|
|
Dv52
Sept 1, 2023 12:30:59 GMT
via mobile
Post by ruinalin22 on Sept 1, 2023 12:30:59 GMT
Dv52, good night, how to enable the fog lights to operate together with the low beams when in automatic or on the headlights. Today it only works in high light, I would like that as soon as I turn on the headlights or they turn on automatically, the fog lights turn on together. My car is Passat HL b8 MQB 2018 Sedan.
|
|
|
|
Dv52
Sept 14, 2023 6:11:41 GMT
Post by sprucepassatb8 on Sept 14, 2023 6:11:41 GMT
I think u need to activate them with an extra lightfunction. Go to -> STG 09 (Central Electric) -> Login 31347 --> Adaption
---> Leuchte12NL LB45 (Foglight Left) ---> Lightfunction C from "not active" to "Abblendlicht links" ---> Dimmwert CD from "0" to "127" ---> Dimming Direction "maximize" ----> Leuchte13NL RB45 (Foglight Right) ----> Lightfunction C from "not active" to "Abblendlicht rechts" ----> Dimmwert CD from "0" to "127" ----> Dimming Direction "maximize" That should it be. If it doesnt work, reply or send me PM.  |
|
|
|
Post by ruinalin22 on Sept 14, 2023 12:04:55 GMT
Dv52, worked perfectly, thank you very much 🙏🏻
|
|
|
|
Dv52
Sept 14, 2023 13:36:33 GMT
via mobile
Post by ruinalin22 on Sept 14, 2023 13:36:33 GMT
Dv52, I left with 100 and not 125, do you have any problems?.
Dimmwert CD 12 100
|
|
|
|
Dv52
Sept 15, 2023 6:38:41 GMT
Post by sprucepassatb8 on Sept 15, 2023 6:38:41 GMT
Dv52, worked perfectly, thank you very much 🙏🏻 Dv52, I left with 100 and not 125, do you have any problems?. Dimmwert CD 12 100 There should be no problem. LED full brightness is 127, with 100 they're bit "darker". I dont think u can see the difference between them. |
|
|
|
Dv52
Sept 15, 2023 11:35:05 GMT
via mobile
Post by ruinalin22 on Sept 15, 2023 11:35:05 GMT
My car in the fog lights are allogeneic, can I keep at 100 or should I leave at 125?, already the high and low headlights are in Leds.
|
|
|
|
Dv52
Sept 15, 2023 11:42:51 GMT
Post by sprucepassatb8 on Sept 15, 2023 11:42:51 GMT
Leave it as it is. Everything should work properly.
|
|
|
|
Dv52
Sept 15, 2023 12:04:36 GMT
via mobile
Post by ruinalin22 on Sept 15, 2023 12:04:36 GMT
Thank you very much 🙏🏻
|
|
|
|
Dv52
Sept 17, 2023 2:32:57 GMT
via mobile
Post by ruinalin22 on Sept 17, 2023 2:32:57 GMT
Dv52, has how to leave the rear LED direction signals of the Passat Sedan HL 2.0 2018 MQB dynamic, or alternated with the external LEDs of the taillight?.
|
|
|
|
Dv52
Sept 28, 2023 1:26:20 GMT
via mobile
Post by ruinalin22 on Sept 28, 2023 1:26:20 GMT
Dv52, worked perfectly, thank you very much 🙏🏻 Dv52, I left with 100 and not 125, do you have any problems?. Dimmwert CD 12 100 There should be no problem. LED full brightness is 127, with 100 they're bit "darker". I dont think u can see the difference between them. |
|
|
|
Dv52
Sept 29, 2023 0:22:00 GMT
via mobile
Post by ruinalin22 on Sept 29, 2023 0:22:00 GMT
What I would like, is that led of the rear blinkers, alternate with the external leds when I give arrow to left or right. Dv52, would it be possible for you to pass me how to do this in my Passat b8 HL TSI 2.0 2018 Sedan ?.
|
|
|
|
Dv52
Sept 29, 2023 3:26:27 GMT
Post by dv52 (Australia) on Sept 29, 2023 3:26:27 GMT
ruinalin22 Do this: - ONLY if Leuchte18BLK HLA60-Lichtfunktion E 18 = Blinken links Hellphase, change to Blinken links Dunkelphase
- ONLY if Leuchte19BLK HRC31-Lichtfunktion E 19 = Blinken rechts Hellphase, change to Blinken rechts Dunkelphase
Don
|
|
|
|
Dv52
Sept 29, 2023 17:42:18 GMT
via mobile
Post by ruinalin22 on Sept 29, 2023 17:42:18 GMT
On Leuchte18BLK HLA60, Linchfunktion E 18, on my car it is selected: Nicht aktiv. Can I use the change to: Blinken links Dunkelphase on my Passat?. This is also for the Leuchte19BLK HRC31-Lichtfunktion E 19, which is in Nicht aktiv for: Blonken rechts Dunkelphase?.
|
|
|
|
Post by dv52 (Australia) on Sept 29, 2023 20:32:43 GMT
ruinalin22 : hmm.......... because there are so many different options for light-fittings on a Passat - there are also lots of different ways that the Leuchte-sets can be factory coded. My instructions above were a bit of a guess based on a central electrics module in my database. But clearly your car is not the same - what country is this?
The best way forward is to post-up screenshots of one of the Leuchte-sets in my first post (doesn't matter which one). To be clear, I need to see ALL 19 x channels in your pictures
Don
|
|
|
|
Dv52
Sept 29, 2023 21:24:08 GMT
Post by ruinalin22 on Sept 29, 2023 21:24:08 GMT
ruinalin22 : hmm.......... because there are so many different options for light-fittings on a Passat - there are also lots of different ways that the Leuchte-sets can be factory coded. My instructions above were a bit of a guess based on a central electrics module in my database. But clearly your car is not the same - what country is this?
The best way forward is to post-up screenshots of one of the Leuchte-sets in my first post (doesn't matter which one). To be clear, I need to see ALL 19 x channels in your pictures
Don
   |
|
|
|
Dv52
Sept 30, 2023 1:24:22 GMT
Post by dv52 (Australia) on Sept 30, 2023 1:24:22 GMT
ruinalin22 : OK - thanks for the screenshots! Try this:
- Leuchte18BLK HLA60-Lichtfunktion A 18 change Blinken links Hellphase to Blinken links Dunkelphase
- Leuchte19BLK HRC31-Lichtfunktion A 19 change Blinken rechts Hellphase to Blinken rechts Dunkelphase
Don
|
|
|
|
Dv52
Sept 30, 2023 17:26:28 GMT
via mobile
Post by ruinalin22 on Sept 30, 2023 17:26:28 GMT
Does this configuration work that passed?, because I am with rear lights like Scandinavian, that is, are all the time the external LEDs connected. So, will it switch with the internals after this configuration you went through?.
|
|
|
|
Dv52
Oct 1, 2023 14:45:36 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 14:45:36 GMT
|
|
|
|
Dv52
Oct 1, 2023 14:48:28 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 14:48:28 GMT
Good morning DV52, think that if you do this setting on the flashers to stay on all the time, can not decrease the life of the leds of the flashers?.
|
|
|
|
Dv52
Oct 1, 2023 22:59:13 GMT
Post by dv52 (Australia) on Oct 1, 2023 22:59:13 GMT
ruinalin22 : When you say "Does this configuration work that passed?" - are you asking if my suggestion has been tested? If so, the answer is NO!. As for your question about "decrease the life of the LEDs of the flashers" - my suggestion does NOT turn-ON the flashers all the time. My changes will only make the fashers "counter-blink" with the other turn-signal lamps - which was what you requested in your post
Don
|
|
|
|
Dv52
Oct 1, 2023 23:22:05 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 23:22:05 GMT
Okay, thanks for the clarifications.
|
|
|
|
Dv52
Oct 1, 2023 23:27:02 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 23:27:02 GMT
Does this configuration work that passed?, because I am with rear lights like Scandinavian, that is, are all the time the external LEDs connected. So, will it switch with the internals after this configuration you went through?.
|
|
|
|
Dv52
Oct 1, 2023 23:29:02 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 23:29:02 GMT
Try this:
Leuchte18BLK HLA60-Lichtfunktion A 18 change Blinken links Hellphase to Blinken links Dunkelphase
Leuchte19BLK HRC31-Lichtfunktion A 19 change Blinken rechts Hellphase to Blinken rechts Dunkelphase
Don
|
|
|
|
Dv52
Oct 1, 2023 23:29:38 GMT
via mobile
Post by ruinalin22 on Oct 1, 2023 23:29:38 GMT
I say this one has passed.
|
|
|
|
Dv52
Oct 6, 2023 16:29:47 GMT
via mobile
Post by ruinalin22 on Oct 6, 2023 16:29:47 GMT
DV52, does this setting work on my Pass?.
|
|
|
|
Post by dv52 (Australia) on Oct 6, 2023 21:05:29 GMT
ruinalin22: I'm not sure what you are trying to do! Does this car have AUTO HOLD installed? Don
|
|
|
|
Dv52
Oct 6, 2023 21:17:38 GMT
via mobile
Post by ruinalin22 on Oct 6, 2023 21:17:38 GMT
Yes, my car has Auto Hold installed, but it is not in the car's menu, I would like to know if I do this procedure in this video it will appear in the menu.
|
|
|
|
Dv52
Oct 6, 2023 21:18:54 GMT
via mobile
Post by ruinalin22 on Oct 6, 2023 21:18:54 GMT
Or is there no need for it?.
|
|
|
|
Post by dv52 (Australia) on Oct 8, 2023 0:46:29 GMT
hmm...... you can always experiment and try the tweak (I've not done this tweak) - but if the car already has AUTO hold, then it will have the ON/OFF switch for the function. AFAIK, the MENU facility simply replicates the button function (I think it is intended for those cars that don't have the physical AUTO hold switch)
Don
|
|
|
|
Dv52
Oct 8, 2023 4:11:10 GMT
via mobile
Post by ruinalin22 on Oct 8, 2023 4:11:10 GMT
Ah, ok, I think that's my case, as I have the physical switch in my car, this doesn't work, I tried it but it didn't appear in the menu, I went back to what it was. Thank you 👍🏻
|
|
