Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2017 14:56:17 GMT
It does not work, I followed the instructions exactly. Coming Home does not even work on dipped lights, it does not light up. OK So you don't have the facelift model where we have seen some issues. You will have to bear with me as I am new to this as well and my car has this as standard. Firstly have you checked your history to confirm everything has been accepted. Secondly do you have your lights on manual or auto (just try it on the other setting to see if it makes a difference) Do you see the following items in your car settings menu (under lights)  |
|
brot
New Member
Posts: 8 
|
Post by brot on May 8, 2017 15:03:06 GMT
Snažil Jsem Je Oba světelné Indikátory na kyslíku se beze zmeny
kódování přijato, Ověřeno Bylo
In the menu, I do not see leaving home, only coming home
si vzpomněl, že nemám dešťový senzor
Diky za pomoc
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2017 17:03:12 GMT
Snažil Jsem Je Oba světelné Indikátory na kyslíku se beze zmeny kódování přijato, Ověřeno Bylo In the menu, I do not see leaving home, only coming home si vzpomněl, že nemám dešťový senzor Diky za pomoc Sorry been tied up, the only other code I can see is the below but it does not mention about working without rain sensor. Comin Home Lighting Duration Select Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation (3) Comfort illumination-Menueeinstellung Cominghome Value (Default: 15 seconds - maximum: 60 seconds) I would check to make sure this is the same value as you are seeing on your screen. Comin Home/Leaving Home with Fog and LED Select Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation (4) Comfort lighting Coming Home Lights Value :Nebellicht(Low Beam) Make sure you take a backup of your settings first and may be give this a try Omlouvám se, že nemohu být více pomoci |
|
|
|
Post by kbalboa on May 9, 2017 18:47:37 GMT
Hi...i just done to coding this option,but it doesn't work....Also,seems to do not work regularly the passenger windows and I mean the one-touch of the button(I try,also,to reset and calibrate this one but nothing)..Can you help me?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 9, 2017 20:53:11 GMT
Hi...i just done to coding this option,but it doesn't work....Also,seems to do not work regularly the passenger windows and I mean the one-touch of the button(I try,also,to reset and calibrate this one but nothing)..Can you help me? KBALBOA Hi, can you please give us a bit more detail. What Car and Year, What coding have you done please, Did you take any backups, When you say you have done some coding how did you do this by using the adaption or via one of the apps. Thanks |
|
|
|
Post by barone96 on May 9, 2017 20:57:51 GMT
Activate DRL without rain sensor
(DRL sinistra)
-Unità di controllo: 09 Centrale elettrica/elettronica
-Adattamento
-Leuchte2SL VLB10
-Lichtfunktion E 2: Vecchio valore: nicht aktiv Nuovo Valore: Innenlicht
-Lichtfunktion F 2: Vecchio valore: nicht aktiv Nuovo Valore: Parklicht links (beidseitiges Parklicht aktiviert li & re)
-Dimmwert EF 2: Vecchio valore: 0 Nuovo Valore: 26
-Unità* di controllo: 09 Centrale elettrica/elettronica
-Adattamento
-Leuchte4TFL LB4
-Lichtfunktion E 4: Vecchio valore: nicht aktiv Nuovo Valore: Innenlicht
-Lichtfunktion F 4: Vecchio valore: nicht aktiv Nuovo Valore: Parklicht links (beidseitiges Parklicht aktiviert li & re)
-Dimmwert EF 4: Vecchio valore: 0 Nuovo Valore: 127
(DRL destra)
-Unità* di controllo: 09 Centrale elettrica/elettronica
-Adattamento
-Leuchte3SL VRB21
-Lichtfunktion E 3: Vecchio valore: nicht aktiv Nuovo Valore: Innenlicht
-Lichtfunktion F 3: Vecchio valore: nicht aktiv Nuovo Valore: Parklicht rechts
-Dimmwert EF 3: Vecchio valore: 0 Nuovo Valore: 26
Unità* di controllo: 09 Centrale elettrica/elettronica
-Adattamento
-Leuchte5 TFL RB32
-Lichtfunktion E 5: Vecchio valore: nicht aktiv Nuovo Valore: Innenlicht
-Lichtfunktion F 5: Vecchio valore: nicht aktiv Nuovo Valore: Parklicht rechts
-Dimmwert EF 5: Vecchio valore: 0 Nuovo Valore: 127
|
|
|
|
Post by S2Frg on May 10, 2017 13:32:56 GMT
Hi
Trying to do the tail gate lights for brake lights option module 09, coded in as detailed but only my OS tailgate light comes on when braking NS doesn't come on, any ideas?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2017 21:55:00 GMT
Guys does anybody know if the following works on the Leon
Coding->
Control Unit-> Dashboard
Acceleration Display: set it to yes.
I have set it to Yes but have not seen anything different.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2017 22:01:41 GMT
Hi Trying to do the tail gate lights for brake lights option module 09, coded in as detailed but only my OS tailgate light comes on when braking NS doesn't come on, any ideas? S2Frg, are you LED or not and what coding have you used (or did you do it via app) |
|
|
|
Post by omck75 on May 16, 2017 3:18:16 GMT
Hallo.
In Sport Modus kommt geile Sound,kann man das codieren auch für alle Modi?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2017 12:36:23 GMT
Just seen this on www.seatcupra.net/forums/showthread.php?t=438279"btw don't follow the guide on the list of adaptions - these both make you trick sensors into disabling start stop - instead select module 1 engine and it is at the top of the list 'activation of start stop' and you can select 'not active'." |
|
brot
New Member
Posts: 8
|
Post by brot on May 28, 2017 9:45:41 GMT
How to set up the oil reset service for 30,000km, I'm only 15,000km via the application
Thank you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 28, 2017 15:28:47 GMT
Not sure about 2017 Models but for 5F Cars there is a Oil Service reset app and it only cost 10 credits (which is less that two days usage of the system).
From a Spanish site I have the following
with this mod you can reset the oil change notice.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - PIM: oil quality - (Change value to good quality oil)
I guess it changes the notification period, if you make the change and check service interval in the car menu you can see if it makes a difference.
Let me know if you need more.
|
|
|
|
Post by inowack on Jun 4, 2017 13:56:02 GMT
Hey all,
i have a question,
I have 2016 Leon FR with tech. pack, i've just coded carbon skin on infotainment (by long coding) and climate control fan speed on auto (by app), but in history for my car i've noticed that byte 1 for module 17 is changed when i connected obd11 to car even i didnt change anything.
old begining of module 17: 07A402202....
new begining of module 17: 07AC02002....
can anybody tell my what the second byte stands for? Is that readout for laptimer ackivation that i previously did few days ago via app?
Thanks in advance,
Ivan N
QA
|
|
|
|
Post by Bravo silva on Jul 2, 2017 18:27:53 GMT
Hello..after change VIM..lost hours in scren..now i dont have hours in standby...help please
|
|
|
|
Post by sickness on Jul 6, 2017 0:54:58 GMT
actually by mistake i was coding coming & leaving home and something went wrong while coding i removed a factory function which is while your headlights are on off position when you flash both low & high beam flashes but after this mistake when i flash only high beam flash. if there is a coding or steps to do it again i would appreciate it thanks in advance and here is a picture shows what i mean  |
|
|
|
Post by eddycupra on Jul 6, 2017 16:18:55 GMT
|
|
|
|
Post by theoldboy on Jul 11, 2017 11:43:22 GMT
|
|
|
|
Post by stepdey on Jul 18, 2017 11:28:36 GMT
Hi Trying to do the tail gate lights for brake lights option module 09, coded in as detailed but only my OS tailgate light comes on when braking NS doesn't come on, any ideas? Like to try to add this to mine ( led lights fitted ) What is the code please ? |
|
|
|
Post by stepdey on Jul 25, 2017 17:19:26 GMT
Hi Trying to do the tail gate lights for brake lights option module 09, coded in as detailed but only my OS tailgate light comes on when braking NS doesn't come on, any ideas? Like to try to add this to mine ( led lights fitted ) What is the code please ? Finally managed to implement this mod - but I found that because the light intensity is no more brighter than side lights being on, this mod only is evident during the day. But if you've got the rear lights on, this mod is pointless unless the rear tailgate lights can somehow be increased in intensity when braking. |
|
|
|
Post by supavij on Aug 10, 2017 16:46:07 GMT
Good day,
I have a Golf MK7 R , is there a way to enable VIM , I don't have mirror link on the car? |
|
|
|
Post by theoldboy on Aug 10, 2017 17:16:56 GMT
supavij you have raised this in the Seat Leon coding and Adaptions, try on the Golf version and hopefully somebody can help.
|
|
brot
New Member
Posts: 8
|
Post by brot on Aug 11, 2017 15:02:26 GMT
What kind of coding to unlock the ice stripes when unlocking. See video
Auto: without sensor
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 11, 2017 17:12:32 GMT
brot if I have read the comments correctly the coding in the video is below, it says you need vcds but you can use OBD11
+xDiL You need vcds to do this.
Under Access Control 2
Leuchte6abl lc5 lichtfunktion e6: coming home oder leaving home aktiv. (99% already like this).
Leuchte6abl lc5 dimmwert ef6: 127 -> 0.
Leuchte6abl lc5 dimming direction ef6: -> maximize to minimize.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 15, 2017 19:55:42 GMT
Was helping somebody out with the following coding and i am sure you are aware but for those that are not please read the bottom of the post.
Ambient door light with flashing and color change
With this mod, bringing the doors in red, when flashing, the door on the side of the indicator flashes between red and white.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Leuchte16BLK SLB35BLK SL KC9
4 - Submenu - Lichtfunktion C
5 - Change value to Blinken links (beide Phasen) BOTH SIDES OF INTERMITTENT or Blinken links (Hellphase) ONLY WITH INTERMITTENT LEFT
6 - Select - Leuchte16BLK SLB35BLK SL KC9
7 - Submenu - Dimmwert CD
8 - Change value to 0
9 - Select - Leuchte16BLK SLB35BLK SL KC9
10 - Submenu - Dimming direction CD
11 - Change value to Minimize
12 - Select - Leuchte16BLK SLB35BLK SL KC9
13 - Submenu - Lichtfunktion E
14 - Change value to Blinken rechts (beide Phasen) BOTH SIDES OF FLASHLIGHTS or Blinken rechts (Hellphase) ONLY WITH RIGHT INTERMITTENT
15 - Select - Leuchte16BLK SLB35BLK SL KC9
16 - Submenu - Dimmwert EF
17 - Change value to 0
18 - Select - Leuchte16BLK SLB35BLK SL KC9
19 - Submenu - Dimming direction EF
20 - Change value to Minimize
21 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
22 - Submenu - Lichtfunktion A
23 - Change value to Blinken links Hellphase
24 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
25 - Submenu - Lichtfunktion B
26 - Change value to Blinken rechts Hellphase
First thing I would point out (tested on 2014 car) is that a number of the submenu have different labels eg Lichtfunktion A was Lichtfunktion A17 but its obvious which one to use.
Leuchte16BLK SLB35BLK SL KC9 is the red light (0 = minimized and 127 = maximized) and Leuchte17TFL R BLK SRB3TFL R BLK SR KC3 is white light (0 = minimized and 127 = maximized)
Blinken links = Flashing left, Blinken rechts = Blink right
I tested it with the door open and it worked however when I closed the door I only got a flashing white on off. however when I turned the auto lights back on (turned off whilst i was coding with no engine running) then i got flashing between red and white.
Lastly this setup means that you don't get directional door lights instead when you select the indicator left or right you get both doors flashing. Still a nice effect but if you are expecting it only to appear on one side that is not what it does at this time.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2017 22:06:42 GMT
Stop the ECU killing the power when the wheels spin in 1st 2nd or 3rd- t hanks to Hurdy and Alex KerrOtherwise known as remove torque Limiter. In VCDS go to the ABS controller, select adaptations, select "starting vibration reduction" from the drop down menu, change the value to "Deactivated" In OBD11 on my 2014 Cupra this is Go to Control Unit 03 - Breaks Select Adaptions Select Starting vibration reduction: And change value to Deactivated (or normal)- Mine is currently set to Strong as Default. |
|
|
|
Post by maxitaly on Aug 20, 2017 21:00:09 GMT
Is there a way to have it on a menu?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2017 21:42:16 GMT
Maxitaly I presume you mean the torque limiter if so the answer is not that I am aware, I have only seen this as coding and if you look through the menu section of 5F information control unit I cant see anything obvious.
But that raise a thought which I will raise a request for, be nice to have a macro tool to allow you to build you own APPS then this type of change would be a one touch item.
|
|
eddie
Closed beta tester
Posts: 6
|
Post by eddie on Aug 28, 2017 13:31:11 GMT
Hi to all, I've a Seat Leon 5F 2014... is possible enable the maximum DRL FULL LED intensity also when the switch is on   |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 28, 2017 16:41:31 GMT
Eddie is this what you are after
Intensity lights DRL LED lights
With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Dimmwert CD 2
5 - Change the desired value. Default 26
6 - Select - Leuchte3SL VRB21
7 - Sub - Dimmwert CD 3
8 - Change to the desired value. Default 26
127 maximum allowed
|
|
