|
|
Post by joebarber27 on Apr 10, 2018 16:02:14 GMT
Is there any way to have the White DRL's turned to Orange Like "UsSpec" on other Vws (Mk5 Golf)?  Thanks |
|
riel
New Member
Posts: 1
|
Post by riel on Apr 11, 2018 9:35:22 GMT
Is there a way where i can get the front indicators to stay on with the DRL and headlights, and still blink when I turn?
|
|
|
|
Post by vwjap on Apr 13, 2018 18:04:47 GMT
Int. light, 2nd generation: weicher Farbwechsel: active
soft colour change-not needed
Int. light, 2nd generation: Instrumententafelbeleuchtung mehrfarbig: active
AID colour- needed
Int. light, 2nd generation: Mittelkonsolenbeleuchtung mehrfarbig: active
center console colour-not needed
Interior light, light configuration: Ambiente_Applikationsleisten_in_Instrumententafel: installed
needed
Interior light, light configuration: Mittelkonsolenbeleuchtung: installed
again Center console- not needed unless you have led in the Center console
Interior light, light configuration: LIN-Dachkonsole lokal aktivierbar: active
roof consol- not needed unless you have LED’s in the roof
Interior light, light configuration: Fussraumbeleuchtung is to enable footwell lights
Interior light, light configuration: Ambientemenue mit globalem aus: active
gives you a off button in background lighting to switch off door and footwell lighting
Interior light, light configuration: Ambientemenue mit alle Zonen: active
Adds the “background lighting” buttons in settings- needed
Interior light, light configuration: Ambient_Farbliste_HMI: active
gives you the colour slider at bottom of background lighting screen- needed
Interior light, light configuration: Frei_Farbwahl_ueber_HMI: active
Turns off the brightness slider in the background settings screen, so not active if you wanna dim the footwell door lights
|
|
|
|
Post by sootchucker on Apr 16, 2018 12:47:37 GMT
Does anyone know if it's possible to activate two rear Fog light on the FL cars fitted with the Dynamic rear LED lights (e.g. GTI) ?
|
|
|
|
Post by cioce on Apr 16, 2018 13:09:18 GMT
Does anyone know if it's possible to activate two rear Fog light on the FL cars fitted with the Dynamic rear LED lights (e.g. GTI) ? The fourth cable for the second rear fog light is not physically connected in my Golf 7 Restyling TGI business but I don't have the Dynamic rear LEDs. I did't have the time to test if leds are present inside the second rear light, but is easy to open the plastic light cover inside the trunk and see the two connectors. Where rear fog light is present I see 4 cables (negative ground pole -, tail light +, white reverse gear + and fog light +), on the other side I see only 3 cables, I think Dynamic rear LEDs have one more cable on both side for the inner indicators, so 5 and 4. If fog leds are present inside the second rear light it's only necessary to pull a new cable from one connector to the other. |
|
|
|
Post by wph5939 on Apr 22, 2018 5:19:56 GMT
|
|
|
|
Post by vwjap on Apr 22, 2018 7:38:18 GMT
|
|
|
|
Post by maxx99 on Apr 23, 2018 9:29:55 GMT
I have been searching around in ODB11 but can't seem to find following 2 settings :
1. Mirror fold speed treshold : The mirrors can be folded manually up until 50 km/h, which is quite bothersome. I would like to raise this limit.
2. Enable coasting : on my Caddy with DSG I have the option in the MFA to enable coasting (shift to neutral). Can I enable this optin in the Disco.Pro somewhere ? I don't have Driver Profile Selection (on the caddy neither btw).
|
|
|
|
Post by awdwagon on Apr 24, 2018 14:04:50 GMT
Comfort turn signals Control Unit 9 Adaptation Channel Aussenlicht_Blinker Komfortblinken Blinkzyklen - standard 3 I've set value to 4 reset "Light" to factory settings on head unit Didn't work on my FL 2018: OBD11 has grayed out 0-3, on the input screen. See below 
Screenshot_2018-03-10-13-40-01 by AWDWAGON, on Flickr |
|
|
|
Post by awdwagon on Apr 24, 2018 14:12:40 GMT
New FL (face-lifted) '18 with LP (US/CANADA), is it possible to have the front orange turn signal to blink alone __/__/ instead of both __/__/ and keep three LED ON with White color and only one LED flashing with orange?
\__\__===o===__/__/ <-- only this one blinks (same for other side)
|
|
|
|
Post by vwjap on Apr 24, 2018 14:20:43 GMT
Comfort turn signals Control Unit 9 Adaptation Channel Aussenlicht_Blinker Komfortblinken Blinkzyklen - standard 3 I've set value to 4 reset "Light" to factory settings on head unit Didn't work on my FL 2018: OBD11 has grayed out 0-3, on the input screen. See below
Screenshot_2018-03-10-13-40-01 by AWDWAGON, on Flickr did you try 4 or 5? Works on my facelift The grey out is only pattern, it should go black once you type a number in it, REMEMBER ONCE YOUVE DONE THIS MOD RESET THE LIGHT TO FACTORY SETTINGS ON MMI otherwise it will still blink 3 |
|
|
|
Post by grubsflow on Apr 24, 2018 16:20:17 GMT
did you try 4 or 5? Works on my facelift The grey out is only pattern, it should go black once you type a number in it, REMEMBER ONCE YOUVE DONE THIS MOD RESET THE LIGHT TO FACTORY SETTINGS ON MMI otherwise it will still blink 3 My 2017 non-FL but with the FL adaptation structure worked fine. I also got the grayed out "0-3" but entered 4, confirmed, and reset the lights on the HU. Worked like a charm. |
|
|
|
Post by awdwagon on Apr 25, 2018 2:26:41 GMT
|
|
|
|
Post by vwjap on Apr 25, 2018 7:12:07 GMT
Have you tried clearing the app data on the android?
|
|
|
|
Post by awdwagon on Apr 25, 2018 20:59:40 GMT
Have you tried clearing the app data on the android? Cleared the cache and it worked. Thanks 👍 |
|
|
|
Post by lovic87 on Apr 28, 2018 1:39:24 GMT
So I've managed to keep my DRLs at full brightness with the fogs on in coming home mode, but that's it. I do have some notes made on what plug and pins are for the blinker and DRL though, so that's some progress I suppose
|
|
|
|
Post by daveeu on May 17, 2018 5:39:27 GMT
I get "function not available" red box, whether it's 4 or 5 blinks 
Screenshot_2018-04-24-22-06-17 by AWDWAGON, on Flickr Wich version do you have exactly ? My 7.5 FL 5 door Comfortline shows 0 to 5 as possible option |
|
|
|
Post by vwjap on May 17, 2018 7:06:29 GMT
I think you’ll find he sorted it, obdeleven have a hissy fit and he cleared the data/cadge and that done it
|
|
|
|
Post by vwjap on May 17, 2018 20:15:30 GMT
Radio station logo and album art in the AID with a descover media (not pro as already enabled)
Under 5f
Dashboard_Display_Configuration:
coverart:
On
stationart:
On
|
|
|
|
Post by kopter28 on May 18, 2018 20:54:45 GMT
Radio station logo and album art in the AID with a descover media (not pro as already enabled) Under 5f Dashboard_Display_Configuration: coverart: On stationart: On Should also add that you need to reboot the infotainment for the changes to take effect. |
|
rolf
New Member
Posts: 4
|
Post by rolf on May 29, 2018 18:48:44 GMT
Has anyone figured out how to disable the new safety warning screen that appears when you try to access settings while moving?
|
|
|
|
Post by vwjap on May 29, 2018 22:33:58 GMT
I get no warnings,
But all my locked menu contents are set to non blocked
|
|
rolf
New Member
Posts: 4
|
Post by rolf on May 30, 2018 16:48:57 GMT
I get no warnings, But all my locked menu contents are set to non blocked Sorry, I don’t understand what you mean by “locked menu content” |
|
|
|
Post by vwjap on May 30, 2018 17:00:12 GMT
Under module 5F
Locked menu contents:
FB_TUNER_0:
non_blocked
Followed by a big list
|
|
|
|
Post by andreamap on Jun 6, 2018 18:40:43 GMT
How can I get the map showing both on AID and on Discover Media display? like the discover pro does
|
|
|
|
Post by vwjap on Jun 6, 2018 19:44:23 GMT
I don’t think the discover media has enough power to do that, it’s one or the other I’m afraid
|
|
hydro
New Member
Posts: 1
|
Post by hydro on Jun 8, 2018 18:13:19 GMT
Permanent driving mode engine assistance selection (for those who don't have the driving profile button and wants sport mode)
Control Unit 44 - Steering Assistance
Adaptation
Characteristic curve of steering assistance
Default = normal
Comfort = eco
Dynamic = sport
Automatic = ? (Never tried)
Driving profile selection button = normal - switch with button - default value
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 8, 2018 18:56:31 GMT
hydro, on my coding sheet I have the following narrative "The second channel provides a permanent change, but the allowable values are automatic/dynamic/comfort (from memory - I think). So, the effect of altering this channel is the same as selecting the driver mode, but the setting is applied (for steering only) regardless of the mode set by the button"
So (and i cant find the original post where I got this from) i presume this only being applied to the steering not the whole car setup.
Happy to be proved wrong.
|
|
|
|
Post by heartless on Jun 15, 2018 13:38:35 GMT
Just in case it annoys you when driving up the motorway and there’s a lane hog in the right lane and you don’t like your car slowing down to his speed  How do I get the car on the other lane to show on my display like it shows on the picture😧 |
|
|
|
Post by vwjap on Jun 15, 2018 14:02:54 GMT
If you haven’t disabled it then set you acc have assist systems displaying and undertake, car will slow to the car your undertaking (I drive on the left 😉)
|
|
