denbal
Junior Member
Posts: 61
|
Post by denbal on Sept 24, 2020 18:42:04 GMT
Exactly how can they be flashed ?
Or where can this be done ?
I have a -AC module
|
|
|
|
Post by OBDeleven on Sept 24, 2020 19:00:32 GMT
You can flash it with odis engineering, software is available at erwin, but after flashing paramerizations must be performed and this require online access.
|
|
|
|
Post by whishp (banned) on Sept 24, 2020 20:55:31 GMT
Any chance that it will work in future updates? And only problem with 4KE907107AC? I know that it working on 4KE907107AM too.
|
|
|
|
Post by OBDeleven on Sept 25, 2020 4:31:24 GMT
It can be that AM also suitable, I just find out that AR is latest so I updated to AR.
|
|
|
|
Post by whishp (banned) on Sept 25, 2020 6:42:01 GMT
Audi service must update on maintenance service?
|
|
|
|
Post by sarah1331 on Sept 25, 2020 6:42:56 GMT
No only on recall ie if a fault has been identified and repaired with update
|
|
|
|
Post by whishp (banned) on Sept 25, 2020 6:59:30 GMT
can I go to the dealer and ask them to update it?
|
|
|
|
Post by sarah1331 on Sept 25, 2020 7:34:19 GMT
You can ask but it’s doubtful they will you need a good dealer that knows what he or she is on about
You can buy a VAS or j2534-2 and do it yourself
|
|
|
|
Post by andreask on Oct 18, 2020 9:53:04 GMT
You can ask but it’s doubtful they will you need a good dealer that knows what he or she is on about You can buy a VAS or j2534-2 and do it yourself Will I be able to perform all including Parameterization with VAS.? |
|
wgow
New Member
Posts: 10
|
Post by wgow on Nov 7, 2020 16:37:45 GMT
It can be that AM also suitable, I just find out that AR is latest so I updated to AR. If I ask the dealer to update it, will it be done? I am also the ac version Do I just need to update the software?? |
|
wgow
New Member
Posts: 10
|
Post by wgow on Nov 7, 2020 16:40:26 GMT
You can ask but it’s doubtful they will you need a good dealer that knows what he or she is on about You can buy a VAS or j2534-2 and do it yourself Can't you do it with obd eleven?? If you use it as vas What should I do?? |
|
|
|
Post by sarah1331 on Nov 7, 2020 16:49:53 GMT
Cannot be updated with OBDELEVEN
|
|
|
|
Post by ash187 on Nov 16, 2020 18:59:36 GMT
You can flash it with odis engineering, software is available at erwin, but after flashing paramerizations must be performed and this require online access. Where did you find the software on erwin? i have full access and online access but I cannot find the ODIS E software. I also have the AC and want to update to AR. VCP also has the parameter files... its just the update I cannot do. |
|
|
|
Post by whishper on Nov 18, 2020 9:33:45 GMT
We need calibrate camera after update and parameters?
|
|
wgow
New Member
Posts: 10
|
Post by wgow on Nov 26, 2020 8:18:04 GMT
You can ask but it’s doubtful they will you need a good dealer that knows what he or she is on about You can buy a VAS or j2534-2 and do it yourself Please tell me how to do vas And how should I ask the dealer? Korean dealers do not have an updated version. Just say like this. Can i not? |
|
|
|
Post by loik91 on Dec 22, 2020 23:08:44 GMT
hey
only ODIS-E +vas 5054/6154 and no camera calibrating
you will need SVM code to be legacy (ask if needed PM)
good luck!!!
|
|
mb3
New Member
Posts: 1
|
Post by mb3 on Jan 17, 2021 13:18:11 GMT
I finally got the Trailer Assist to work.
I am going to list all of the coding below, so that someone in the future will have it all in one place. Please note that I am using the OBDeleven Next Gen Pro on a 2020 Q8 Prestige with rear wheel steering. The coding may differ on other years or models.
Please note that the Trailer Assist icon will not "light up" on your MMI unless you have the vehicle attached to a trailer, the wires plugged in, all of your trailer lights are functioning properly, and your rear liftgate is closed.
Please also note that in order for the Trailer Assist to work, you must also have the Maneuvering Assist coded properly. It does not matter which one you code first. Here are the steps:
Maneuvering Assist:
09 Central Electrics > adaptation > maneuvering assistant > activated
44 Steering Assistance > long coding > byte 2, bit 1 (active)
A5 Driver Assistance > long coding > byte 44 > bit 5 (MA Steering Active)
A5 Driver Assistance > long coding > byte 44 > bit 6 (MA Braking Active)
A5 Driver Assistance > long coding > byte 44 > bit 7 (MA Maneuver assist installed)
19 Gateway > adaptation > installation list > parking assistance > coded
Important note: Make sure to code and swipe the installation button at the same time for the following two steps since they apply to left and right brakes and must be coded the same:
03 Brakes > long coding > byte 10 > bit 0 > active
03 Brakes > long coding > byte 24 > bit 7 > active
Trailer Assist:
44 Steering Assistance > long coding > byte 1, bit 2 (trailer maneuver assist active)
46 Comfort System > long coding > byte 4 > bit 7 (trailer monitoring)
09 Central Electrics > long coding > byte 28 > bit 7 (ARA installed)
A5 Driver Assistance > long coding > byte 15, bit 4 (FW ARA BCM installed)
A5 Driver Assistance > long coding > byte 54 > bit 6 (TMA trailer maneuver assist installed)
A5 Driver Assistance > long coding > byte 54 > bit 7 (TMA trailer maneuver assist image processing installed)
5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant > activated
5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant over threshold high > activated
5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant 0x36 > activated
5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant msg bus 0x36 > terminal 15
IF YOU HAVE REAR WHEEL STEERING YOU NEED TO PERFORM THE FOLLOWING ADDITIONAL STEP:
09 Central Electrics > long coding > rear axle steering > Hal not available
Regarding the rear wheel steering setting, I intend to turn this to "not available" when trailering and to "available" when not trailering.
I hope this helps someone in the future. Thank you everyone for your patience.
|
|
|
|
Post by nu11set on Jan 23, 2021 16:20:29 GMT
Hello, i cant find this adaptation:
Maneuvering Assist:
09 Central Electrics > adaptation > maneuvering assistant > activated
have only Maneuvering brake function
other adaptation and long coding have in app. how activated this point ?
|
|
|
|
Post by amphetamine on Feb 14, 2021 6:40:26 GMT
|
|
|
|
Post by riotburn on Mar 5, 2021 20:32:29 GMT
I get marginal conditions not met trying to set 44 byte 2 bit 1 to active in OBDeleven. I also don't see 19 adaptation parking assistance. Anyone else have this issue? I tried with hood open, engine on.
|
|
|
|
Post by riotburn on Mar 5, 2021 21:12:20 GMT
|
|
|
|
Post by davedavez on Mar 5, 2021 21:17:41 GMT
Is your hood open?
|
|
|
|
Post by riotburn on Mar 5, 2021 22:22:47 GMT
I tried again with hood closed and engine off and it worked. Also I reread and noticed the 19 adaptation is Installed and set that. Now I was able to turn on maneuver assist from the menu but when I get the cameras open the maneuver button is crossed out. |
|
|
|
Post by riotburn on Mar 6, 2021 0:47:11 GMT
Nevermind I went for a drive and it wasn't crossed out. I guess it's not available in certain situations.
|
|
|
|
Post by beogradjanin on Mar 10, 2021 19:41:46 GMT
riotburnIn address 44 you are not allowed to turn your engine on. Just the ignition!!!
|
|
|
|
Post by cuturilod on Apr 13, 2021 16:01:19 GMT
hey only ODIS-E +vas 5054/6154 and no camera calibrating you will need SVM code to be legacy (ask if needed PM) good luck!!! Hi. Is posible to flash modul with VCP? |
|
|
|
Post by zeta127 on Apr 17, 2021 10:12:39 GMT
Below is my complete coding including the 03 module. STG 09 > Adaptation: MAS12843-Maneuvering brake function,activated ,1 STG 44 > coding > Byte 02 > Bit 1 auf "Maneuvering assistant,0=not active / 1=active" STG A5 > Coding > Byte 44 > Bit 5 auf "MA_sterring,active" STG A5 > Coding > Byte 44 > Bit 6 auf "MA_breaking,active" STG A5 > Coding > Byte 44 > Bit 7 auf "MA_maneuver_assist,installed" STG 19 > Parking assist > coded STG 03 > Coding > Byte 10 - Bit 0 - Activate STG 03 > Coding > Byte 24 - Bit 7 - Activate Today I did the coding on my A6 2021 machine, an item on the menu appeared but my indication is different.  |
|
|
|
Post by andreask on Apr 20, 2021 3:36:40 GMT
I finally got the Trailer Assist to work. I am going to list all of the coding below, so that someone in the future will have it all in one place. Please note that I am using the OBDeleven Next Gen Pro on a 2020 Q8 Prestige with rear wheel steering. The coding may differ on other years or models. Please note that the Trailer Assist icon will not "light up" on your MMI unless you have the vehicle attached to a trailer, the wires plugged in, all of your trailer lights are functioning properly, and your rear liftgate is closed. Please also note that in order for the Trailer Assist to work, you must also have the Maneuvering Assist coded properly. It does not matter which one you code first. Here are the steps: Maneuvering Assist: 09 Central Electrics > adaptation > maneuvering assistant > activated 44 Steering Assistance > long coding > byte 2, bit 1 (active) A5 Driver Assistance > long coding > byte 44 > bit 5 (MA Steering Active) A5 Driver Assistance > long coding > byte 44 > bit 6 (MA Braking Active) A5 Driver Assistance > long coding > byte 44 > bit 7 (MA Maneuver assist installed) 19 Gateway > adaptation > installation list > parking assistance > coded Important note: Make sure to code and swipe the installation button at the same time for the following two steps since they apply to left and right brakes and must be coded the same: 03 Brakes > long coding > byte 10 > bit 0 > active 03 Brakes > long coding > byte 24 > bit 7 > active Trailer Assist: 44 Steering Assistance > long coding > byte 1, bit 2 (trailer maneuver assist active) 46 Comfort System > long coding > byte 4 > bit 7 (trailer monitoring) 09 Central Electrics > long coding > byte 28 > bit 7 (ARA installed) A5 Driver Assistance > long coding > byte 15, bit 4 (FW ARA BCM installed) A5 Driver Assistance > long coding > byte 54 > bit 6 (TMA trailer maneuver assist installed) A5 Driver Assistance > long coding > byte 54 > bit 7 (TMA trailer maneuver assist image processing installed) 5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant > activated 5F Multimedia > Adaptation > Car Function Adaptations Gen 2 > menu display trailer assistant over threshold high > activated 5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant 0x36 > activated 5F Multimedia > Adaptation > Car Function List BAP Gen 2 > trailer assistant msg bus 0x36 > terminal 15 IF YOU HAVE REAR WHEEL STEERING YOU NEED TO PERFORM THE FOLLOWING ADDITIONAL STEP: 09 Central Electrics > long coding > rear axle steering > Hal not available Regarding the rear wheel steering setting, I intend to turn this to "not available" when trailering and to "available" when not trailering. I hope this helps someone in the future. Thank you everyone for your patience. Hi guys! I just changed to an e-Tron 55 and wonder if someone managed to code Maneouver assist on an e-Tron..? As for the Q8 - I managed to code Maneouver assist on my Q8, after first updating the zFas (A5 driver assistance module) at the dealer (was 0291 version). This was a breeze since There is a TPI instruction at Audi to update the older 0291 versions due to intermittent faults experienced by customers on I.e. lane assist / lights / and pre-sense functions. Just mention that you have seen this occuring a few times and the dealer will help by updating to 0295 or later version. |
|
|
|
Post by underlead on May 3, 2021 7:48:00 GMT
hey only ODIS-E +vas 5054/6154 and no camera calibrating you will need SVM code to be legacy (ask if needed PM) good luck!!! loik91, do you have additional info regarding flash procedure? (Sorry but I cannot write you in PM) |
|
|
|
Post by fatjon on May 4, 2021 7:27:07 GMT
AndreasK, do have the TPI number for the update from 291 to 295? My dealer say they know nothing about it.
thanks
|
|
