|
|
Post by mintfotog on Dec 28, 2022 6:10:59 GMT
So the question is…does anyone have an explanation for what each “Events Szene” is and does? Is there an explanation of the Hex coding as well? I get that it is dealing with the exterior lighting and the lighting zones for each light. ![]()  |
|
|
|
Post by mitigating on Jan 8, 2023 8:22:31 GMT
|
|
|
|
Post by mitigating on Jan 8, 2023 18:14:40 GMT
I made the first set of changes and it enabled the light animation menu and causes the headlights to turn on sequentially
1. Drl
2. 3 second delay
3. Headlights
The fog lights also come on with 3 if you are using the adaptation changes that have them go on with the headlights.
|
|
|
|
Post by kronik24 on Jan 9, 2023 3:05:32 GMT
Got it to work as well but the light bar comes on with the headlights. Does yours do the same?
DRL's come on for a few seconds then the headlights and light bar turn.
I've see other videos where the DRL's and light bar come on at the same time, then seconds later the headlights come on.
|
|
|
|
Post by mintfotog on Jan 10, 2023 19:18:16 GMT
So mine are setup similarly. I am actually just curious about the hex coding and what each means. For example, I have 0405FFFFF0504FF etc and what do the numbers correspond to and what do the location of those numbers correspond to. Actually, If you don't have your Leuchte functions set correctly it will not light up the light bar. I know the settings to turn whatever light on the exterior into the animation setting I just need to know what all of the hex coding is.
|
|
|
|
Post by whataboutthis on Jan 10, 2023 19:25:33 GMT
|
|
|
|
Post by mintfotog on Jan 10, 2023 19:32:18 GMT
It would help if it were actually long coding. This is an adaptation in the CE module.
|
|
|
|
Post by whataboutthis on Jan 10, 2023 21:02:00 GMT
every day is a school day
|
|
