|
|
Post by mauoro on Mar 12, 2021 3:10:11 GMT
Hi do you know how activate de etron dashboard on a 2020 E-Tron Advance?
Thx
|
|
|
|
Post by marhol on Mar 26, 2021 0:02:18 GMT
Hi,
Audi is revamping its infotainment system back-end technology for the 2021 model year. Promising a faster processing time, broader functionality, and a more extensive range of entertainment opportunities, the Modular Infotainment Toolkit (MIB 3) will power the Multimedia Interface (MMI) in many Audi vehicles by the fall of 2020.
I have a 2021, but unsure if OBDeleven will work at this point.
Have anyone successfully coded a 2021 model yet? I tried VideoInMotion, but it didn't work.
|
|
nm74
Closed beta tester
Posts: 7
|
Post by nm74 on Mar 26, 2021 19:09:23 GMT
Yes, e.g. the Scandinavian lights are working with MY21
|
|
|
|
Post by memoag12 on Apr 14, 2021 3:03:37 GMT
I have a etron 50 2021 in costa rica and almost anything is working with obdeleven, only been able to activate g force in dash. No wireless carplay.
Please if anyone knows how to activate wireless carplay in 2021 tell us.
Etron software version says 3385
|
|
|
|
Post by andreask on Apr 18, 2021 5:54:24 GMT
Hi there! Any more input on this? Did you try? I activated MA on my Q8 successfully, and am hoping that it will work on the e-Tron as well. |
|
|
|
Post by andreask on Apr 20, 2021 3:48:49 GMT
E-TRON OBDELEVEN TWEAKS- Revised and updated OBDeleven tweaks for e-tron - Confirmed on my 2019 european spec e-tron 55. - Coding done with car started without pushing brake pedal, handbrake on, seatbelt on, bonnet released but not raised. ENABLE VIRTUAL COCKPIT SPORT MENU LAP-TIMER- In Virtual Cocpit, Vehicle Fuctions menu, steering wheel menu button will show additional entries for "Sport" and "Lap Timer".Long coding Control unit: 17 Dash Board Values: Lap counter: Old value: No New value: Yes Acceleration display: Old value: No New value: Yes Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart LONG PRESS LOCK BUTTON ON REMOTE TO FOLD POWER MIRRORS- For e-tron with power mirrors
- Long press close on remote folds power mirrorsLong coding Control unit: 46 Central Module Comfort System Values: mirror_retraction_at_comfort_close: Old value: not active New value: active DISABLE SENSOR CONTROLLED REAR LID OPENING/CLOSING- For e-tron with foot gesture under rear bumper to open/close rear lid.
- Disables foot gesture opening and closing rear lid
- Might be useful if you have "nervous" sensors thet opens and closes when you dont want it toAdaptation Control unit: 46 Central Module Comfort System Name: Production mode Values: Deactivate sensor-controlled rear lid opening: Old value: not active New value: On ENABLE OFFROAD MENU IN MMI - Requires MMI reset after programming: push volume button down for more than 10sec.
- After tweak, from the range-mode menu, swipe to left for new offroad menu.
- 2019 e-tron did not display roll/pitch values in offroad menu, might be that e-tron uses a different msg_bus than "Comfort data bus" for roll/pitch values.Adaptation Control unit: 5F Information Control Unit Name: Car_Function_Adaptations_Gen2 Values: menu_display_compass: Old value: Not activated New value: activated menu_display_compass_over_threhold_high: Old value: Not activated New value: activated menu_display_angle_of_slope: Old value: Not activated New value: activated menu_display_angle_of_slope_over_threshold_high: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 Values: compass_0x15: Old value: Not activated New value: activated compass_0x15_msg_bus: Old value: Not activated New value: Comfort data bus angle_of_slope_0x24: Old value: Not activated New value: activated angle_of_slope_0x24_msg_bus: Old value: Not activated New value: Comfort data bus Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart. ENABLE WIRELESS APPLE CARPLAY - European 2019 e-trons had the 5GHz WLAN disabled, which made Carplay work only on wired connection.
- To use wireless Carplay wireless after mod, phone must connect to both Bluetooth and the new appearing Audi 5GHz WLAN.Adaptation Control unit: 5F Information Control Unit Name: Vehicle configuration Values: wlan_5ghz_switch: Old value: Not activated New value: Activated Apple_DIO_Wireless: Old value: Off New value: On ROAD SIGN DETECTION WITH CAMERA ONLY - For e-tron with road sign camera detection.
- The car default evaluates the speed limit by a "fusion" of map data and front camera observed road signs.
- It seems like it uses the map data as a basis and overrides this with camera observed road signs.
- This would make the road sign info preferred over map data, as it should be (example: temporary road work signs)
- The alternative value "Road sign detection" makes the system disgard map data and use camera only.
- This might seem like a good idea in case of poor map data quality, but might be even worse with camera only.Adaptation Control unit: A5 Front Sensors Driver Assistance System Name: Road sign detection fusion mode Values: ---: Old value: Road sign detection New value: Road sign fusion DISABLE REAR LID OPENING WITH REMOTE KEY- Disable opening of rear lid when double clicking the middle button on the remote key
- Alternatively set the value to "0.40 s" to keep the function, but only with rapid double click.Adaptation Control unit: 46 Central Module Comfort System Name: Heckklappe öffnen durch Doppelbetätigung der Funkfernbedienung Value: Time window for double-actuation Old value: 1.40 s New value: 0 s PARKING ASSIST CAMERA AT SPEED > 30 KM/H
- Normally the parking assist camera switches off when the speed of the car exceeds 30 km/h (not at 150 km/h as stated below?).
- After tweak this stays on, so you could use it eg as a blind spot camera or otherwise.Adaptation Control unit: A5 Driver Assistance Name: Switch-off speed for parking assist Old value: 150 New value: 140 TRAILER MANOUVER ASSIST - Verified on e-tron with 360 camera and factory trailer hitch
- Finger touch control on lower MMI display to control trailer angle when reversing
- Car handles steering wheel automatically according to touch input
- Creates new meny icon on top of lower display (grayed out until trailer connector is attached)
- Verified on e-tron with 360 camera and factory trailer hitchLong coding: Control unit: 09 Central Electrics Name: ARA Old value: Not installed New value: Installed Long coding: Control unit: 44 Steering Assistance Name: Trailer manouver assist Old value: Not active New value: Active Long coding: Control unit: 46 Comfort System Name: Trailer monitoring Old value: Not active New value: Active Long coding: Control unit: A5 Driver Assistance Name: FW_ARA_BCM Old value: Not installed New value: Installed Name: TMA_Trailer_manouver_assist Old value: Not installed New value: Installed Name: TMA_Trailer_manouver_assist_image_processing Old value: Not installed New value: Installed Adaptation Control unit: 5F Multimedia Name: Car_Function_Adaptations_Gen2 Values: menu_display_trailer_assistant: Old value: Not activated New value: Activated menu_display_trailer_assistant_over_threshold_high: Old value: Not activated New value: Activated Name: Car_Function_List_BAP_Gen2 Values: Trailer_Assistant_0x36: Old value: Not activated New value: Activated Trailer_Assistant_msg_bus_0x36: Old value: none New value: Terminal 15 Restart MMI after coding: Push down center console volume knob for 10 seconds, wait for MMI restart. Hi otam! Really good update. Referring to Trailer assist - Does this also activate the Maneouver assist function? The one helping out with automated steering to avoid obstacles as well as automatic breaking when getting too close to obstacles..? On my Q8 I activated Maneouver assist, but this also involved coding 03 Brakes which I don’t see you did above.. Thanks! |
|
otam
New Member
Posts: 8
|
Post by otam on Apr 20, 2021 15:38:45 GMT
Hello
I tried the additional MA coding from the Q8 (exept brakes), it seemed to work but didnt auto-break (gave a kind of warning message that brakes could not be engaged). As I dont experiment with brakes coding, I reverted the MA coding.
NB - the e-tron does not have the same hardware for 03 brakes as the Q8, so the Q8 brakes coding for manouver assist (MA) cannot be used.
|
|
|
|
Post by andreask on Apr 21, 2021 19:02:42 GMT
otam, thanks! ... seems we would need to find an e-tron specced with working MA to figure out some of the bytes and bits then 😅...
|
|
|
|
Post by jonerik on Apr 22, 2021 8:44:45 GMT
Is there any possibility of automatic lock after I leave the car?
How?
|
|
|
|
Post by jonerik on Apr 22, 2021 8:48:18 GMT
What is the difference between Scandinavian lights on and off?
|
|
otam
New Member
Posts: 8
|
Post by otam on Apr 29, 2021 21:01:26 GMT
E-TRON 2019 OBDELEVEN TWEAKS
- Update 2021-04-29: LANE ASSIST, VC "G-METER", VC "TIRE PRESSURE"
- Coding confirmed on my 2019 european spec e-tron 55.
- Coding done with car started without pushing brake pedal, handbrake on, seatbelt on, bonnet released but not raised.
LANE ASSIST REMEMBER ON/OFF SETTING
- Lane assist is default on every time you start the car.
- This makes lane assist stay off till next time you turn it on, regardless of car restart.
- NB! This is a security feature, you should reset it to standard (Activated) if you pass the car on to others.
A5 Front Sensors Driver Assistance System
Adaptation
Personalization of lane dept. warning Cl. 15 on
Old value: Activated
New value: Last setting
ENABLE NEW MENU "LAP-TIMER" IN VIRTUAL COCKPIT
- In Virtual Cocpit, Vehicle Fuctions menu, steering wheel menu button will show additional entries for "Lap Timer".
17 Dash Board
Long coding
Lap counter
Old value: No
New value: Yes
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart
ENABLE NEW MENU "SPORT" AND "G-METER" IN VIRTUAL COCKPIT
- In Virtual Cocpit, Vehicle Fuctions menu, steering wheel menu button will show new "Sport" menu and a G-meter is available here.
17 Dash Board
Long coding
Acceleration display
Old value: No
New value: Yes
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart
ENABLE NEW MENU "SPORT" AND "TIRE PRESSURE" IN VIRTUAL COCKPIT
- For cars that have active TPMS that shows the actual tire pressure in each tire (most have passive TPMS)
- In Virtual Cocpit, Vehicle Fuctions menu, steering wheel menu button will show new "Sport" menu and a tire pressure view is available here.
17 Dash Board
Long coding
Acceleration display
Old value: No
New value: Yes
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart
LONG PRESS LOCK BUTTON ON REMOTE TO FOLD POWER MIRRORS
- For e-tron with power mirrors
- Long press close on remote folds power mirrors
Control unit: 46 Central Module Comfort System
Long coding
Mirror_retraction_at_comfort_close:
Old value: not active
New value: active
DISABLE SENSOR CONTROLLED REAR LID OPENING/CLOSING
- For e-tron with foot gesture under rear bumper to open/close rear lid.
- Disables foot gesture opening and closing rear lid
- Might be useful if you have "nervous" sensors thet opens and closes when you dont want it to
46 Central Module Comfort System
Adaptation
Production mode
Deactivate sensor-controlled rear lid opening
Old value: Not active
New value: Active
ENABLE OFFROAD MENU IN MMI
- Requires MMI reset after programming: push volume button down for more than 10sec.
- After tweak, from the range-mode menu, swipe to left for new offroad menu.
- 2019 e-tron did not display roll/pitch values in offroad menu, might be that e-tron uses a different msg_bus than "Comfort data bus" for roll/pitch values.
5F Information Control Unit
Adaptation
Car_Function_Adaptations_Gen2
Menu_display_compass:
Old value: Not activated
New value: activated
Menu_display_compass_over_threhold_high:
Old value: Not activated
New value: activated
Menu_display_angle_of_slope:
Old value: Not activated
New value: activated
Menu_display_angle_of_slope_over_threshold_high:
Old value: Not activated
New value: activated
Car_Function_Adaptations_Gen2
Compass_0x15
Old value: Not activated
New value: activated
Compass_0x15_msg_bus
Old value: Not activated
New value: Comfort data bus
Angle_of_slope_0x24
Old value: Not activated
New value: activated
Angle_of_slope_0x24_msg_bus:
Old value: Not activated
New value: Comfort data bus
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart.
ENABLE WIRELESS APPLE CARPLAY
- European 2019 e-trons had the 5GHz WLAN disabled, which made Carplay work only on wired connection.
- To use wireless Carplay wireless after mod, phone must connect to both Bluetooth and the new appearing Audi 5GHz WLAN.
5F Information Control Unit
Adaptation
Vehicle configuration
Wlan_5ghz_switch
Old value: Not activated
New value: Activated
Apple_DIO_Wireless
Old value: Off
New value: On
ROAD SIGN DETECTION WITH CAMERA ONLY
- For e-tron with road sign camera detection.
- The car default evaluates the speed limit by a "fusion" of map data and front camera observed road signs.
- It seems like it uses the map data as a basis and overrides this with camera observed road signs.
- This would make the road sign info preferred over map data, as it should be (example: temporary road work signs)
- The alternative value "Road sign detection" makes the system disgard map data and use camera only.
- NB! This might seem like a good idea in case of poor map data quality, but might be even worse with camera only.
A5 Front Sensors Driver Assistance System
Adaptation
Road sign detection fusion mode
---
Old value: Road sign detection
New value: Road sign fusion
DISABLE REAR LID OPENING WITH REMOTE KEY
- Disable opening of rear lid when double clicking the middle button on the remote key
- Alternatively set the value to "0.40 s" to keep the function, but only with rapid double click.
46 Central Module Comfort System
Adaptation
Heckklappe öffnen durch Doppelbetätigung der Funkfernbedienung
Time window for double-actuation
Old value: 1.40 s
New value: 0 s
PARKING ASSIST CAMERA AT SPEED > 10 KM/H
- Verified on e-tron with 360 camera.
- Normally the parking assist camera cannot be activated if speed exceeds 10 km/h.
- After tweak, camera (and 3d view if you have it) can be activated up to the given new speed.
A5 Driver Assistance
Adaptation
Name: Switch-off speed for parking assist
Old value: 10
New value: 150
TRAILER MANOUVER ASSIST
- Very nice and impressing feature, lookup on youtube: "Audi A6 allroad quattro met trailer assist"
- Finger touch control on lower MMI display to control trailer angle when reversing
- Car handles steering wheel automatically according to touch input
- Creates new meny icon on top of lower display (grayed out until trailer connector is attached)
- Verified on european e-tron with 360 camera and factory trailer hitch
09 Central Electrics
Long coding
ARA
Old value: Not installed
New value: Installed
44 Steering Assistance
Long coding
Trailer manouver assist
Old value: Not active
New value: Active
46 Comfort System
Long coding
Trailer monitoring
Old value: Not active
New value: Active
A5 Driver Assistance
Long coding
FW_ARA_BCM
Old value: Not installed
New value: Installed
TMA_Trailer_manouver_assist
Old value: Not installed
New value: Installed
TMA_Trailer_manouver_assist_image_processing
Old value: Not installed
New value: Installed
5F Multimedia
Adaptation
Car_Function_Adaptations_Gen2
Menu_display_trailer_assistant
Old value: Not activated
New value: Activated
Menu_display_trailer_assistant_over_threshold_high
Old value: Not activated
New value: Activated
Car_Function_List_BAP_Gen2
Trailer_Assistant_0x36:
Old value: Not activated
New value: Activated
Trailer_Assistant_msg_bus_0x36
Old value: none
New value: Terminal 15
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart.
|
|
|
|
Post by kingkang on Apr 30, 2021 8:14:23 GMT
Great work on the lane assist, looking forward to trying it out!
|
|
|
|
Post by mattty11276 on May 19, 2021 19:36:18 GMT
Hello Everyone... I'm new to E-Tron and the group (2020 E-Tron Sportback PP):
I just purchased and OBD Eleven, but am most interested in being able to keep the parking lights on over 20mph so I can use longer until darker and headlights actually needed. Is this possible?
I'm also interested in lowering the ride height by about 15mm - I know you can go up to 17mm without throwing codes, but does anyone have feedback or experience doing this yet?
|
|
|
|
Post by bostjanlaba on Jun 22, 2021 10:09:36 GMT
Hi guys,
I have pretty well equipped etron but without parking assistance. I am wondering if i have all the hardware installed but just need to program enable it? any idea how?
|
|
|
|
Post by eddy747 on Jun 23, 2021 20:28:49 GMT
Hi guys, anyone have the figure out the correct msg_bus for the roll/pitch values to work in the offroad menu in MMI?
ENABLE OFFROAD MENU IN MMI
- Requires MMI reset after programming: push volume button down for more than 10sec.
- After tweak, from the range-mode menu, swipe to left for new offroad menu.
- 2019 e-tron did not display roll/pitch values in offroad menu, might be that e-tron uses a different msg_bus than "Comfort data bus" for roll/pitch values.
5F Information Control Unit
Adaptation
Car_Function_Adaptations_Gen2
Menu_display_compass:
Old value: Not activated
New value: activated
Menu_display_compass_over_threhold_high:
Old value: Not activated
New value: activated
Menu_display_angle_of_slope:
Old value: Not activated
New value: activated
Menu_display_angle_of_slope_over_threshold_high:
Old value: Not activated
New value: activated
(Car_Function_Adaptations_Gen2- Incorrect) Correct: Car_Function_List_BAP_Gen2
Compass_0x15
Old value: Not activated
New value: activated
Compass_0x15_msg_bus
Old value: Not activated
New value: Comfort data bus
Angle_of_slope_0x24
Old value: Not activated
New value: activated
Angle_of_slope_0x24_msg_bus:
Old value: Not activated
New value: Comfort data bus
Restart MMI after coding
Push down center console volume knob for 10 seconds, wait for MMI restart.
|
|
|
|
Post by tijgert on Jun 29, 2021 17:43:17 GMT
Hello dear fellow Etron owners! I got my slightly used European (German) model 2021 S Sportback in yesterday and am so far hating the fact that from 2021 Apple CarPlay is a Function on Demand! Can’t be helped, I know, that’s fine, suck it up. Though I wouldn’t mind learning if wireless CarPlay with the mod works if I buy the option. What I really do care about is Video in Motion... for the kids. Has anyone got that, or other tweaks, to work on a 2021 model? I read the G meter works on a 2021? One small extra question: I noticed an audio lag when watching any video on an iPhone/iPad with the sound coming over the Audi Music Interface via Bluetooth. Has anyone else noticed this? Is there a magic code to reduce the audio lag? Hoping to be able to contribute one day  |
|
|
|
Post by eddy747 on Jul 2, 2021 3:23:08 GMT
Hi guys, anyone have the figure out the correct msg_bus for the roll/pitch values to work in the offroad menu in MMI? ENABLE OFFROAD MENU IN MMI - Requires MMI reset after programming: push volume button down for more than 10sec. - After tweak, from the range-mode menu, swipe to left for new offroad menu. - 2019 e-tron did not display roll/pitch values in offroad menu, might be that e-tron uses a different msg_bus than "Comfort data bus" for roll/pitch values. 5F Information Control Unit Adaptation Car_Function_Adaptations_Gen2 Menu_display_compass: Old value: Not activated New value: activated Menu_display_compass_over_threhold_high: Old value: Not activated New value: activated Menu_display_angle_of_slope: Old value: Not activated New value: activated Menu_display_angle_of_slope_over_threshold_high: Old value: Not activated New value: activated ( Car_Function_Adaptations_Gen2- Incorrect) Correct: Car_Function_List_BAP_Gen2 Compass_0x15 Old value: Not activated New value: activated Compass_0x15_msg_bus Old value: Not activated New value: Comfort data bus Angle_of_slope_0x24 Old value: Not activated New value: activated Angle_of_slope_0x24_msg_bus: Old value: Not activated New value: Comfort data bus Restart MMI after coding Push down center console volume knob for 10 seconds, wait for MMI restart. Tried all the buses and non work. I have an e-Tron Edition One (prestige) US... Maybe because the air suspension? |
|
|
|
Post by sourdoughjosh on Jul 4, 2021 17:13:14 GMT
ENABLE OFFROAD MENU IN MMI
- Requires MMI reset after programming: push volume button down for more than 10sec.
- After tweak, from the range-mode menu, swipe to left for new offroad menu.
- An e-tron 2019 did not display roll/pitch values in offroad menu,
- maybe e-tron might use a different msg_bus than "Comfort data bus" for roll/pitch values.
Adaptation Control unit: 5F Information Control Unit Name: Car_Function_Adaptations_Gen2 Values: menu_display_compass: Old value: Not activated New value: activated menu_display_compass_over_threhold_high: Old value: Not activated New value: activated menu_display_angle_of_slope: Old value: Not activated New value: activated menu_display_angle_of_slope_over_threshold_high: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 Values: compass_0x15: Old value: Not activated New value: activated compass_0x15_msg_bus: Old value: Not activated New value: Comfort data bus angle_of_slope_0x24: Old value: Not activated New value: activated angle_of_slope_0x24_msg_bus: Old value: Not activated New value: Comfort data bus Has anyone gotten this to work on a 2021 MY? I found the first set of Adaptations under "Vehicle Menu Operation" and the second under "Vehicle Function List BAP", but even after making the identical changes here and restarting, a swipe left on the Vehicle Info screen (where the Range Mode button resides) does nothing. TIA. |
|
|
|
Post by kingkang on Jul 7, 2021 6:40:21 GMT
Same here for 2021, are we missing something or is this feature just missing for the 2021?
|
|
|
|
Post by skjalg on Nov 11, 2021 18:25:24 GMT
Hi. Concerning the immense usage of washer fluid every time you turn on your car and it start automatic washing of the laser scanner, on the E-Tron 2019. This is a known issue that you can have the Audi dealer fix, but I think it is better to have the opportunity to do it myself. This coding worked for me;
Car: Audi e-tron S
Year: 2019
Body type: SUV
Engine:
----------------------------------------
Long coding
Control unit: 09 Central Electrics
Values:
Laserscanner_wasching:
Old value: installed
New value: not_installed
|
|
|
|
Post by viktorw on Nov 20, 2021 19:23:29 GMT
Hello guys.
I managed to Code maneuver assist on my 2020 etron. But after an error which I couldn’t erase (also maneuver assist) I went to Audi. And they coded it to stock.
Before I was at Audi maneuver assist worked and also stoped but itself.
After being at Audi I coded it again. It also shows it in mmi but don’t stop.
Audi only change bcm ecu in warranty.
Does someone know why it worked before ? ( they also updated a5 ecu from 0295 to 0365)
|
|
|
|
Post by aprp21 on Jan 30, 2022 9:11:06 GMT
Hi,
is it possible to active Matrix led function for headlights with obdeleven ? this function available as ondemand in my car 2020 etron 50 and is a software update.
|
|
|
|
Post by mmmalmi on Sept 28, 2022 13:13:47 GMT
Does anyone know how to set coming/leaving home lights without low beams, just drl?
I was able to do this with my previous TTS mk3 and matrix lights, but wondering if it's possible for E-tron.
|
|
|
|
Post by cocanetor on Dec 14, 2022 1:26:47 GMT
Hello there memo, what device did you have. I am trying to identify which version do we need for those configurations. Thanks I have a etron 50 2021 in costa rica and almost anything is working with obdeleven, only been able to activate g force in dash. No wireless carplay. Please if anyone knows how to activate wireless carplay in 2021 tell us. Etron software version says 3385 |
|
|
|
Post by looneeii on Dec 19, 2022 14:47:07 GMT
Anyone have the VIM on MIB3 working yet?
|
|
|
|
Post by bhanvadia on Dec 27, 2022 16:14:06 GMT
hi guys with MY2022 etron built after June 2021 can have wireless Android Auto, anyone with newer models can you share your backup?
Update Log:
MY2021V2 - > MY 2022 (from build week 25 2021)
vin nr has N as 10 digit for 2022 model example: WAUZZZGE0NB000625
New paint color available: Chronos grey
Alcantara is replaced with Dinamica
Black optics plus package available (black rings)
Black Edition with orange details in interior
New packages for the US marked
The streaming service Apple Music is now available optionally as a new Audi connect service, only in selected markets.
Support for Wirless Android Auto
Shortcut to charging screen in MMI added to lower MMI screen
|
|
|
|
Post by memoag12 on Jan 25, 2023 3:04:14 GMT
I have OBD ultimate and already figure it out how to enable wireless carplay in etron 2021+
|
|
|
|
Post by dctron on Feb 25, 2023 13:43:59 GMT
Just received my OBDeleven for use with a '19 "Fat" e-tron.
I have not had a lot of experimentation time, but I really just bought it for two things.
1. Access to battery temperature information (HV battery)
2. Access to the engineering screens via the MMI
Any ideas or shortcuts on those two items would be appreciated.
So far I have adjusted the parking assist camera. (THANK YOU)
|
|
|
|
Post by vender on May 22, 2023 15:56:41 GMT
Hello I've followed all the steps described by otam to active trailer manoeuvering assistant on my Audi e Tron 2019 but the button stays greyed out with a trailer attached and the centeral control unit says that trailer manoeuvering assistant is not available because parking assistance is coded wrong and power train coordinator is coded wrong?
|
|
|
|
Post by logicpro8 on Jun 9, 2023 14:21:28 GMT
Great list of tweaks, is there any way to turn on Audi AVAS pedestrian warning sounds, 2019 cars had the hardware but didn't use it, my car is silent on reverse lol, 2020 cars get sounds on reverse and in drive, 2019 cars only get slight sound after 10mph.
2019 Car
Address C0: Act. for Ext. Noise (J943) Labels:* None
Part No SW: 4KE 035 335 HW: 3F0 035 335
Component: E_SOUND_SGH05 0121
Serial number: EN193837410000
Coding: 04
Shop #: WSC 00046 412 00046
ASAM Dataset: EV_ESoundMLBEvoS1NN 003008
ROD: EV_ESoundMLBEvoS1NN.rod
VCID: 77ABEB937F4E0A73621-8022
No fault code found.
2020 Car
Address C0: Act. for Ext. Noise (J943) Labels:* None
Part No SW: 4KE 035 335 A HW: 3F0 035 335
Component: E_SOUND_SGH07 0462
Serial number: E2101024620000
Coding: 04
Shop #: WSC 00046 412 00046
ASAM Dataset: EV_ESoundMLBEvoS1NN 003009
ROD: EV_ESoundMLBEvoS1NN.rod
VCID: B822C3AAD2A0929B9F3-81EC
No fault code found.
just not sure what coding would need done. where to start looking?
|
|
