|
|
Post by buzweed on Apr 1, 2023 14:16:55 GMT
My long coding is completely different with meb3.1 0208306E1FD108E0072430000000000000000000000000000000000000000000 I have the same issue. My long coding is almost like yours, and when I try the long coding from above I get faults in all other assistants. Is there a new long code for ME3.1? |
|
|
|
Post by flitz85 on May 2, 2023 7:58:11 GMT
I just received my Enyaq, I did not purchase the basic package but I have the correct button and the lever.
Also, I have the possibility to purchase ACC within the shop.
Has anyone already figured out how to activate the Adaptive Cruise Control? Is it the same as travel assistance?
|
|
|
|
Post by marcozborn on May 8, 2023 20:14:51 GMT
Also, I have the possibility to purchase ACC within the shop. Has anyone already figured out how to activate the Adaptive Cruise Control? Is it the same as travel assistance? How much cost it? I have Firmware 3.0 and I'don't have this possibility. Thaks |
|
|
|
Post by flitz85 on May 12, 2023 7:04:14 GMT
|
|
|
|
Post by sdh1981 on May 15, 2023 10:23:52 GMT
I just received my Enyaq, I did not purchase the basic package but I have the correct button and the lever. Also, I have the possibility to purchase ACC within the shop. Has anyone already figured out how to activate the Adaptive Cruise Control? Is it the same as travel assistance? You lucky guy. My Enyaq came with the standard cruise control option and without the acc lever and capacitive steerwheel . So I added the stuff by myself but no support from the dealer or nice option to buy it from Skoda to unlock it. What I have now is the lane assist plus option and you can see it as TA light. It steers automatically like TA but I need to do accelerating and braking by myself. |
|
pfd
New Member
Posts: 6 
|
Post by pfd on Jun 26, 2023 8:03:30 GMT
Hello everybody,
I'm from Portugal and I imported an Enyaq IV80 from France, it's from 2022-11 and already has software version 3.2.
This version has all the cameras and sensors on the side as well as the adaptive cruise control and the Lane Assist but oddly enough it doesn't have the Travel Assist. I have the button on the steering wheel but it does nothing.
I would like to know if the long codes that exist here in this topic can be activated for this software version or have they already changed ??
Thanks in advance for your help.
|
|
pfd
New Member
Posts: 6
|
Post by pfd on Jul 7, 2023 13:15:58 GMT
|
|
|
|
Post by ledneb on Jul 15, 2023 21:07:22 GMT
I have 3.0 software and the long coding worked fine. It would be useful to know whether you have success with 3.2 - if you try it please report back  |
|
pfd
New Member
Posts: 6
|
Post by pfd on Jul 17, 2023 14:32:21 GMT
I have tryed with the first long code and it worked :
Old value:
02 08 30 2E 1F 91 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
New value:
02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
But I did not change all the values and some values put other values
My values:
Old:
02 08 30 2F 1F D1 08 E0 07 24 30 00 00 00 ......
New:
02 08 30 2F 1F D1 10 E4 17 24 30 00 00 00 ......
It works fine!!!
|
|
|
|
Post by ledneb on Jul 17, 2023 18:09:55 GMT
Ah brilliant, thanks for coming back to update!
If you go to garage -> Enyaq -> history what are the old/new text descriptions?
|
|
pfd
New Member
Posts: 6
|
Post by pfd on Jul 21, 2023 15:37:37 GMT
It was not me that made the changes, i do not have de obd eleven.
|
|
fldrs
New Member
Posts: 6
|
Post by fldrs on Jul 25, 2023 21:09:32 GMT
How do you know if you have the sensors on the side and the capacitive steering wheel?
I've got ACC and the button that does nothing on my wheel.
|
|
mmjj
Closed beta tester
Posts: 7
|
Post by mmjj on Jul 26, 2023 19:17:11 GMT
You should be able to find and monitor CU19 GW - Live data - Steering wheel touch recognition status, with changing values when you touch the steering wheel if you have capacitive steering wheel. Can’t really remember out of my stetson, but should be something like this…
|
|
fldrs
New Member
Posts: 6
|
Post by fldrs on Jul 31, 2023 7:56:08 GMT
Thanks for replying!
With "monitor CU19 GW - Live data - Steering wheel touch recognition status", do you mean on the OBD device? I haven't ordered mine yet. I'm planning to buy one just to enable the travel assist, so I would like to know my steering wheel is compatible before making the purchase...
I figured the side sensors are there because I see bikers and cars as well as changes in road markings on my heads up monitor behind the steering wheel when I pass them.
|
|
fldrs
New Member
Posts: 6
|
Post by fldrs on Aug 1, 2023 7:21:47 GMT
I just took the leap and ordered my OBD device, It should be arriving tomorrow. I've got two weeks to try and get this to work, if not I can return it and try to get my money back. Fingers crossed!
|
|
fldrs
New Member
Posts: 6
|
Post by fldrs on Aug 4, 2023 7:33:05 GMT
An update on my attempt to enable Travel Assist with long coding..
After ordering my OBD device I started doing some more research and to my unpleasant surprise I realised that you HAVE to have purchased the Pro Plan for €50 a year to even access the long coding feature... So me thinking to return the device and get my money back would have only been possible for the device itself, NOT for the plan as that is a redeem code and is not refundable after use.
So I took the little gut punch and after receiving my OBD device in the mail I ordered the plan and got to work.
I plugged it in, activated the engine by pressing on my brake pedal and for good measure I even popped the hood.
The app found the device and after waiting quite a bit for it to connect, it finally did. I went straight to the A5 Driver Assistance module and entered this value manually:
02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(I actually just replace the ones that differed from the old value and left the rest alone)
and... IT WORKED! first try. My useless Travel Assist button on my steering wheel finally did something. But.. it did say my traffic sign recognition had an error.. but after a full turning off the car, getting out, waiting for a bit, getting back in and starting it all up again that problem seemed to be resolved.
I went for a test drive and the travel assist worked, well kind of, some hard turns it I had to help a bit but I recon on the highways it will work flawless.
So thanks for everyone here who contributes to these things. You just helped me get a feature on my car I thought would have not been possible when receiving it. And this for just around €100 and a bit of nerves.
|
|
fldrs
New Member
Posts: 6
|
Post by fldrs on Aug 4, 2023 8:09:35 GMT
Now I'm looking for a way to disable the hands-on-steering-wheel alert and get rid off the welcome privacy screen on 3.1.
If anyone has a way to longcode these, I would be very greatful!
|
|
ukeny
New Member
Posts: 4
|
Post by ukeny on Aug 25, 2023 15:32:41 GMT
The privacy screen is really annoying. I have a 80x MY23 with Software 3.5. I long code for this would be super nice!
As far as I know it was possible in earlier versions of car software with odbeleven?
|
|
|
|
Post by freundpe on Sept 16, 2023 9:41:20 GMT
Hey togethe,
In my case, after successful coding of the TA, no menu for TA is displayed for the assist systems??? Which bit could I have forgotten?
SW Car 3.0
Long coding follows when I have OBD11 at hand again.
Deserting the TA fails more often... if he goes but dan really good.
|
|
|
|
Post by mattidzubak on Sept 26, 2023 17:51:41 GMT
Hi,I have obdeleven but when I try to longcode die TA on enyaq it was not possible because I have to PRO or Ultimate program.do you have the same experience?I heard that it used to be “free”,thanks
|
|
|
|
Post by rl2000 on Dec 29, 2023 17:20:42 GMT
I just received my Enyaq, I did not purchase the basic package but I have the correct button and the lever. Also, I have the possibility to purchase ACC within the shop. Has anyone already figured out how to activate the Adaptive Cruise Control? Is it the same as travel assistance? You lucky guy. My Enyaq came with the standard cruise control option and without the acc lever and capacitive steerwheel . So I added the stuff by myself but no support from the dealer or nice option to buy it from Skoda to unlock it. What I have now is the lane assist plus option and you can see it as TA light. It steers automatically like TA but I need to do accelerating and braking by myself. Where did you buy the lever? |
|
|
|
Post by matze-pe on Jun 20, 2024 6:20:46 GMT
An update on my attempt to enable Travel Assist with long coding.. After ordering my OBD device I started doing some more research and to my unpleasant surprise I realised that you HAVE to have purchased the Pro Plan for €50 a year to even access the long coding feature... So me thinking to return the device and get my money back would have only been possible for the device itself, NOT for the plan as that is a redeem code and is not refundable after use. So I took the little gut punch and after receiving my OBD device in the mail I ordered the plan and got to work. I plugged it in, activated the engine by pressing on my brake pedal and for good measure I even popped the hood. The app found the device and after waiting quite a bit for it to connect, it finally did. I went straight to the A5 Driver Assistance module and entered this value manually: 02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (I actually just replace the ones that differed from the old value and left the rest alone) and... IT WORKED! first try. My useless Travel Assist button on my steering wheel finally did something. But.. it did say my traffic sign recognition had an error.. but after a full turning off the car, getting out, waiting for a bit, getting back in and starting it all up again that problem seemed to be resolved. I went for a test drive and the travel assist worked, well kind of, some hard turns it I had to help a bit but I recon on the highways it will work flawless. So thanks for everyone here who contributes to these things. You just helped me get a feature on my car I thought would have not been possible when receiving it. And this for just around €100 and a bit of nerves. hello, is it also possible to code from „normal cruise control“ to „ACC“ or „TA“ with this coding? |
|
|
|
Post by ivdriver on Jul 7, 2024 11:02:11 GMT
Now I'm looking for a way to disable the hands-on-steering-wheel alert and get rid off the welcome privacy screen on 3.1. If anyone has a way to longcode these, I would be very greatful! I’ve the same question. I’m getting very annoyed because of this. I’m already happy if I can extend the time before the alert gets on. |
|
