rupra
New Member
Posts: 42
|
Post by rupra on Apr 27, 2021 23:08:05 GMT
Hi, I saw a type of coding about rear tail light's. this coding is done for many car. Does anyone know that coding steps? Here is the video's about:
|
|
|
|
Post by dv52 (Australia) on Apr 28, 2021 22:07:59 GMT
read THIS - the tweak is specifically designed to apply the lock/unlock lighting effect in the videos on the high-level brake light, but the same can be done to ANY of the 35 x exterior lights on a MQB platform car.
Don
|
|
rupra
New Member
Posts: 42
|
Post by rupra on Apr 28, 2021 22:28:58 GMT
Thank you, I'm grateful for response. I will try it tomorrow. Hope I wont error with anything. My english is not good but as I understood I will do Central Locking option just I will select the tail light's channel. I'm not good at try-learn with this product hope will be okey. There is one thing ı cant understand, in THAT post it flashes but in the video it is just running a few second. How I can figure out this situation?
|
|
|
|
Post by dv52 (Australia) on Apr 28, 2021 23:23:18 GMT
rupra : The "flashing" depends on the Lamp capabilities (LED, or incandescent) and on how the Leuchte-set (what you call "light's channel") is programmed. If you want assistance with your car - post-up screen shots of the Leuchte-set for the lamp that you want to use on one side of the car. To be clear, I need to see ALL 19 x adaptation channels in the Leuchte-set Don
|
|
