|
|
Dv52
Oct 15, 2023 15:40:03 GMT
Post by ruinalin22 on Oct 15, 2023 15:40:03 GMT
|
|
|
|
Dv52
Oct 15, 2023 15:41:13 GMT
Post by ruinalin22 on Oct 15, 2023 15:41:13 GMT
Dv52 good afternoon, I would like to know if these features listed there, would work on my Passat b8 MQB HL TSI 2018?.
|
|
|
|
Dv52
Oct 15, 2023 21:28:29 GMT
Post by dv52 (Australia) on Oct 15, 2023 21:28:29 GMT
ruinalin22: hmm....... I first posted the table in your picture 10 years ago on my local forum ( HERE) for a first generation mk7 Golf. I've not tried the tweak on Passat B8.
I suggest that you try and if the tweak doesn't work - revert the values back
Don
|
|
|
|
Dv52
Oct 15, 2023 22:12:42 GMT
via mobile
Post by ruinalin22 on Oct 15, 2023 22:12:42 GMT
Dv52 I enabled the first option and it worked perfectly, only problem is that when I give left or right arrow, the break light also flashes together.
|
|
|
|
Dv52
Oct 15, 2023 23:36:48 GMT
Post by dv52 (Australia) on Oct 15, 2023 23:36:48 GMT
ruinalin22 : Post-up screenshots of the Leuchte-set so I can see the values . To be clear, your pictures needs to show ALL 19 x adaptation channels Don
|
|
|
|
Dv52
Oct 16, 2023 0:11:31 GMT
Post by ruinalin22 on Oct 16, 2023 0:11:31 GMT
|
|
|
|
Dv52
Oct 16, 2023 0:12:08 GMT
Post by ruinalin22 on Oct 16, 2023 0:12:08 GMT
There's Don
|
|
|
|
Dv52
Oct 16, 2023 1:04:42 GMT
Post by ruinalin22 on Oct 16, 2023 1:04:42 GMT
|
|
|
|
Dv52
Oct 16, 2023 21:29:27 GMT
Post by dv52 (Australia) on Oct 16, 2023 21:29:27 GMT
yes-coding looks OK. I guess the tweak doesn't work on a Passat B8 (alas)
Don
|
|
|
|
Dv52
Oct 16, 2023 22:48:54 GMT
via mobile
Post by ruinalin22 on Oct 16, 2023 22:48:54 GMT
Don, thank you for your attention, I'll keep it anyway, even if I flash the breake light, in Brazil it's not prohibited, and this is safer, because when I'm going to enter my garage, rear drivers are more attentive when I give the turn signal and the bkeake light flashes too 👍🏻
|
|
|
|
Dv52
Oct 17, 2023 12:44:10 GMT
via mobile
Post by ruinalin22 on Oct 17, 2023 12:44:10 GMT
Don good morning, is there a way for me to enable the Leuchte16BLK SLB35BLK
SL KC9 and 17, to flash along with the Leuchte 18 and 19, when I give a left or right arrow?.
|
|
|
|
Dv52
Oct 17, 2023 13:26:53 GMT
Post by ruinalin22 on Oct 17, 2023 13:26:53 GMT
|
|
|
|
Dv52
Oct 17, 2023 21:08:44 GMT
Post by dv52 (Australia) on Oct 17, 2023 21:08:44 GMT
ruinalin22 : hmmm.........the settings in your screenshots don't make sense (to me at least)!
As currently programmed, the light that is controlled by this Leuchte-set is fully illuminated both when the lamp operates as a Brake-light and when it operates as a Parking-light (PL) -you might call this "position-light". This means that after dark when the low-beam lights are switched-ON, drivers at the rear of this car can't tell when the brake pedal is pressed (because this lamp is already fully illuminated)!!
I'm not sure how the actual brake-light lamps (i.e. the outer lamps on the tail-light fittings) operate - but the current arrangement on these tail-lights must be very confusing for drivers at the rear of this car!! I have absolutely no knowledge about the road rules in Brazil - but the set-up for the tail-lights can't possibly. be legal!!
The other problem with the current programming of this Leuchte-set is that the Single Side Parking-Light (SSPL) function is also set to full illumination. This means that when the driver enables SSPL (i.e. the turn-signal lever is activated when the ignition is turned-OFF and the car is locked)- the car battery drain is the full lamp wattage (i.e. 21W for an incandescent tail-light lamp) - this ain't good for the battery because this current drain can be sustained for a long time
Again, I'm not sure why the Leuchte-set is programmed this way - but the factory method that is used when a lamp has both Brake and PL function is that the PL illumination is dimmed. Drivers at the rear of the car can tell when the Brake pedal is pressed because the lamp illumination increases. Also, the lamp is dimmed for SSPL so that battery drain is reduced
I've embedded this dimming principle into my suggestion below
Leuchte16BLK SLB35BLK SL KC9 Lasttyp 16 > 14 - kombinierte Blink- Bremsleuchten Lampendefektbitposition 16 > No change Fehlerort mittleres Byte DTC-DFCC 16 > No change Lichtfunktion A 16 > Bremslicht Lichtfunktion B 16 > Blinken links Hellphase Dimmwert AB 16 > 100 Lichtansteuerung HD AB 16 > Always Lichtfunktion C 16 > Blinken links Dunkelphase Lichtfunktion D 16 > nicht aktiv Dimmwert CD 16 > 0 Dimming Direction CD 16 > minimize Lichtfunktion E 16 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Lichtfunktion F 16 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Dimmwert EF 16 > 28 Dimming Direction EF 16 > maximize Lichtfunktion G 16 > nicht aktiv Lichtfunktion H 16 > nicht aktiv Dimmwert GH 16 > 0 Dimming Direction GH 16 > maximize Leuchte17TFL R BLK SRB3TFL R BLK SR KC3 Lasttyp 17 > 14 - kombinierte Blink- Bremsleuchten Lampendefektbitposition 17 > No change Fehlerort mittleres Byte DTC-DFCC 17 > No change Lichtfunktion A 17 > Bremslicht Lichtfunktion B 17 > Blinken rechts Hellphase Dimmwert AB 17 > 100 Lichtansteuerung HD AB 17 > Always Lichtfunktion C 17 > Blinken rechts Dunkelphase Lichtfunktion D 17 > nicht aktiv Dimmwert CD 17 > 0 Dimming Direction CD 17 > minimize Lichtfunktion E 17 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Lichtfunktion F 17 > Parking light right Dimmwert EF 17 > 28 Dimming Direction EF 17 > maximize Lichtfunktion G 17 > nicht aktiv Lichtfunktion H 17 > nicht aktiv Dimmwert GH 17 > 0 Dimming Direction GH 17 > maximize
Don
|
|
|
|
Dv52
Oct 18, 2023 11:27:18 GMT
via mobile
Post by ruinalin22 on Oct 18, 2023 11:27:18 GMT
Don regarding what you said to the Single Parking-Light (SSPL) that is wrong, in which Leuchte setting is this so that I understand and learn?, I don't know if this occurred because I have enabled the Scandinavia lights feature through the one-click obdeleven for this, because here in Brazil this is allowed, The rear lights can also be switched on during the day along with the front daylight lights. Really if I leave the turn signal lever on and turn off the car and lock it, the lights corresponding to the side I turned on the turn signal, remain on and a warning appears on the display and another audible one that I need to turn off the arrow. Is this setting you sent going to solve that?.
|
|
|
|
Dv52
Oct 18, 2023 12:29:33 GMT
Post by ruinalin22 on Oct 18, 2023 12:29:33 GMT
|
|
|
|
Dv52
Oct 18, 2023 20:40:53 GMT
Post by ruinalin22 on Oct 18, 2023 20:40:53 GMT
|
|
|
|
Post by dv52 (Australia) on Oct 19, 2023 21:51:37 GMT
The message if the turn-signal stalk is left activated while exiting the vehicle is normal. It's a warning to the driver that SSPL function will be enabled -meaning that an electrical drain will be applied to the battery whilst the alternator is not operating. The warning message should clear after the driver door is closed, or the when car is locked. My suggested change won't alter this warning message. My suggested changes will dim the PL function on the tail-lights to 28% so that drivers at the rear of the car can distinguish when the Brake pedal is pressed. This is the default arrangement as factory set (i.e. the Brake-light lamps are the ONLY lamps that are fully illuminated on the tail-light fitting) The Leuchte-command for the PL function is Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Don
|
|
|
|
Dv52
Oct 20, 2023 13:06:36 GMT
via mobile
Post by ruinalin22 on Oct 20, 2023 13:06:36 GMT
Don, the leds indicating the brakes of my car, are none of those shown in the photo above, they appear vertically in the taillight of the photo separately from the rest already lit as in the photo above. There are three bars on each side vertically that light up very strongly, standing out very well in brightness.
|
|
|
|
Dv52
Oct 22, 2023 14:14:03 GMT
via mobile
Post by ruinalin22 on Oct 22, 2023 14:14:03 GMT
Don good morning, Don have to enable the two internal leds to work together when I blink left or right?, today only the external one works, I would like the internal one as it is in the photo above, to also blink together, or to alternate between them when I gave the blink command.
|
|
|
|
Dv52
Oct 22, 2023 23:21:03 GMT
Post by dv52 (Australia) on Oct 22, 2023 23:21:03 GMT
I'm not quite sure what you mean! If you want the internal lamp to work like the external lamp - simply code the internal lamp the same as the external lamp!
Don
|
|
|
|
Dv52
Oct 23, 2023 19:47:19 GMT
via mobile
Post by ruinalin22 on Oct 23, 2023 19:47:19 GMT
Don, my turn signals have two separate LED bars on each side, one internal and one external separated from the comfort LEDs like in my photo that I sent above my car. What would you like these inner and outer taillight bars to flash together when you turn signal.
|
|
|
|
Dv52
Oct 23, 2023 19:49:48 GMT
via mobile
Post by ruinalin22 on Oct 23, 2023 19:49:48 GMT
In this case, it would be Luuchte 16,17,18 and 19?.
|
|
|
|
Dv52
Oct 23, 2023 19:53:17 GMT
via mobile
Post by ruinalin22 on Oct 23, 2023 19:53:17 GMT
I mean, I'd like to do it. Sorry the broker 👍🏻
|
|
|
|
Post by dv52 (Australia) on Oct 23, 2023 21:20:26 GMT
I'm not sure how the Leuchte-sets are assigned on a Passat B8 - on a Golf mk7/7.5, the turn signal Leucht-sets on LED tail-lights are 18 & 19 (outer) and 16 &17 (inner) You should be able to confirm the correct Leuchte-sets because they will have the command Blinken rechts/links Hellphase on one of the Lichtfunktion channels
Don
|
|
|
|
Dv52
Oct 23, 2023 22:39:31 GMT
Post by ruinalin22 on Oct 23, 2023 22:39:31 GMT
|
|
|
|
Dv52
Oct 23, 2023 22:40:37 GMT
Post by ruinalin22 on Oct 23, 2023 22:40:37 GMT
It's like this in my car.
|
|
|
|
Dv52
Oct 23, 2023 22:49:09 GMT
Post by dv52 (Australia) on Oct 23, 2023 22:49:09 GMT
OK - Leuchte 19 (right-side) and Leuchte 18 (left-side) are the turn-signal lamps in your pictures !
copy Leuchte 16 onto Leuchte 18 and Leuchte 17 onto Leuchte 19
Don |
|
|
|
Dv52
Oct 24, 2023 1:40:44 GMT
via mobile
Post by ruinalin22 on Oct 24, 2023 1:40:44 GMT
Don, unfortunately it didn't work, I copied the parameters from 18 to 16, and from 19 to 17. It became a mess, I initially changed only the 16 to the same as the 18 and tested, it flashed the left external flasher and the left external flashlight on the right side together. I had to go back to what it was.
|
|
|
|
Dv52
Oct 24, 2023 12:17:52 GMT
Post by ruinalin22 on Oct 24, 2023 12:17:52 GMT
|
|
|
|
Dv52
Oct 24, 2023 12:20:52 GMT
Post by ruinalin22 on Oct 24, 2023 12:20:52 GMT
Don good morning, I would like to enable this external light in the photo so that it flashes together with the Leuchte 18, or blinks alternately between the 18 and the external one as it is in the photo, is this possible?.
|
|
