Edin
New Member
Posts: 41 
|
Post by Edin on Jan 30, 2017 17:40:55 GMT
Hello . The traffic sign was included in the Highline package. I did not do that. Backup I've seen. Thank you .
|
|
|
|
Post by TheSpaniard on Jan 30, 2017 20:28:02 GMT
Where is the sign recognition showing up, in MFD, In infotainment/nav or in both?
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Jan 30, 2017 20:43:32 GMT
In the MFD. And in the Navi left above is indicated. But what I have noticed when I leave Austria comes message signal assistant not available. I do not understand that. This probably has the car and equipment only for Austria is thought.
|
|
|
|
Post by TheSpaniard on Jan 30, 2017 20:59:29 GMT
Hi! It would be sweet if I managed to activate traffic sign recognition in my car  Could you send me your A5 backup? I think there is some changes that need to be done there to activate sign recognition. Thanks in advance. |
|
Edin
New Member
Posts: 41
|
Post by Edin on Jan 31, 2017 9:00:17 GMT
Yes but only at the weekend.
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 4, 2017 16:57:44 GMT
Could you send me your 13 backup?
|
|
|
|
Post by TheSpaniard on Feb 4, 2017 21:47:50 GMT
Of course, I will try to do it tomorrow. I will also send you the scan log where you can see the long coding of all the control units. You get it after doing a fault scan and then email from the upper right corner.
|
|
|
|
Post by TheSpaniard on Feb 5, 2017 12:12:28 GMT
I sent you the 13. I have changed everything to English in the app so the backup is now in english, now it's easier to compare with info in this and other forums.
|
|
|
|
Post by TheSpaniard on Feb 5, 2017 12:19:19 GMT
Could you make me a favour and see if you can get into "change service" option in 5F module? I was getting an error message when I tried before, so I couldn't even get in, but now I can get into there without error. I don't know what I did to make this happen, maybe is the app that has been updated for a couple of days ago I think...
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 5, 2017 12:24:35 GMT
Thank you . Only I have now a problem. If I drive with ACC and approach me standing cars then my car does not slow. Only brakes and stops distance when moving in front of me car.
|
|
|
|
Post by TheSpaniard on Feb 5, 2017 12:37:09 GMT
Did you have ACC from the beginning or are you trying to activate it?
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 5, 2017 12:41:26 GMT
No the original is installed. I have only activated line asistent and now makes acc problems.
|
|
|
|
Post by TheSpaniard on Feb 6, 2017 20:31:32 GMT
How did it go with your ACC? Are you trying to activate lane assist by copying code/adaptations from my car or are you following some step-by-step description at some forum?
Did you try to enter the Change Service in 5F? I would like to know the reason of why I can enter now but I couldn't before. If it works for you then it is because of the updated app, otherwise I have to think and try to recreate what I did.
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 6, 2017 22:32:07 GMT
I have tried with your and with other coding the line assistant to activate but then I have reset all values. And 5F that is only info system radio and navi.
|
|
|
|
Post by TheSpaniard on Feb 6, 2017 22:52:38 GMT
In 5F, can you choose Change service? Is in the same menu where you can choose Coding or Adaptations.
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 7, 2017 10:00:24 GMT
Do you have ACC and can you drive with and if you closer to the STANDING auto brakes the ACC by itself? With me now not only when this car is driving in front of me. I still have to control 5F.
|
|
|
|
Post by TheSpaniard on Feb 7, 2017 14:37:48 GMT
Do you mean your car slows down when you approach a car moving in front of you, but it doesn't slows down if the car in front of you has completely stopped, like in a traffic jam?
I think my ACC slows down the car in both cases, but I am not completely sure,I'll have to test.
Do you have automatic gearbox? Then I understand your point. I have manual gearbox, so I slow down to stop the car myself. Maybe that's the problem if you are looking at my code, you need to see how it is coded with automatic gearbox.
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 7, 2017 16:01:26 GMT
OK . All clear I got automatic DSG and he had to brake completely. He does this but also should stop against coalision with standing cars.
|
|
|
|
Post by TheSpaniard on Feb 8, 2017 21:27:05 GMT
Edin, which steps did you follow to enable Lane assist? So I can put it in the first post.
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 9, 2017 15:57:39 GMT
Line Assist Activation
Select Control unit 17 (Dashboard)
Control unit Long Coding
Bye 4
Bit 6 Activate
Bye 11
Bit 1 Activate
Select Control unit A5 (front / advance camera)
Control unit Long Coding
Bye 0
Bit 0 Activate
Select Control unit A5 (front / advance camera)
Security access
Access Code 20103
Adaptation
Channel - Seçim HCA_On_State
Put emphasis on menu
Channel - Seçim HCA_Warning_intensity
Put emphasis on menu
Channel - Seçim BAP_Personalisierung
Put emphasis on not activated
Select the time of engagement
Set adjustment via menu - emphasis on late
Select Personalization spurt holding an assistant to a terminal 15 - channel
Set value to last setting
Select Control unit 44 (power steering)
Control unit Long Coding
Bye 0
Bit 0 Aktif
Select Control unit 5F (Informationselektronik)
Adaptation
(49) function -Vehicle list BAP LDW_HCA_0x19
Activate
(21) vehicle menu operation-menu_display_Lane_Departure_Warning
Activate
(23) vehicle menu Bedienung_menu_display_Lane_Departure_Warning_over_threshold_high – channel
Activate
|
|
|
|
Post by TheSpaniard on Feb 10, 2017 17:14:25 GMT
Are you sure that's what you did?
I'm just wondering, because my car has lane assist but my control unit 17 byte 4 has value 00, and there is no byte 11 (only 5 bytes, number 0 to 4)...
And I don't have that Adaptation codes in unit A5 either...
Could you make a total scan and send it to me, so I can see all your control units and coding? It would be of great help to me.
Cheers
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 10, 2017 21:29:17 GMT
And for that I can not activate Lane Assistant. It appears in the menu but when activated comes message line assistant not available. It is missing coding and I do not believe the code lies in the STG17
|
|
|
|
Post by TheSpaniard on Feb 11, 2017 23:14:54 GMT
And for that I can not activate Lane Assistant. It appears in the menu but when activated comes message line assistant not available. It is missing coding and I do not believe the code lies in the STG17 Have you tried activating in A5 ..Byte 11 bit 1 or ..Byte 16 bit 7 Both are Active in my car but not in yours. Doing this comparisons is how I managed to activate traffic sign assist in my car. |
|
|
|
Post by TheSpaniard on Feb 11, 2017 23:31:51 GMT
In the MFD. And in the Navi left above is indicated. But what I have noticed when I leave Austria comes message signal assistant not available. I do not understand that. This probably has the car and equipment only for Austria is thought. See my first post, unit A5 byte 10 and Adaptation. This maybe makes sign detection work outside Austria in your car. |
|
|
|
Post by TheSpaniard on Feb 12, 2017 8:42:06 GMT
Does traffic sign recognition in MFD show up like this for you? (first big in the middle, then gets small and goes to the top. This is an image from someone else in another forum) In my car I only get the big sign in the middle, it doesn't minimize and go up to the top...  ![]() |
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 18, 2017 15:18:40 GMT
Does traffic sign recognition in MFD show up like this for you? (first big in the middle, then gets small and goes to the top. This is an image from someone else in another forum) In my car I only get the big sign in the middle, it doesn't minimize and go up to the top... ![]()   |
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 18, 2017 15:22:14 GMT
So it looks with me traffic sign recognition. But My question: Have you already activated Car in Discover Media? I'm not coming into developer mode comes message not available?
|
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 18, 2017 15:24:40 GMT
And track assist assistant line I have released and works except steering wheel vibration but for that one needs I believe additional hardware.
|
|
|
|
Post by TheSpaniard on Feb 18, 2017 16:09:49 GMT
So it looks with me traffic sign recognition. But My question: Have you already activated Car in Discover Media? I'm not coming into developer mode comes message not available? Have you tried with security access code 20103, then Change Service to developer, then Adaptation developer mode? I've been speaking to a guy with a Seat Alhambra, Discover Media and he has also activated the secret menu. But the last option Valet Parking Mode that you see in my picture doesn't appear in his menu... I have Composition Media, not Discover Media, I hope that's not why I get the Valet Parking Mode option... |
|
Edin
New Member
Posts: 41
|
Post by Edin on Feb 18, 2017 17:55:05 GMT
Yes I have activated now development but Valet Parking option is not there
|
|
