|
|
Post by kees030 on Oct 23, 2018 18:16:02 GMT
I can find only few coding and adaptations for my Seat Arona with OBDeleven PRO. Auto folding mirrors worked, however I'd like to unfold mirrors not every time I unlock the car; only when ignition is on.
Also I'd like to do mirror dip, activate alarm, rain close and needle swipe with Virtual Cockpit (for a start).
Please point to where to find it. Or can I use Ibiza KJ coding for my Arona without problems?
|
|
|
|
Post by kees030 on Dec 26, 2018 22:44:35 GMT
Views 231; replies 0 :-(
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2018 23:05:44 GMT
KEES030 i suspect this is because the Arona is not as well sold as the Leon and Ibiza so coding tips are much less.
Let us know how you get on and maybe share what you find
|
|
|
|
Post by juanacho21 on Feb 21, 2019 18:51:33 GMT
Actívate alarma. forosdecoches.com/clubseatarona/Hilo-Codificando-nuestro-Arona-con-OBDeleven?page=3Módulo 09 - Electronic control unit - Validation code (31347). Go to Adaptation. Select Diebstahlschutz Within that selection we change the following parameters:: - Select anti_theft_alarm_system change to active (by default it is inactive) - Select Akustischer_Alarm_Signalhorn Chango to active (by default it is inactive) - Select DWA_Alarwerzoegerung Change to "delay_driver_door_contact_thatcham" (by default "delay_driver_door_lock_cylinder_skoda") - Select Diebstahlschutz_mit_Anhaenger y cambiamos a activo (by default it is inactive) - We press the green check about 2/3 seconds and validate with the code 31347. This coding is not mine I have taken from the forum that I have put up the link. It is tested and works perfectly. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 21, 2020 12:52:56 GMT
josephkalel please post up your change history so that we can see what changes you have made.
|
|
quickalex973
New Member
https://www.instagram.com/alextrem.design/
Posts: 27
|
Post by quickalex973 on Jul 19, 2020 22:14:18 GMT
|
|
|
|
Post by josephkalel on Apr 19, 2021 4:36:24 GMT
josephkalel please post up your change history so that we can see what changes you have made. From which module? Or I’ll do a full back up and upload it here ? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 19, 2021 4:59:16 GMT
My reply was from 2020 but your issue you need help with is no longer showing.
If you explain what problem you were having and post up a full history I will try and help.
|
|
|
|
Post by josephkalel on Apr 26, 2021 23:59:50 GMT
Until now is everything fine Mate thank you.
The issue I was having was with the tails for the Urban Joke but now it’s done with the 1 click app I requested.
The only thing I have issue now is with the retrofit of my front LED headlights Just get work the white DRL and the Low Beams but together not separated So i guess is an electric issue with the cables I need the special harness bridge to connect them properly tried and tried coding but nothing makes the Yellow color and the high beams to work
|
|
