mwsuk
New Member
Posts: 1
|
Post by mwsuk on Jan 14, 2022 21:05:58 GMT
Has anyone activated/coded travel assist on their vehicle.
I’ve seen a thread in the id3 pages.
Can anyone share what their long coding was before they changed it and what it’s changed to?
|
|
|
|
Post by stuh88 on Jan 22, 2022 9:53:29 GMT
Hi, I’m after doing this myself as I bought the assist drive basic pack and at the time of purchase included the travel assist but didn’t come with it. I’ve seen this on another forum and I’m keen to try it. Hopefully this helps you.
I just coded Travel Assist to my Enyaq. When I ordered
car I only had Assisted Drive Basic package which did
not include Travel Assist. I did coding using long coding
in A5 Driver assistance module.
This is the log:
Control unit: A5 Driver Assistance
Old value:
02 08 30 2E 1F 91 08 E0 06 24 20 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
New value:
02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I tested and Travel Assist worked fine. I already had
Travel assist button in my steering wheel and before it
did not do anything but now it does.
HC_point_of_intervention
Old: late
New: early_setting_over_menu
Emergency_assist_variante
Old: Not coded
New: Ea variante 2
HC variante
Old: Hc_ variante_
0
New: Hc_variante_2
|
|
|
|
Post by zarjaz on Jan 23, 2022 19:29:09 GMT
Same for me - assisted drive package basic, but no travel Assist. However, I only have one button on the right side of the steering wheel...so I could long code this, but I'm not sure if it'll work without the button. I do know that I've got all the tech that's needed though...
|
|
|
|
Post by jbrougham on Jan 25, 2022 19:40:28 GMT
I tried the coding as I have the basic pack and the steering wheel button. All I got was yellow warning indicators on the dash and when I pressed the wheel button I got unavailable?
|
|
|
|
Post by albertotf on Feb 10, 2022 10:30:54 GMT
Has anyone else been able to test this configuration? I'm very interested in being able to do it in my car, but I'm afraid it won't work and I might break something.
My car has the Drive Assist Basic and also has the button on the steering wheel to activate it.
Thank you very much for your help!
|
|
|
|
Post by svenbllll on Feb 14, 2022 9:31:03 GMT
I tried yesterday, but to a error in de app (error 13, Function cannot be performed). I am kind of new with ODBEleven, so don't understand why. Anyone?
Got the steeringwheel including the button. Button doest do anything now.
|
|
|
|
Post by svenbllll on Feb 14, 2022 14:22:40 GMT
I tried agian. Same as others: got yellow indicators and when pressing the button I says TA is not available. Changed it back without any problems btw. Anyone got this figured out?
|
|
|
|
Post by a1weir88 on Feb 23, 2022 18:48:20 GMT
i have it working on mine, worked first time changing the long coding with obdeleven, i had travel assist basic and assisted cruise on my sportline though
|
|
mmjj
Closed beta tester
Posts: 7
|
Post by mmjj on Aug 14, 2022 17:07:38 GMT
Works perfectly on mine too - 80x with ACC and driving assistance basic.
|
|
|
|
Post by makima on Sept 1, 2022 7:17:17 GMT
Hello everyone
The question is: How does the thing behave when updating the software to 3.0 if travel assist is turned on via obd, does anyone have experience?
|
|
|
|
Post by dezember on Sept 12, 2022 10:16:47 GMT
I have just done this... and it works! Tried driving with Travel assist this morning and I have to say I'm a bit nervous because the steering wheel seems to be a bit nervous too  It keeps on trying to overwrite me HC_point_of_intervention Old: late New: early_setting_over_menu Emergency_assist_variante Old: Not coded New: Ea variante 2 HC variante Old: Hc_ variante_ 0 New: Hc_variante_2 |
|
|
|
Post by speksu on Sept 14, 2022 20:03:00 GMT
Hello everyone The question is: How does the thing behave when updating the software to 3.0 if travel assist is turned on via obd, does anyone have experience? My car which had OBD11 codings went through 3.0 update couple days ago. Update worked fine but all the codings I had done went back to factory state so I had to do those again after the update. |
|
|
|
Post by dezember on Sept 15, 2022 15:17:27 GMT
Can I ask, apart from Travel Assist, what have you been coding with your Enyaq? Just bought the ODB eleven donggle and coded just the travel assist so far. Not sure what else to do with it.
|
|
|
|
Post by speksu on Sept 16, 2022 20:06:17 GMT
I have coded these
-Travel assist
-lane assist memory
-basic cruise control option
-scandinavian DRLs
-key battery warning
|
|
|
|
Post by grubdog on Sept 18, 2022 8:26:16 GMT
Does anyone know the coding to enable the travel Assist menu and change lane assist?
|
|
|
|
Post by newty on Sept 18, 2022 9:39:03 GMT
TA menu comes up when there is something to display - intensity or lane change.
Intensity only works with 3.0 software - with unclear effect in my opinion
Lane change assist needs new 12 channel parking assist and new sensors all arond.
|
|
|
|
Post by grubdog on Sept 18, 2022 15:49:33 GMT
I have software version 3.1 will all the parking sensors including the side sensors and blind spot detection. I have enabled travel assist which works. But I want to be able to enable land change assist.
|
|
|
|
Post by newty on Sept 19, 2022 4:28:39 GMT
Have a try with HC Variante in A5 then - preferably Variante 5.
Also the capacitive steering is mandatory.
|
|
|
|
Post by grubdog on Sept 19, 2022 10:38:43 GMT
Thanks. I have set HC variante to variante 5 and now have lane change option under assistance systems.
I tried it on the motorway and the arrows are just a silhouette. So I am guessing that something else might have to be changed..
|
|
|
|
Post by newty on Sept 19, 2022 18:50:19 GMT
As said before:
You will need the side sensors (Otherwise you will never get a full "free to change"-state and there is no monitoring that the space the car changes into is still free)
You will need a capacitive steering wheel (Otherwise the message "hands on wheel" will never release the lange change)
Side assist obviously.
You will also need to travel over 90km/h
|
|
|
|
Post by makima on Sept 27, 2022 19:08:19 GMT
Travel assist worked great for me with ver.2.3, I turned it on on the top right button on the steering wheel, today after update 3.0 I had to code again and it works, but when I press that button, it tells me that travel assist is selected and I can only turn it on on the front button of the ACC lever
does anyone have a solution to return the possibility to the old button on the steering wheel
grateful
|
|
|
|
Post by newty on Sept 30, 2022 11:24:54 GMT
3.0 got a different behavior of the TA button. Refer to the manual.
TLDR: TA is now kept on, even when acc is disengaged. Switch it on once, then activate ACC eh voila.
|
|
|
|
Post by marcozborn on Oct 1, 2022 13:49:22 GMT
I have coded these -Travel assist -lane assist memory -basic cruise control option -scandinavian DRLs -key battery warning Hi, may you write us the setting for "basic cruise control"? Is it useful? Thank you :-) |
|
|
|
Post by reborn on Oct 12, 2022 20:35:51 GMT
My long coding is completely different with meb3.1
0208306E1FD108E0072430000000000000000000000000000000000000000000
|
|
|
|
Post by sdh1981 on Nov 13, 2022 9:13:56 GMT
I have just done this... and it works! Tried driving with Travel assist this morning and I have to say I'm a bit nervous because the steering wheel seems to be a bit nervous too It keeps on trying to overwrite me HC_point_of_intervention Old: late New: early_setting_over_menu Emergency_assist_variante Old: Not coded New: Ea variante 2 HC variante Old: Hc_ variante_ 0 New: Hc_variante_2 What is your new long coding? If I select Hc_variante 2, I see not the TA option on my navigation screen under assistance options. If I select Hc_variante 5 the TA sign appeared but if you click on it, it say function not available. I got a Enyaq without the KLR steerwheel and not TA button. I replaced the steerwheel for the KLR version with paddles. And coded this in 13 . |
|
|
|
Post by iflamez on Jan 15, 2023 10:00:44 GMT
hello, has anyone activated travelassist for software 3.1? I have the steering wheel with the button for the ta but without function. do I need long coding or is there another way?
|
|
|
|
Post by dezember on Jan 16, 2023 11:04:30 GMT
I've done this back in September (I think). Not sure about the long coding
HC_point_of_intervention
Old: late
New: early_setting_over_menu
Emergency_assist_variante
Old: Not coded
New: Ea variante 2
HC variante
Old: Hc_ variante_
0
New: Hc_variante_2
|
|
|
|
Post by dezember on Jan 16, 2023 11:06:48 GMT
What is your new long coding? If I select Hc_variante 2, I see not the TA option on my navigation screen under assistance options. If I select Hc_variante 5 the TA sign appeared but if you click on it, it say function not available. I got a Enyaq without the KLR steerwheel and not TA button. I replaced the steerwheel for the KLR version with paddles. And coded this in 13 . I am really not sure about the long coding. All i did was follow the above instruction I've got in this forum. In fact, Travel Assist was the only one thing I've managed to do. The rest is either not working ot not needed. I can't still get the welcome screen off!  |
|
|
|
Post by paulitoweb on Jan 31, 2023 22:01:26 GMT
Hi have you been able to enable the travel assist by swapping the steering wheel? Is it now travel assist working? How much have paid for the steering wheel?
thanks in advance.
P
|
|
hinge
New Member
Posts: 1
|
Post by hinge on Mar 31, 2023 14:11:25 GMT
Ive heard its possible to code unlimited travel asssist?
Anybody tried this?
|
|
It keeps on trying to overwrite me 
