eddie
Closed beta tester
Posts: 6 
|
Post by eddie on Aug 29, 2017 15:28:17 GMT
Eddie is this what you are after Intensity lights DRL LED lights With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.1 - Module 09 - Electronic. Code (31347) 2 - Adaptation 3 - Select - Leuchte2SL VLB10 4 - Sub - Dimmwert CD 2 5 - Change the desired value. Default 266 - Select - Leuchte3SL VRB21 7 - Sub - Dimmwert CD 3 8 - Change to the desired value. Default 26127 maximum allowed Hi, thank u so much for a quick reply. I saw this coding in first page, but this is only for the switch in on "0" or also when I switch in position light?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 29, 2017 19:04:12 GMT
|
|
eddie
Closed beta tester
Posts: 6
|
Post by eddie on Aug 30, 2017 7:54:20 GMT
Thanks again! I will try!
|
|
|
|
Post by Niallain on Sept 7, 2017 9:41:26 GMT
Does anyone have any info on a 0-60 timer? Apparently you can do this with caristaapp.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2017 10:42:46 GMT
The leon comes with a lap timer that records start to finish if that is what you mean.
|
|
|
|
Post by Niallain on Sept 7, 2017 15:32:43 GMT
The leon comes with a lap timer that records start to finish if that is what you mean. I've got the lap timer enabled already, apparently there is a 0-60mph feature that can be enabled somewhere. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2017 15:37:42 GMT
sorry cant help not seen anything like that, the only other obvious place is Live Data but I don't recall seeing anything there either.
|
|
|
|
Post by leon70 on Sept 15, 2017 15:30:39 GMT
Good evening, my name is Angelo. You have the encoding to activate the light sensor and aftermarket rain on Leon 5F 2015?
The interface i use is a vcds 17.8 or OBDELEVEN.
Thank you.
|
|
eddie
Closed beta tester
Posts: 6
|
Post by eddie on Sept 21, 2017 7:19:18 GMT
Hi to all!
I made this change
Module 09 (cent. elect.)
Security acess -> Funzione 16
Electronic. Code 31347
Adaptation -> Funzione 10
(4) -Daytime running lights - Standlicht aktiviert zusaetzlich Tagfahrlicht
change value on "active"
increasing daytime running lights on 127 (max power DRL) can ruin or wear very sooner?
|
|
|
|
Post by Indian74 on Sept 22, 2017 9:35:05 GMT
Hello Guys !
How are you ! i actived some options in my Set Leon Cupra 2014, but i want to know how i can active this option :
Thanks a lot for you help !
++
|
|
|
|
Post by theoldboy on Sept 22, 2017 16:21:18 GMT
If you read the comments it tells you to go to ankk-vagcom.com/category/codages_vagcom/seat/seat_leon_5f/ and there you will find the coding to do this. If you cant read the language then use Firefox Browser and tools / translate the page. If you dont understand the coding to convert to OBD11 Then give us the link and we will try and help. |
|
|
|
Post by Indian74 on Sept 26, 2017 9:15:54 GMT
^HEllo !
Thanks for your email, and if i have the codage, is it possible to code with ODBeleven ? Pro ? i think ?
|
|
|
|
Post by theoldboy on Sept 26, 2017 11:02:10 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2017 15:38:38 GMT
|
|
|
|
Post by ItsJustTomm on Oct 1, 2017 10:42:29 GMT
Hi Guys,
Im currently waiting for the delivery of my 2017 SEAT Leon FR 1.4 EcoTSI 5 Door; it should be here around early November.
Now I realise I may be in the wrong section for this, but there is little; if any info regarding Coding/Adaptations & Apps in the N 2017 forum area.
In regards to the Coding & Adaptations posted, are they all applicable to the N 2017 car?
As a side questions, could someone confirm if I would need the Radar in the front grille or the sensor in the windscreen for the following Adaptations;
- Automatic Headlight ?
- Traffic Sign Recognition ?
- Adaptive Cruise Control ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 1, 2017 17:59:16 GMT
ItsJustTomm, afraid these sites only work well if people update what they find, with regards to coding as you have seen check out obdeleven.proboards.com/thread/1887/coding-adaptions this has all the coding that i managed to find that is the same and what has changed. As you have access to a new car then the adaptions (which have nice labels to help you) you should be able to try stuff out and see if it works. The changes between facelift and old cars is that the setup is different so if you follow coding and you cant find stuff then you know its changed. The spanish site www.clubseatleon.net/viewtopic.php?f=8&t=116700&sid=0b10fd4f82dd80bc90174f197e88c683 has lots of good information (just use google translate in firefox to help) but i seem to recall there are some links to the facelift cars but i dont have them i am afraid If you enable stuff that you don't have (I did that with blind spot activation but had no side sensors) you will get an error message when you run a scan, history will show you what you changed and you then roll it back.... If it works then update so others can follow. I know it don't help but if this model is like the previous ones then check out the facelift Golf for other stuff that you can do. Not everything is the same but there is a lot that is (or it was on my model). With regards to side questions. Traffic Sign Recognition, it needs the camera as the software looks at the satnav and at the actual road signs Adaptive Cruise Control - Dont know (as mine came with it) but as it slows the car down if the car in front is below your preset speed so I assume you need Radar as its the obvious answer. |
|
|
|
Post by stepdey on Oct 5, 2017 12:17:53 GMT
Thanks for this post, very helpful. |
|
|
|
Post by krystian660 on Nov 7, 2017 18:08:42 GMT
Hello,
Does anyone know how to turn off the cold LED DRL test? The warning lights up after setting changes.
And how to enable automatic window closure without holding the button.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 7, 2017 20:10:30 GMT
krystian660, is your car facelift or pre facelift please.
Not sure I understand the cold LED DRL test can you give more detail please.
When you talk about automatic window closure are you after rain close or one touch open/close.
|
|
|
|
Post by kubinf on Nov 24, 2017 16:58:50 GMT
Hi,
does somebody know how to activate the headlight burst not only for the center LED lights, but for the whole LED lights? Basically I want this:
When I press the burst (led switch pull towards me) to swicth on the additional center LED full beams and with that to move the lights up. As it does when you push the switch from you to switch on the full beams.
Thanks
|
|
byong
New Member
Posts: 12
|
Post by byong on Nov 29, 2017 4:10:03 GMT
Hi,
can anyone share how to code the driver side interior/dome light to work separately and not turning all the lights on (passenger and both rear lights)?
tia👍🏻
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 2, 2017 18:23:50 GMT
Just recording a change i have seen hereA couple other tweaks that remove the electrical nannies and really help the car feel more natural on a road course is to set the ABS long coding byte 29 to “08” (which removes ESC when you hold the button by the shifter for 5sec) - This is for the golf not worked out how this works on the leon yet. Then disabling the “straight ahead brake stabilization”. The stabilization setting is most noticeable at higher speeds, if you have ever felt your car tug back and fourth this is the system doing some weird stuff behind the scenes and it can make for a sketchy scenario with it on when you are deep in the triple digits on a German Motorway or a Track Day. Control Unit 03 Breaks Adaptations Straight ahead brake stabilization change to not activated I have not tried these on my car yet but as always if you make these changes to your car you do it at your own risk. And lastly check out the change to the Limited Slip Diff here |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2017 11:58:27 GMT
Hi, can anyone share how to code the driver side interior/dome light to work separately and not turning all the lights on (passenger and both rear lights)? tia👍🏻 Will have a look for some coding (although I have seen nothing before on this subject) but are you saying if the drivers door opens then only drivers side light works. If any other door opens then all the lights work. |
|
|
|
Post by kubinf on Dec 5, 2017 15:26:59 GMT
Hello, anyone know something about how to code the burst act the same as the full beam? (To move the lights up)
Thanks
|
|
byong
New Member
Posts: 12
|
Post by byong on Dec 5, 2017 16:51:11 GMT
Hi, can anyone share how to code the driver side interior/dome light to work separately and not turning all the lights on (passenger and both rear lights)? tia👍🏻 Will have a look for some coding (although I have seen nothing before on this subject) but are you saying if the drivers door opens then only drivers side light works. If any other door opens then all the lights work. thanks for the response cupra280 i'm looking to have scenario 1+2 or just scenario 3 scenario 1 when any door open -all lights will work scenario 2 when doors are closed -when driver side button pressed, the driver side should only work and NOT all the lights, which currently the case from the factory, since most of the time I'm alone during the night and don't want to open all the lights if just need to light the driver side. scenario 3 any door open or closed -interior light button to work independently -light will only ON on which door is open -when individually pressed it will ON individually as well not some sort of combinations of front and rear -ideal situation if scenario 1 & 2 is not possible to combine |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2017 10:30:00 GMT
byong, had a look on the web and a chat on the golf forum (as they have simular setup) and i am afraid for the pre facelift cars they all show as just being dumb on off lights.
If the facelift models i know the door lights have more options but dont have access to a newer car so can see if there is any tweaking on the other interior lights.
Sorry cant be of more help.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2017 15:43:43 GMT
sharing another find today, thanks to DV52 and Daniel for this tweak. This change was tested on a 2014 Cupra 280 and worked fine. The Mode button changes color to yellow when you select Cupra Mode, with the following change the color stays the same as all the other buttons. Select Module 09 Central Electronics Then Long Coding and select option 1 at the top of the screen Using the blue arrows at the bottom of the screen go to Byte 15 Then Tick Bit 7 (Drive Select Button without function light) Then save via the green tick box. See the screen shot below for how it will look before you edit it.  |
|
|
|
Post by toffel86 on Dec 13, 2017 15:18:23 GMT
Bitte um Hilfe. Was heisst adaption?
Activate front fog lamps when reversing
With this mod, when engaging reverse the front fog lights come on.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - static cornering light
4 - Sub - Bei rueckwaertsfahrt
5 - Change value to OFF
Wenn ich Module09 muss ich noch irgendwo rein damit ich static cornerinh light finde.Nur wo???
|
|
|
|
Post by Daniel (Germany) on Dec 13, 2017 15:35:48 GMT
Adaption ist im deutschen menü Anpassung. Und dann musst du die weiterung punkte suchen. Ist aber alles kein hexenwerk.
|
|
|
|
Post by toffel86 on Dec 13, 2017 15:39:46 GMT
Super dankeschön.
|
|
