aju92
New Member
Posts: 1 
|
Post by aju92 on Sept 19, 2016 14:47:31 GMT
How can i recode control module VW polo 9n?
Control module incorrectly coded: fault code: 01044 (1044)
Coding:12364
What code do i use to recode?
I have obdeleven btw.
|
|
|
|
Post by OBDeleven on Oct 7, 2016 14:48:15 GMT
How can i recode control module VW polo 9n? Control module incorrectly coded: fault code: 01044 (1044) Coding:12364 What code do i use to recode? I have obdeleven btw. More data about control unit will be helpful, does this fault appears after you made some changes in coding? |
|
|
|
Post by igoro1975 on Dec 13, 2016 8:02:47 GMT
How can i recode control module VW polo 9n? Control module incorrectly coded: fault code: 01044 (1044) Coding:12364 What code do i use to recode? I have obdeleven btw. More data about control unit will be helpful, does this fault appears after you made some changes in coding? I have the same issue after I changed the items that will be tested during the scanning. Hope the info can be helpful: 19 Gateway System description: GW-K-CAN TP20 Software number: 6N0909901 Software version: 0254 Hardware number: 6R0937087 Hardware version: H46 Long coding: 022200 Trouble codes: 01044 - Control module incorrectly coded static Measurements: 4.3 °v.OT Frequency counter: 1 Mileage: 113753 km Driving cycle: 255 Priority: 2 |
|
garth
New Member
Posts: 2
|
Post by garth on Jul 18, 2017 8:53:52 GMT
Hi, has anyone had any solution to the 01044 fault coded?
I have found the similar problem in three 9n vw polo's, with just trying to reset the air bag warning indicator.
The indicator light came on after cranking the engine with a flat battery, and after a battery change.
No coding changes was done, can anyone shed some light on this issue please?
OBDeleven data log
Date: 2017-07-15 10:51
VIN: AAVZZZ9NZ7U054619
Car: Volkswagen Polo
Year: 2007
Body type: 5-dr hatchback
Mileage: 157910 KM
15 Airbag
System description: 05 AIRBAG VW5 0010
Software number: 6Q0909601F
Coding: 12341
Trouble codes:
00532 - Supply voltage Signal too low
Intermittent
01044 - Control module incorrectly coded
Intermittent
|
|
|
|
Post by vwrobot on May 30, 2018 14:09:32 GMT
|
|
|
|
Post by twistyone on Jul 3, 2019 12:38:58 GMT
I have the same warning mate I don't think I would worry about it to me I think it's problems with the battery itself not giving enough voltage I plan to replace my battery because it does definitely show problems glad you're getting something done this thing makes me feel stupid I can't even get into the security code tried and tried so many numbers can't get anywhere I think another month and I'm going to shoot this dongle with an AK-47
|
|
|
|
Post by twistyone on Jul 3, 2019 12:39:53 GMT
Ignore that one wrong code
|
|
