otam
New Member
Posts: 8
|
Post by otam on Jan 25, 2020 18:02:35 GMT
Confirmed e-tron OBDeleven tweaks. These are OBDeleven tweaks I have tested and confirmed on my 2019 e-tron. - The list structure is set up similar to how OBDeleven writes log files. - The list is sorted by controller ID number. Kind request: - If others have similar confirmed e-tron tweaks, please use this list as a base and append to it. - This way we can build a growing complete list of confirmed tweaks without having to search for single tweaks in long forum threads. - Rather than commenting errors/misspelling/notion, feel free to publish av new corrected list.
DELAY AUTOMATIC TURN ON LOW BEAM LIGHTS - Original settings will wait until 200 lux before automatic turn on low beam in the evening (dawn), - and turn off at 500 lux in the morning (dusk) - After tweak it will wait until 100 lux before automatic turn on low beam in the evening (dawn), - and turn off at 200 lux in the morning (dusk) Adaptation Control unit: 09 Central Electrics Name: RLS_Night_Sensitivity Values: p_lx_rs_day: Old value: 500 New value: 200 p_lx_rs_dawn: Old value: 200 New value: 100
ENABLE VIRTUAL COCKPIT MENU LAP-TIMER - After tweak, click the steering wheel menu button to see several new "Lap Timer" entries. Long coding Control unit: 17 Dash Board Values: Lap counter: Old value: No New value: Yes
ENABLE VIRTUAL COCKPIT MENU "SPORT" WITH G-METER - After tweak, click the steering wheel menu button to find a new "Sport" entry in the Virtual Cockpit functions list Long coding Control unit: 17 Dash Board Values: Acceleration display: Old value: No New value: Yes
LONG PRESS LOCKBUTTON TO FOLD POWER MIRRORS - For e-tron with power mirrors. - After tweak, long press close on remote folds power mirrors. Long coding Control unit: 46 Central Module Comfort System Values: mirror_retraction_at_comfort_close: Old value: not active New value: active
DISABLE AUTOMATIC KICK-TO-OPEN REAR LID - For e-tron with foot gesture under rear bumper to open/close rear lid. - After tweak, automatic opening and closing rear lid is disabled - Might be useful if you have "nervous" sensors thet opens and closes when you dont want it to. Adaptation Control unit: 46 Central Module Comfort System Name: Personalization settings vehicle Values: Rear lid unlocking through rear lid opening sensors: Old value: On New value: Off
ENABLE OFFROAD MENU IN MMI - Requires MMI reset after programming: push volume button down for more than 10sec. - After tweak, from the range-mode menu, swipe to left for new offroad menu. - An e-tron 2019 did not display roll/pitch values in offroad menu, - maybe e-tron might use a different msg_bus than "Comfort data bus" for roll/pitch values. Adaptation Control unit: 5F Information Control Unit Name: Car_Function_Adaptations_Gen2 Values: menu_display_compass: Old value: Not activated New value: activated menu_display_compass_over_threhold_high: Old value: Not activated New value: activated menu_display_angle_of_slope: Old value: Not activated New value: activated menu_display_angle_of_slope_over_threshold_high: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 Values: compass_0x15: Old value: Not activated New value: activated compass_0x15_msg_bus: Old value: Not activated New value: Comfort data bus angle_of_slope_0x24: Old value: Not activated New value: activated angle_of_slope_0x24_msg_bus: Old value: Not activated New value: Comfort data bus
ENABLE WIRELESS CARPLAY AND ANDROID AUTO - For e-tron with Carplay only on wired connection. - After tweak, to use Carplay on wireless, you must connect phone to both Bluetooth and the new appearing Audi 5GHz WLAN. Adaptation Control unit: 5F Information Control Unit Name: Vehicle configuration Values: Google_GAL_Wireless: Old value: Off New value: On wlan_5ghz_switch: Old value: Not activated New value: activated Apple_DIO_Wireless: Old value: Off New value: On
USE 360 CAMERA IN PARK ASSIST VIEW - For e-tron with 360 camera - After tweak, seems to use 360 camera in the Park Assist view. Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Visual display for park assist Values: ---: Old value: OPS display New value: with OPS 360°
USE ROAD SIGNS ONLY FOR CURRENT ROAD SPEED LIMIT - For e-tron with road sign camera detection. - The car default evaluates the speed limit by a "fusion" of map data and observed road signs. - It seems like it uses the map data as a basis and overrides this with camera observed road signs. - This would make the road sign info preferred over map data, as it should be (example: temporary road work signs) - The alternative value "Road sign detection" makes the system disgard map speed data and use "road sign only". - This might seem like a good idea in case of poor map data quality. - PS: One user found the alternative "road sign only" error rate even worse then the default "fusion" mode. Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Road sign detection fusion mode Values: --- ---: Old value: Road sign detection New value: Road sign fusion
|
|
obe
New Member
Posts: 4
|
Post by obe on Feb 17, 2020 17:00:18 GMT
I have etron from north america when the radio channels are jumping in odd number, for example in FM channel from 95.5 to 95.7. is it possible to set the radio to have europien concept? by tweaks?
|
|
|
Post by getitworking on Mar 31, 2020 21:50:43 GMT
Does somebody know or there are more tweaks for Etron? I would like to activate amazon Alexa and Blind Spot Assist for my virtuele mirrors.
|
|
obe
New Member
Posts: 4
|
Post by obe on May 15, 2020 6:40:37 GMT
Hi. I tried the new apps in OBD, in all, the request to have hood open and engine in on. I done both but still the application asking to turn on the engine, any explenation from you?
|
|
|
Post by shera77 on May 16, 2020 11:28:32 GMT
Dear otam,
I wanted to try according to your instructions to change the automatic light on in block 09, but it requires a login number for me. Please tell me which login number to specify? Maybe there is a whole list of logins for all Audi e-tron blocks?
Thanks in advance
|
|
|
Post by shera77 on May 16, 2020 11:35:43 GMT
Hi ОБЕ,
I confirm that I get the same message if I want to do some operation in the "Apps" section (where you need to use bonuses).
And it doesn’t work out, it constantly gives out "Make sure the ignition is on"
I pressed the start button with the brake and without the brake, opened the hood - everything is useless.
|
|
maxas
New Member
Posts: 2
|
Post by maxas on May 16, 2020 22:28:03 GMT
Hi otam,
thanks a lot for your coding. Most of it works for me. However, the offroad menu is missing the display of the tilt degree. It stays at 0° for the car, do yu know what to add to the coding?
Thanks in advance!
|
|
maxas
New Member
Posts: 2
|
Post by maxas on May 16, 2020 22:29:59 GMT
You can activate Alexa without OBD, just using an account and the myaudi app. Keep in mind to login your account also at your etron that it works. and then ask "Alexa" while pressing the voice button at your steering wheel
|
|
nm74
Closed beta tester
Posts: 7
|
Post by nm74 on May 19, 2020 11:44:01 GMT
maxas not working for country Switzerland - is there a workaround to simulate another country like Germany?
|
|
|
Post by bostjanlaba on May 31, 2020 7:46:53 GMT
Hi ОБЕ, I confirm that I get the same message if I want to do some operation in the "Apps" section (where you need to use bonuses). And it doesn’t work out, it constantly gives out "Make sure the ignition is on" I pressed the start button with the brake and without the brake, opened the hood - everything is useless. I agree. App keeps saying I need to check if ignition is on. Things don't work ![:(](//storage.proboards.com/forum/images/smiley/sad.png)
|
|
tonk
New Member
Posts: 8
|
Post by tonk on Jul 17, 2020 21:04:51 GMT
ENABLE CAMERA PARKING ASSIST AT SPEEDS > 30 KM/H - Normally the camera / parking assist switches off when the speed of the car exceeds 30 km/h (not at 150 km/h as stated below?). After tweak this stays on, so you could use it eg as a blind spot camera or otherwise. Adaptation Control unit: A5 Driver Assistance Name: Switch-off speed for parking assist Old value: 150 New value: 140
|
|
tonk
New Member
Posts: 8
|
Post by tonk on Jul 17, 2020 21:09:15 GMT
E-Tron 2019 Android 10
Hello Otam, others,
Tweak for Wireless Android Auto doesn't seem to work for me?? Did someone had success with this (not for Apple carply, but for Android Auto) ?
Thanks for all, and keep up the good work !
|
|
otam
New Member
Posts: 8
|
Post by otam on Jul 28, 2020 18:39:02 GMT
E-TRON OBDELEVEN TWEAKS - Revised and updated OBDeleven tweaks for e-tron - Confirmed on my 2019 european spec e-tron 55. - Coding done with car started without pushing brake pedal, handbrake on, seatbelt on, bonnet released but not raised.
ENABLE VIRTUAL COCKPIT SPORT MENU LAP-TIMER - In Virtual Cocpit, Vehicle Fuctions menu, steering wheel menu button will show additional entries for "Sport" and "Lap Timer". Long coding Control unit: 17 Dash Board Values: Lap counter: Old value: No New value: Yes Acceleration display: Old value: No New value: Yes Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart
LONG PRESS LOCK BUTTON ON REMOTE TO FOLD POWER MIRRORS - For e-tron with power mirrors - Long press close on remote folds power mirrors Long coding Control unit: 46 Central Module Comfort System Values: mirror_retraction_at_comfort_close: Old value: not active New value: active
DISABLE SENSOR CONTROLLED REAR LID OPENING/CLOSING - For e-tron with foot gesture under rear bumper to open/close rear lid. - Disables foot gesture opening and closing rear lid - Might be useful if you have "nervous" sensors thet opens and closes when you dont want it to Adaptation Control unit: 46 Central Module Comfort System Name: Production mode Values: Deactivate sensor-controlled rear lid opening: Old value: not active New value: On
ENABLE OFFROAD MENU IN MMI - Requires MMI reset after programming: push volume button down for more than 10sec. - After tweak, from the range-mode menu, swipe to left for new offroad menu. - 2019 e-tron did not display roll/pitch values in offroad menu, might be that e-tron uses a different msg_bus than "Comfort data bus" for roll/pitch values. Adaptation Control unit: 5F Information Control Unit Name: Car_Function_Adaptations_Gen2 Values: menu_display_compass: Old value: Not activated New value: activated menu_display_compass_over_threhold_high: Old value: Not activated New value: activated menu_display_angle_of_slope: Old value: Not activated New value: activated menu_display_angle_of_slope_over_threshold_high: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 Values: compass_0x15: Old value: Not activated New value: activated compass_0x15_msg_bus: Old value: Not activated New value: Comfort data bus angle_of_slope_0x24: Old value: Not activated New value: activated angle_of_slope_0x24_msg_bus: Old value: Not activated New value: Comfort data bus Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart.
ENABLE WIRELESS APPLE CARPLAY - European 2019 e-trons had the 5GHz WLAN disabled, which made Carplay work only on wired connection. - To use wireless Carplay wireless after mod, phone must connect to both Bluetooth and the new appearing Audi 5GHz WLAN. Adaptation Control unit: 5F Information Control Unit Name: Vehicle configuration Values: wlan_5ghz_switch: Old value: Not activated New value: Activated Apple_DIO_Wireless: Old value: Off New value: On
ROAD SIGN DETECTION WITH CAMERA ONLY - For e-tron with road sign camera detection. - The car default evaluates the speed limit by a "fusion" of map data and front camera observed road signs. - It seems like it uses the map data as a basis and overrides this with camera observed road signs. - This would make the road sign info preferred over map data, as it should be (example: temporary road work signs) - The alternative value "Road sign detection" makes the system disgard map data and use camera only. - This might seem like a good idea in case of poor map data quality, but might be even worse with camera only. Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Road sign detection fusion mode Values: ---: Old value: Road sign detection New value: Road sign fusion
DISABLE REAR LID OPENING WITH REMOTE KEY - Disable opening of rear lid when double clicking the middle button on the remote key - Alternatively set the value to "0.40 s" to keep the function, but only with rapid double click. Adaptation Control unit: 46 Central Module Comfort System Name: Heckklappe öffnen durch Doppelbetätigung der Funkfernbedienung Value: Time window for double-actuation Old value: 1.40 s New value: 0 s
PARKING ASSIST CAMERA AT SPEED > 30 KM/H - Normally the parking assist camera switches off when the speed of the car exceeds 30 km/h (not at 150 km/h as stated below?). - After tweak this stays on, so you could use it eg as a blind spot camera or otherwise. Adaptation Control unit: A5 Driver Assistance Name: Switch-off speed for parking assist Old value: 150 New value: 140
TRAILER MANOUVER ASSIST - Verified on e-tron with 360 camera and factory trailer hitch - Finger touch control on lower MMI display to control trailer angle when reversing - Car handles steering wheel automatically according to touch input - Creates new meny icon on top of lower display (grayed out until trailer connector is attached) - Verified on e-tron with 360 camera and factory trailer hitch Long coding: Control unit: 09 Central Electrics Name: ARA Old value: Not installed New value: Installed Long coding: Control unit: 44 Steering Assistance Name: Trailer manouver assist Old value: Not active New value: Active Long coding: Control unit: 46 Comfort System Name: Trailer monitoring Old value: Not active New value: Active Long coding: Control unit: A5 Driver Assistance Name: FW_ARA_BCM Old value: Not installed New value: Installed Name: TMA_Trailer_manouver_assist Old value: Not installed New value: Installed Name: TMA_Trailer_manouver_assist_image_processing Old value: Not installed New value: Installed Adaptation Control unit: 5F Multimedia Name: Car_Function_Adaptations_Gen2 Values: menu_display_trailer_assistant: Old value: Not activated New value: Activated menu_display_trailer_assistant_over_threshold_high: Old value: Not activated New value: Activated Name: Car_Function_List_BAP_Gen2 Values: Trailer_Assistant_0x36: Old value: Not activated New value: Activated Trailer_Assistant_msg_bus_0x36: Old value: none New value: Terminal 15 Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart.
|
|
|
Post by chris2k on Jul 29, 2020 15:58:00 GMT
Thanks a lot for sharing your updated tweaks otam. Hopefully we can see more activity and tweaks in this forum in the future.
I would love to see a fix for the lane assist issue and possibly enabling Virtual Cockpit+ and Matrix LED.
|
|
|
Post by harnejac on Aug 2, 2020 21:27:26 GMT
New with obdeleven and on this forum, so i hope im excused silly questions.. 😂 But.. are interested in wireless CarPlay Among other on my 2019 etron, and cannot find the Control unit: 5F Information Controle unit in Adaption??
|
|
|
Post by dv52 (Australia) on Aug 3, 2020 4:23:20 GMT
^^^ harnejac: hmm... yes it is confusing!! First you need to understand the order; there are discrete control modules/units in the car that have individual identifiers (names) and individual addresses (in hexadecimal numbering - unfortunately not in decimal). Most of these discrete control modules/units have their own bunch of adaptation channels as well as their own long-code sting.
So- the order of finding stuff with OBD11 is to first select the control module/unit, then select the category of the thing that you are trying to change (i.e. Adaptation, or Long-code)
You are trying to find Information Control unit -as the name implies, this is a module/unit, it's not an "Adaptation" channel. This module lives @ address 5F. So to find this module/unit scroll down the Control Units screen (which lists all of of installed modules in the car) until you see "5F" in a circle - like this
Once you have selected the 5F module/unit, you will be presented with a screen that then allows you to select Adaptation channels within this module/unit
Don
|
|
|
Post by harnejac on Aug 3, 2020 15:12:02 GMT
Well..im scrollig, and This modul 5F dont really exist. Im ising iPhone, wondering if this can be the reason? In the iphone it is no search button...
|
|
larse
New Member
Posts: 1
|
Post by larse on Aug 4, 2020 9:47:10 GMT
ROAD SIGN DETECTION WITH CAMERA ONLY - For e-tron with road sign camera detection. - The car default evaluates the speed limit by a "fusion" of map data and front camera observed road signs. - It seems like it uses the map data as a basis and overrides this with camera observed road signs. - This would make the road sign info preferred over map data, as it should be (example: temporary road work signs) - The alternative value "Road sign detection" makes the system disgard map data and use camera only. - This might seem like a good idea in case of poor map data quality, but might be even worse with camera only.Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Road sign detection fusion mode Values: ---: Old value: Road sign detection New value: Road sign fusion I have quite a few roads around here where the map data is outdated compared to the signs. This change works perfectly fine, but the car always throws an error when it first sees the first sign it seems like. I'm not totally sure what the english translation would be, but it says something like the "Road sign detection is not working properly at the moment". So there seems like there are other parts that might need some coding too, or if there is a way to remove this error message.
|
|
|
Post by harnejac on Aug 23, 2020 10:47:09 GMT
Thanks a lot for sharing your updated tweaks otam. Hopefully we can see more activity and tweaks in this forum in the future. I would love to see a fix for the lane assist issue and possibly enabling Virtual Cockpit+ and Matrix LED. Why is This not possible you think? "There are no item available for this option" When i enter Roadsign fusjon detection mode.
|
|
|
Post by calbear92 on Oct 1, 2020 5:55:44 GMT
Aloha,
my 2019 eTron Premium Plus had no issues communicating with my OBD Eleven on iOS.
However, I just acquired a 2019 eTron Prestige and I have several problems noted in another post here. The biggest one is inability to connect to Driver Assistance module A5. Evidently, another US Prestige owner is also reporting the same issue. Not sure if it's all US Prestige models that have this issue.
If anyone knows, that would be a good thing to know for all US Prestige owners.
|
|
|
Post by Philmoeslim on Oct 7, 2020 16:08:37 GMT
Yes it does exist it is just lower down in the list than you would think. It goes through all the numbers before it starts doing number then letter
|
|
|
Post by jimmy9980 on Oct 23, 2020 16:39:09 GMT
This works now after the last app update the other day I was able to preform coding. on the A5 Driving Asst. Module.
"""""Aloha,
my 2019 eTron Premium Plus had no issues communicating with my OBD Eleven on iOS.
However, I just acquired a 2019 eTron Prestige and I have several problems noted in another post here. The biggest one is inability to connect to Driver Assistance module A5. Evidently, another US Prestige owner is also reporting the same issue. Not sure if it's all US Prestige models that have this issue.
If anyone knows, that would be a good thing to know for all US Prestige owners.""""""""""
|
|
|
Post by polyphonic on Dec 4, 2020 23:46:23 GMT
ENABLE CAMERA PARKING ASSIST AT SPEEDS > 30 KM/H
- Normally the camera / parking assist switches off when the speed of the car exceeds 30 km/h (not at 150 km/h as stated below?). After tweak this stays on, so you could use it eg as a blind spot camera or otherwise.
Adaptation Control unit: A5 Driver Assistance Name: Switch-off speed for parking assist Old value: 150 New value: 140 Just to confirm, does this allow you turn turn the camera on at any speed? I normally have to bring the car to a crawl before entering a driveway and being able to enable the camera at 10+ mph would be ideal. Sounds from the post that it only stops it from turning off above 30 km.
|
|
nm74
Closed beta tester
Posts: 7
|
Post by nm74 on Dec 6, 2020 13:20:38 GMT
Yes, it works for MY19 till 21 so far. At any speed you can turn it on and view even the car with 3D
|
|
|
Post by mrtron on Dec 22, 2020 18:11:33 GMT
No, does not work for my 2020
|
|
|
Post by struijs on Jan 2, 2021 15:45:20 GMT
G-Meter does not work with my 2021 E-Tron.
Eleven says its on, but can't find it.
Where to look?
Peter
|
|
nm74
Closed beta tester
Posts: 7
|
Post by nm74 on Jan 5, 2021 16:15:19 GMT
After activating press on the wheel the left button OK and select the Menu Sportanzeigen for the G-Meter Have fun!
|
|
nm74
Closed beta tester
Posts: 7
|
Post by nm74 on Jan 5, 2021 16:26:42 GMT
ROAD SIGN DETECTION WITH CAMERA ONLY - For e-tron with road sign camera detection. - The car default evaluates the speed limit by a "fusion" of map data and front camera observed road signs. - It seems like it uses the map data as a basis and overrides this with camera observed road signs. - This would make the road sign info preferred over map data, as it should be (example: temporary road work signs) - The alternative value "Road sign detection" makes the system disgard map data and use camera only. - This might seem like a good idea in case of poor map data quality, but might be even worse with camera only.Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Road sign detection fusion mode Values: ---: Old value: Road sign detection New value: Road sign fusion I have quite a few roads around here where the map data is outdated compared to the signs. This change works perfectly fine, but the car always throws an error when it first sees the first sign it seems like. I'm not totally sure what the english translation would be, but it says something like the "Road sign detection is not working properly at the moment". So there seems like there are other parts that might need some coding too, or if there is a way to remove this error message. Same situation with 2021 e-tron with MIB-3. i also get always a warning message after changing this.
|
|
|
Post by struijs on Jan 6, 2021 23:28:30 GMT
After activating press on the wheel the left button OK and select the Menu Sportanzeigen for the G-Meter Have fun! That did the trick!!! Thanks!
|
|
|
Post by lomnex on Mar 8, 2021 21:52:37 GMT
|
|