|
Post by jimmysolli on May 31, 2020 17:56:15 GMT
Turn signal with out brakelights!
Coding in comments under my name !😎 enjoy
|
|
moisb
New Member
Posts: 5
|
Post by moisb on Jun 10, 2020 18:04:55 GMT
Hi OBDEleven, please add more one click apps for Passat B8
|
|
|
Post by pacemaker89 on Jun 26, 2020 6:15:25 GMT
Hi guys, will this work for my B8 Alltrack 2017 with Virtual cockpit here is the code that my local dealer provided to me: QR8 L KMP Without dynamic road sign displayHe told me that I have the camera but option is not activated...just want your confirmation should I take the steps or let it be like it is. Thanks! Traffic Sign Assist Activation Select Control unit 5F (Information Electrical) Adaptation Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21 Değer=Active Select channel (151) vehicle menu operation-menu_display_road_sign_identification Değer=Active Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_threshold_high Değer=Active Control unit A5 (front / advance camera) Security access Access Code 20103 Control unit Long Coding Byte 1 Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active" Select Control unit 17 (Dashboard) Control unit Long Coding Byte 5 Bit 2 Aktivate Control unit A5 (front / advance camera) Adaptation Select : channel numbers indicate end of speed limit Importance to actively invest Show Valid suffix View Channel Valid suffix Corresponding value adjust default: 00100111
|
|
Garko
Full Member
 
Just for Fun
Posts: 125
|
Post by Garko on Jul 5, 2020 21:40:15 GMT
Thanks
|
|
|
Post by touran2016 on Jul 8, 2020 14:16:39 GMT
hello guys . I have retrofit my led low oem headlights with led high oem headlights. everything goes perfect , no error on board or in aplication obd11 . But my brightness for DRL when it lights in drl position is at 10% . And it remains same brightness with other function low beam, turn signal, high beam. I said 10% beacause i check channel 29 (left headlight) and 39 (right headlight) , chanel 1 LED and says that the pwm value is 10% (i attached photos). Also i change the dimwert or dimming on leuchte 2,3 ,4 and 5 and nothing happens. the brightness remains at same procent...10%...Do you know where i can change the factory brightness as it should be like 90% any advise is good
|
|
|
Post by valadur on Jul 28, 2020 11:05:40 GMT
Hello, i am new to the VW Scene. My B8 had no Cruise Control, so i ordered a set from Kufatec. I would like to activate the Cruise control after esembling. Can someone tell me how?
|
|
|
Post by prostudio999 on Jul 28, 2020 23:35:08 GMT
   Turn signal with out brakelights! Coding in comments under my name !😎 enjoy How to activate colors in ambient car lighting. There is only one color and white is it possible to add more colors? Another question, how do the whole turn signal indicators work, because only the ends of the stop lights work for me?Is it possible to code to make blinker work like this?At the moment it shines like this for me, when I turn on the blinker, only one side shines, the other shines red. As in the first picture. My English is a little worse but I hope you understand me
|
|
|
Post by steviesoitis on Aug 22, 2020 10:07:28 GMT
Any one got the coding for 30 colours on the radio display. No app available for my 2018 passat gte but it is available on my partners mk7.5 golf
|
|
|
Post by twinsen on Sept 23, 2020 12:59:37 GMT
Dears,
Passat B8FL, R-Line Edition
How to: - disable chime while ignition on when door open - enable memory on air recirculation - enable memory or set default Lane Assist as inactive - put back the clock (and/or with current date) to the LCD cockpit, to the top middle as before MY2018 - enable 5GHz WiFi radio to avoid busy 2,4GHz band
Cheers, Leszek
|
|
|
Post by chad206 on Oct 9, 2020 3:13:21 GMT
hey guys, would anyone know how to get rid of annoying start up message on discover pro 2? it reads "for your own safety, please follow traffic regulations at all times" it comes up each time car is started and stays there until ok pressed. super annoying!
also interested about the colour adjustment from infotainment too
|
|
|
Post by redplayerb8 on Oct 11, 2020 23:48:50 GMT
Hi, The only step to avoid "tips shown in the Display is to choose the menu. Choose "Kombiinstrument" or "Kombianzeige" an to deactivate the "Eco-Tipps". I did on my car because really annoyingly. Others I don't know... Try, maybe it helps.
|
|
|
Post by chad206 on Oct 15, 2020 2:36:59 GMT
All good figured it out, its under longcoding byte 23
Anyone know how to do the golf R dash design or the passat dash?
Kinda like the design better and ive seen that its been done before.
|
|
|
Post by bigotti on Nov 3, 2020 7:30:43 GMT
Hello, i search, but i can't find ... of i change battery, i understend i have to do adaption, can you tell me how i will do it please? Thanks.
|
|
|
Post by miilits on Nov 3, 2020 19:45:41 GMT
bigotti, under can module search battery adaption and change old coding value +1
|
|
|
Post by bigotti on Nov 5, 2020 7:50:13 GMT
Can module, i Getaway ( 19 )? Thanks.
|
|
|
Post by chad206 on Nov 13, 2020 22:22:57 GMT
Is it possible to change/add driver modes? As in some audis and golfs have additional modes such as dynamic or race modes.
Also I know the basic adjustments can be made in individual mode but are there also adjustments of settings for each mode in obdeleven?
If so please share pals
|
|
|
Post by fagerdaal on Dec 6, 2020 18:03:23 GMT
Is there some way to adjust the limit for the range adjustment on the LED High? I have noticed that the light is reaching longer and adjust the light when i pass 120-130km/h, is it possible to make this at 100km/h f.ex?
|
|
|
Post by luciferus4ever on Dec 15, 2020 6:33:19 GMT
For information, the Traffic Jam Assist option comes in France with the "Drive Assist 2 premium pack", which includes : - Dynamic light assist (for LED high models) - Sign assist - Dynamic lane assist - Side assist (blind spot monitoring) - Pedestrians recognition. - Traffic Jam Assist (which activate the Lane assist Under 60km/h and enables the car to follow the one in front of yours). On my car, which is equipped with "Drive assist 2 pack" (not premium), I have : - Light assist - Sign assist - Dynamic lane assist - Side assist - Pedestrian recognition The Traffic Jam Assist is really poorly documented on the internet, and I couldn't find any information about its coding. I am waiting for the OBDeleven Pro module, so when I have it, I might be able to emit a report, then find someone equipped with the option and to the same ? (I don't know if it works like VCDS, or if it is automaticaly sent through the app). It would be really great to enable this feature. For information, lots of people on Passat forums would like to be able to activate the Traffic Jam Assist, so I am a kind of guinea pig, by buying the OBDeleven module  Best regards.
|
|
|
Post by luciferus4ever on Dec 15, 2020 6:37:52 GMT
Hi guys. Thanks OBD 11 i set all features on my passat b8 ( lane assist, sign assist, fold mirror, ...). I have only one big problem...i wanna set pedestrian recognition. Someone can attach pictures from passat b8 2016 with settings for pedestrian Recognition on module 13, 17, A5 or all necesary settings? Thanks
|
|
AJ
New Member
Posts: 26
|
Post by AJ on Jan 15, 2021 17:44:49 GMT
Hi On My Passat B8 2017is same On control unit 09 there’s no long coding option
|
|
|
Post by Harold on Jan 15, 2021 21:25:51 GMT
|
|
|
Post by twinsen on Jan 28, 2021 16:55:21 GMT
After retrofitting Webasto and changing the climatronic panel, I have lost the option to set Climate Mode in Auto Mode. Now it's only blower regulation on the right on MIB, and on the left I can choose ony 'Off' or 'Manual'. The auto mode is gone, however the physical button works. I tried to code it - Module 08 - Adaptaiton - Climate modes -> Display, but no change. Any idea?
|
|
|
Post by relloht on Feb 9, 2021 8:52:55 GMT
Hi, I've a Passat B8 Variant MJ2020 and tried to code the comfort blinkers. Comfort Blink Cycle Select Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation Comfort Sinyal Sayısı (Cycles) Value: 1-5 Value 3 (standard - 3x blinking) I set it to 4, but there is no Reset posibillity for lights in the car menu...
How can I activate it by MJ 2020?
|
|
|
Post by Harold on Feb 9, 2021 18:50:31 GMT
|
|
bosko
New Member
Posts: 9
|
Post by bosko on Feb 13, 2021 19:47:48 GMT
Hi guys, I am new on the OBDeleven world (and any obd). I used a few apps for my 2019 Passat B8 R Line, but it seems that some of them are not working properly. - Open door alarm OFF /with the ignition ON there is still beeping with opened door/ - Refuel quantity in dashboard ON /this option is available but all I see are three dashes (---) even after driving the car and long press power button/reset on my MIB2/ Any help is well appreciated. Thank you very much. (Each time I got "Success" message)
UPDATE: Few days later *Beeping is now only present with "Engine running" (which can be silenced by pressing OK button on the steering wheel) **After cca. 150 km of driving refuel quantity showed 5l (so it was just a matter of time/mileage)
|
|
|
Post by Harold on Feb 13, 2021 20:25:08 GMT
Coding to Disable Ignition On Warning when Door Open
This disables the beeping sound when driver door is opened while ignition is on.
Dashboard (17) Security access (25327) Adaptation Ignition active message, actuator Driver door (default setting) change into: “no display”
|
|
bosko
New Member
Posts: 9
|
Post by bosko on Feb 15, 2021 18:37:52 GMT
Tried this, but its not working for me.
Thanks anyway.
|
|
|
Post by silviubran on Feb 15, 2021 23:04:50 GMT
Hello guys! I have a Volkswagen Passat Variant (2017) and I am using OBDeleven next gen and I could activate the next codings: -scandinavian tail lights -tail lights DLR outer line, ( or outer with inner stripes) -activate or deactivate DLR's from the central console -activate fan level display on auto mode -activate off road mode on cetral console -changing between 6 modes of graphics the Active Info Display
I couldn't activate the "gauge test/needle sweep". It is not working! Anyone have this problem? Any solution? And another question, is that any codings making front blinker lights, sequential lights? Thank you!
|
|
|
Post by Harold on Feb 17, 2021 19:36:00 GMT
Gauge Needle Sweep (Pointer test) When starting the vehicle, the cluster needles will ‘sweep’ their entire range.
Select Control unit 17 (Dashboard) Control unit long coding Byte 1 Bit 0 Activate
This worked for me (VW Passat B8 2017) with digital display.
|
|
|
Post by silviubran on Feb 20, 2021 21:03:21 GMT
Thank you! I will try this coding and see if it`s working. Can you post a tutorial for showing how to done it with OBDeleven? Thank you!
|
|