Here you go - sorry it's an image - couldn't get a table to format properly in this forum.
Module Type Setting Old New 5F Adaptation Dashboard display configuration -> ability_switch_nav_maps Off On 5F Adaptation Vehicle Configuration -> VZAPro Off On 5F Adaptation Vehicle Configuration -> online_street_view Off On 5F Adaptation Vehicle Configuration -> OPS_display_in_dash_board_display_unit Off On 09 Long Coding PLA_Parking_space_Selection hardkey softkey 09 Adaptation Show parking space Not activated Activated A5 Adaptation Visual display for park assist OPS display With OPS 360
All coding above didn’t actually do anything until
17 Long Coding Intelligent Park Assist ? On 44 Long Coding Parallel Parking Assistance ? On
A5 Long Coding ipa_intelligent_parking_assist Not activated activated A5 Long Coding FW_interface_parking_button Hard key Soft key A5 Long Coding IPA Curb Lifter Not activated activated A5 Long Coding FW_PLA_BCM Not activated activated A5 Adaptation Parking assistance fade in Not activated activated
09 Long Coding Pla activaton Hard key Soft key
This one caused issues.... 19 Adaptation Installed specified list -> Park Assistance Not installed Installed
I've backed it all out - but still got a databus error.... everything seems ok, but the ECU (1) and Front Assistance (A5) are showing the same error..... can't clear it, so not sure what's going on - it might clear itself after some time (had this before)
Which A7 do you have? - could you post your Gateway long-coding string please?
I have an A7 2018 (4k), I made all the modifications you told me, I have no error messages, I have the logo that appears on the bottom screen but when I press it, it tells me that the option is not available at the moment. how can i find my Gateway long-coding string?
Any progress on your Intelligent Parking Assist coding?
I have A6 C8. Made the quite similar coding according to your instructions (there was some differences). The same, software button appears in MMI, but when I press it, got message, that option is not available at the moment.
vwcalifornia2020: ok so odb11 does not work with 2020 models! if I had read this before I wouldn't have bought it !! not cool ! it is not specified on the website that it is until 2019 !! it is noted from 2016 -...
Aug 4, 2020 19:36:02 GMT
testeronline: just to be clear VAG have introduced new security on MQB Platform motors that all devices will need to deal with (VCDS, OBD11, caristaapp, VCP Etc) but they are all building the interface
Aug 4, 2020 19:43:38 GMT
testeronline: as VAG have been slow in passing info on to these tools. However I agree OBD11 Should be clear in what cars can fully use Coding and Which cars cant.
Aug 4, 2020 19:44:27 GMT
testeronline: I have already today told support that there web site is incorrect showing it can do stuff it cant (copy and paste error in my opinion)
Aug 4, 2020 19:45:00 GMT
testeronline: It works on Android (to scan) the SFD Issue is across all devices so will get sorted in time so its a bug raise issue with support via the Apple report bug
Aug 4, 2020 19:47:58 GMT
dermot: I have obdeleven & credits 215. Cannot start any changes due to grayed out check mark, will not except changes. I have all correct hardware. interested in the tail pop function on a VW Golf R.. Please help me..!
Aug 5, 2020 21:10:25 GMT
wolf: i have a 2002 audi a6 quattro 2.8l and it runs good but lately it wants to turn over but not start i replaced the cam position sensors and still have the problem any suggestions
Aug 6, 2020 1:31:15 GMT
wolf: no codes
Aug 6, 2020 1:32:33 GMT
b97: is there a list or manual of all codings with obd11?
Aug 6, 2020 8:45:35 GMT
dvs7biz: Wolf, check the Variable Valve Timing Control (N205) Valve. I had similar problem and replaced cam position sensor and crankshaft position sensor with no positive results. After breaking down engine it was the Variable Valve Timing Control (N205) Valve.
Aug 6, 2020 9:02:06 GMT