PDC_audio_lowering" > Wert auf "verfügbar" setzen
> Kanal "Car_Function_List_CAN_Gen2-PDC_audio_lowering_msg_bus" > Wert auf "Klemme 15" setzen
The coding was fully accepted and there are also no Faults in the STGs.
My A5 STG has the SW-Version 0293 (4KE907107AM)
For me this looks Good so far, no?
So what could be the problem?
Greets PhilDon
|
|
|
|
Post by phildon777 on Feb 1, 2023 19:37:28 GMT
Edit:
Hmm, strange, braking worked 2 times today through the Maneuvering Assist, also it gave me the message that the system was braking because i was to close to the obstacle, i tried it on a real car. But now i tried it again and it didn't work, but it is dark outside, can this be the problem? Maybe the system needs good light to work?
And i have one fault in the STG 46,
46 Comfort System
System description: BCM2 MLBevo
Software number: 8W1907064AP
Software version: 0542
Hardware number: 8W1907064P
Hardware version: 044
Faults:
U101300 - Control module not coded
static
Priority - 4
Malfunction frequency counter - 1
Unlearning counter - 119
km-Mileage - 26171 km
Dynamic environmental data - 3A3E2F3D2F3D2F0617501B015A1004E00000000000720082010001001A0100000001175600000400
date - 2023-02-01 20:05:00
The other STGs are fine, no faults.
Btw i've also coded the Trailer Assist, can this be the problem?
|
|
|
|
Post by phildon777 on Feb 2, 2023 21:48:11 GMT
Ok, i think it works how it should be, tested it also during the night, you have to come really really close to an obstacle for the Auto Braking.
|
|
|
|
Post by bhanvadia on Feb 3, 2023 7:16:07 GMT
Found original car with company fitted MA, and MA_Steering is off by default. So I guess we never needed MA_Steering as Steering and Braking both dont function together.
|
|
|
|
Post by phildon777 on Feb 3, 2023 7:47:34 GMT
For me both works together, on your PDC screen you see also the Steering Wheel and Brake Symbol on the Cars Roof.
What we need now, is a solution for the Trailer Assist in combination with the Rear Axle Steering, i don't like the workaround to disable rear axle steering.
Before i bought the Q7 MY2020 i had a Q7 MY2016 with factory installed Trailer Assist and Rear Axle Steering and there both was working together, so it must be possible on the MY2020 also, because in Germany you can also order the Facelift with this 2 Options together
I found some differences in the STG "CB" between MY2020 and MY2016, on MY2016 in Long Coding, "ARA" is Active and Steering Type is set to Type 3 instead of 5.
|
|
|
|
Post by bhanvadia on Feb 4, 2023 5:02:49 GMT
Does not work together in MY2022 and above cars with MIB3.
|
|
|
|
Post by phildon777 on Feb 4, 2023 14:59:08 GMT
What does not work together on MY2022 and above? Steering and Braking for MA or Trailer Assist + Rear Axle Steering?
|
|
|
|
Post by bhanvadia on Feb 6, 2023 8:08:38 GMT
Steering and braking together for MA.
|
|
|
|
Post by hakenalba on May 24, 2023 6:43:16 GMT
Hello,
can someone paste a link with files for flashing A5 module, from 4KE907107AC to 4KE907107AR (A6 C8), please.
Thank you.
Br
|
|
|
|
Post by robin1 on May 24, 2023 7:30:21 GMT
|
|
|
|
Post by 6aidua on May 26, 2023 23:37:09 GMT
Hello, I have a 2016 with AM (293), here I update to AR (295) and the braking did not work. I bought a new 4K4907117H with 377, coded, parameterized and calibrated and everything works 100% according to the coding given here:) I hold the AI button and it lights up green and the crane works with braking and everything:) All home work options option! lidar, 12sensors, seat assist, thermal vision, head up, DAB (needs swap), 360° vision, TV, CD, 4x radar, matrix hd, music, electric damping, door assist,side assist, disk protections don't work but it doesn't matter...
disadvantage:
However, I'm not allowed to service Audi, just code according to the vin, and the job is fatal error...
|
|
|
|
Post by robin1 on May 31, 2023 15:06:27 GMT
|
|
|
|
Post by jsmills on Jun 6, 2023 15:16:06 GMT
Hello guys. I managed to Code maneuver assist on my 2020 etron. But after an error which I couldn’t erase (also maneuver assist) I went to Audi. And they coded it to stock. Before I was at Audi maneuver assist worked and also stoped but itself. After being at Audi I coded it again. It also shows it in mmi but don’t stop. Audi only change bcm ecu in warranty. Does someone know why it worked before ? ( they also updated a5 ecu from 0295 to 0365) I’ve managed to get the MA coded in my Etron, it steers but doesn’t brake. I couldn’t do the ABS settings as it won’t accept them even coding both at the same time. How did you code your abs unit? I think it’s different to the Q8/A6 units as it’s brake by wire. I don’t have any errors as yet. |
|
pitty
New Member
Posts: 47
|
Post by pitty on Jun 9, 2023 14:19:50 GMT
Nice work! Can confirm this is working on the Q8 as well (I tested with a cardboard box too). Would LOVE to get Park Assist per this thread (https://forum.obdeleven.com/thread/7185/enable-parking-assist) working too, I feel as if these two features are closely related. Also wonder how closely related "trailer maneuver assist" is (https://www.youtube.com/watch?v=Mus_NWN0vTM) Very nice work. Very well done 👍 |
|
|
|
Post by robin1 on Jun 12, 2023 18:42:33 GMT
I was able to upgrade zFAS to version 295.
Now everything works as it should.
|
|
|
|
Post by hakenalba on Aug 1, 2023 14:46:11 GMT
Did anyone already try to flash zFAS to version 0295 with these files ?
|
|
|
|
Post by gsaxtc on Aug 31, 2023 20:34:26 GMT
Did anyone already try to flash zFAS to version 0295 with these files ?
I updated. Everything work. Ipa/maneuver assist with stop.. But got problem with 360 camera. Side camera have rotated image on 180 degree  |
|
|
|
Post by kamil11114 on Sept 19, 2023 13:24:01 GMT
I found some more coding, hopefully it will enable braking and steering together on newer FW, haven't test it yet...
It's translated to English, but original text is in Deutsch, added it in the end of the post.
Maneuvering Assist - Activation/Activation
STG 09 > adjust > "manoeuvring brake function" channel, set > value to "activated"
STG 03 > Coding > ...
> Activate byte 10 > bit 0> Activate byte 24 > bit 7
STG 44 > Activate encoding > byte 02 > bit 1 ("Maneuver Assistant,0=not active / 1=active")
STG A5 > Coding > ...
> Activate byte 44 > bit 5 ("MA_steering,active")> Activate byte 44 > bit 6 ("MA_breaking,active")> Activate byte 44 > bit 7 ("MA_Maneuver_assist,installed")
STG 19 > Activate the installation list > "10 - Parking Aid"
STG 5F > adaptation > ...
> channel "Car_Function_Adaptations_Gen2-menu_display_pdc_over_threshold_high" set > value to "activated> set channel "Car_Function_List_BAP_Gen2-VPS_0x0B_msg_bus" > value to "terminal 15"> set channel "Car_Function_List_CAN_Gen2-PDC_audio_lowering" > value to "available> set channel "Car_Function_List_CAN_Gen2-PDC_audio_lowering_msg_bus" > value to "terminal 15"
Manövrierassistent - Aktivierung/Freischaltung
STG 09 > Anpassung > Kanal "Rangierbremsfunktion" > Wert auf "aktiviert" setzen
STG 03 > Codierung > …
> Byte 10 > Bit 0 aktivieren > Byte 24 > Bit 7 aktivieren
STG 44 > Codierung > Byte 02 > Bit 1 aktivieren ("Manövrierassistent,0=nicht aktiv / 1=aktiv")
STG A5 > Codierung > …
> Byte 44 > Bit 5 aktivieren ("MA_steering,active") > Byte 44 > Bit 6 aktivieren ("MA_breaking,active") > Byte 44 > Bit 7 aktivieren ("MA_Maneuver_assist,installed")
STG 19 > Verbauliste > "10 - Einparkhilfe" aktivieren
STG 5F > Anpassung > …
> Kanal "Car_Function_Adaptations_Gen2-menu_display_pdc_over_threshold_high" > Wert auf "aktiviert" setzen > Kanal "Car_Function_List_BAP_Gen2-VPS_0x0B_msg_bus" > Wert auf "Klemme 15" setzen > Kanal "Car_Function_List_CAN_Gen2-PDC_audio_lowering" > Wert auf "verfügbar" setzen > Kanal "Car_Function_List_CAN_Gen2-PDC_audio_lowering_msg_bus" > Wert auf "Klemme 15" setzen
|
|
|
|
Post by safesantos on Sept 26, 2023 6:52:01 GMT
Did anyone already try to flash zFAS to version 0295 with these files ?
I updated. Everything work. Ipa/maneuver assist with stop.. But got problem with 360 camera. Side camera have rotated image on 180 degree Hello, How did you flash the .frf ? I tried with ODIS-E and passthru, flash will always crash after around 2h, I've tried everything I can't find a solution. I tried VCP original but it won't even open the .frf. Going from AC to AR. Could you help please ? EDIT : Had to use a DoIP ODIS-E compatible tool for flashing. Flashed in 49minutes. |
|
|
|
Post by loeans on Jan 6, 2024 23:53:19 GMT
You need a professional charger min 100 er power supply, don't waste your time with odis-e because you need to connect svm server via odis online after updated the zfas and you will get error and you cannot parameterize because odis server didn't now anything about your newly update, use geko and odis online with a 100 er charger
|
|
|
|
Post by audimanfinland on Feb 13, 2024 14:44:43 GMT
Hi to all.
I have used Kufatec Maneuvering Assistant coding dongle 48279 Codierdongle Manöverassist MLB evo.
DO NOT BUY KUFATEC DONGLE AT THE MOMENT!
There is major problem with Kufatec and e tron. Been mailing with them now a couple of weeks.
I have zFAS 364 and there is some problem at Dashboard Control Module Incorrect Coded Fault Code U101400 Static
On their website was text BEFORE THEY UPDATED IT At least ->0295, but not correct info for e tron ge.
This can be done at local Audi dealer/workshop, but not easy like you know, or is it?
Address A5 it is and 0365 MAYBE, it is not sure to work.
Some forums says that e tron MIB3 has component protection system?
____Only suitable for vehicles with area view (PR No.: KA6), park distance control (PR No.: 9X0) and ACC (PR No.: 8T3,8T4,8T5,8T8)
Only suitable for vehicles with zFAS software version from 0295 (e-tzron Ge from 0365), please read out the address A5 via diagnosis
With the e-tron GE, any necessary zFAS update must be carried out by Audi Service
*Currently, retrofitting vehicles from Productiondate 14.08.2023 is not possible
**Currently, retrofitting vehicles from model year 2024 is not possible____
|
|
