Leon Coding and Adaptations

Have tried this and it works perfectly thank to hitz,

As I say in some parts of the world this is not street legal and i am not sure how long the bulbs will last but anyway its good in that it does work.

So the instruction are:

Log on to the car.

1/ Select control unit 09 Central Electrics

First change left side

2/ Select Leuchte 0 BLK VL B36-Lichtfunktion C 0
3/ Change to Standlicht allgemein (Schlusslitch; Positionslicht; Begrenzungslicht) - Parking light in general (tail lamp, position light, marker light)
4/ Save with green tick and when asked enter security code 31347
5/ Select Dimmwert CD 0 and change to a number between 0 - 100 (100 being brightest) and tick green box
6/ Select Lichtfunktion E 0 and change to Blinken links Dunkelphase and tick green box
7/ Select Dimming Direction EF 0 and change to minimize and tick green box

Left side is not complete, go outside and look at your indicator.

Now on to the right side

8/ Select Leuchte1BLK VRB20
9/ Select Lichtfunktion C 1 and change to Standlicht allgemein (Schlusslitch; Positionslicht; Begrenzungslicht) - translation above
10/ Save the change using green tick and enter security code 31347 when asked.
11/ Select Dimmwert CD 1 and change to a number between 0 - 100 (100 being brightest) and tick green box
12/ Select Lichtfunktion E 0 and change to Blinken links Dunkelphase and tick green box
13/ Dimming Direction EF 0 and change to minimize then tick green box to save change


I have done a video of this side just so you can see how it works

forum.obdeleven.com/post/1407 there are three options here, I see you are on the Golf forum as well and this coding is only for the LEON as the golf has different setup on this lighting channel.

Red all modes,
Flashing lights (when you indicate) however i have not found coding that makes it only work on the side you are indicating.
Red when reversing

if you have a Cupra you can also adjust the colour of the cupra button so it does not go yellow when you select cupra but stays red.

Also can I have instructions for your rear light setup

Your car is beautiful 👍🏽

Add menu to Mirrors and Wipers that allows you to have an auto wipe of the rear wiper when you select Reverse.

Coding
Select Control Unit 09 (Central Electronics)
Select Adapations
Select Rear Window Wiper
Select Menuesteuerung Komfortwischen HW: and change value to Active.

Go to main settings menu and go to bottom and select factory reset.
Reset all or just the mirrors and Wipers and you menu will now appear.

Thanks to Don (DV52)

Turn on Power Steering even when engine not running.

Select Control Unit: 44 Steering Assistance
Select Activation of pwr steering asst without engine running
Change value from not active to active
Save using Green Tick.

Not tried it, have you done a factory reset on the MIB Unit as sometimes you have to do that to get the change to work.

Has anyone done this mod ?

If yes have you the code to do it.
Cheers.

Thanks will take a look.

No I have not got the code, nor have i seen one (but there must be one)

Within OBD11 there is a tool that you can run that will search for all the codes (its on this site and on youtube if you search).

Audi Engine - Throttle response
according to some if you change your make to Audi then the throttle response is much faster

Select Control Unit 01: Engine
Select Long Coding (1)
Select byte 0
You will see that Bit 0, 1 & 2 are all one option if you select it you will be given a dropdown list, select Audi from the list and save.
Save using the Green Tick


Read more: forum.obdeleven.com/thread/764/coding-adaptations#ixzz5RNUVEU3B. Hat jemand schon probiert. Ist besser oder nicht?

Hello,

I'm wondering why resetting the oil change warning is only possible with the application? Resetting service interval can be done on the normal way too. Is there no way to reset oil change manually in control unit like the service interval?

Regards

Hi, I’ve got Leon 5f 2013. Yesterday I had fantastic plan to do basic settings of steering wheel angle sensor. I did reset to factory settings, and boom. I have now esc system fault, steering system fault, tyres pressure monitoring system fault, s&s system fault and parking radar doesnt work. Steering wheel works weird, Stg 44 have fault about steering angle sensor no basic settings, and its not calibrated. I tried to do basic settings but still no working. Anybody knows how to calibrate steering angle sensor? I go to basic settings in stg 44, run steering angle sensor initialization the steereing wheel moves left and right by own until its done but seems nothing calibrated at all. I did it couple of times without any result. Then I go to steering angle sensor in basic settings. Run. During this process I turn steering wheel all way round to the left, then to the right and then stop. Sensor still not calibrated. I have no idea what to do or what did I wrong. Please help!