|
|
Post by casalese89 on Nov 18, 2021 8:10:05 GMT
Just use 1 click app from the Golf 8 to get this 😀 How can I choose the Golf 8 for this on the Seat Leon in the app? I can't select it I always want more information about VIM. How can select this OneClick app for Golf 8 if I have the Seat Leon? |
|
|
|
Post by newty on Nov 18, 2021 9:15:14 GMT
When you press the + and - keys on the steering wheel when acc is active the speed is altered in 10 km/h steps. It would be nice if this was in 5 km/h steps instead. You can go up and down 1km/h with the Set and Res keys but since I always want to set mine 5 km/h above the limit it's a lot of pressing  Hi sealen1 Were you ever able to find a way to change the ACC stalk up/down step from 10km/hr to 5km/hr? I have a similar experience to you and would like the same change. I've asked on Briskoda and in a Spanish Octavia owners forum, with no results. I noticed in an older thread on some forum that the UK models of this platform step +/ 5MPH (about 8km/hr), so, clearly, it's not absolutely fixed, though it may be tied to a units setting, or only be possible by hacking firmware instead of "long coding" a configuration value... thanks, Jay Spain Setting the Speedometer to MPH will result in 5mph steps. Again, hardcoded. You can still try to change Operation Mode in the ACC to 2, which at least changes some things in the user interface in VWs "too much buttons"-steering wheels. |
|
ouz
New Member
Posts: 21
|
Post by ouz on Nov 18, 2021 19:34:25 GMT
Hi,
High beam assist does not work for me. In Control unit: A5 Driver Asistance there are some settings about high beam too. I tried some combinations but no luck. Any suggestion ? Thanks in advance.
 
2020 Leon FR (KL) 130ps manual tranm.
Also Engine Power Display from one click apps does not work.
Lane assist set early is working but can we change the settings(early, normal, late) from the multimedia ? Is there any posibility ?
Daytime light is working after coding and now there is an on/off option in the multimedia.
Cupra view is also works.
|
|
|
|
Post by davidgballester on Nov 18, 2021 23:05:31 GMT
Does the lane assist set to early not prompt you with that annoying message every 10 seconds?
|
|
ouz
New Member
Posts: 21
|
Post by ouz on Nov 19, 2021 1:07:03 GMT
Yes it does, thats why I want to change options of the lane assists by multimedia.
|
|
|
|
Post by newty on Nov 19, 2021 7:58:53 GMT
Hi,
High beam assist does not work for me. In Control unit: A5 Driver Asistance there are some settings about high beam too. I tried some combinations but no luck. Any suggestion ? Thanks in advance.  (...)
2020 Leon FR (KL) 130ps manual tranm.
Also Engine Power Display from one click apps does not work.
Lane assist set early is working but can we change the settings(early, normal, late) from the multimedia ? Is there any posibility ? High Beam Assist is controlled by FoD. So you will technically need a Swap like enablement for this. Buy it in the store when it is avaliable. Correct Coding would be "No Additional" "High Beam Assist" "Variant 2" Engine Power Display is not avaliable in all Motor/Clutch combination, still give it a try in the Manual adaption. Lane Assist intensity setting does not work (You may see a Menu for Warning Intensity when playing around with the coding, but that one does reset with the ingition and feels like nothing is changed) |
|
|
|
Post by blikstjinder on Nov 19, 2021 18:07:12 GMT
Does the lane assist set to early not prompt you with that annoying message every 10 seconds? Yeas drove me crazy so I disabled the setting from Early back to default. 😅 But the lane assist worked perfectly with the early setting enabled. |
|
|
|
Post by bajer0 on Nov 20, 2021 0:42:23 GMT
Was someone able to enable "travel assist" for manual transmission?
By travel assist i mean keeping car in the middle of lane and reacting on road curvers, etc
|
|
|
|
Post by newty on Nov 20, 2021 10:33:15 GMT
All this does not need travel assist or DSG.
It is a ACC function after all, relying basically on data from the Navigation.
|
|
ouz
New Member
Posts: 21
|
Post by ouz on Nov 20, 2021 22:32:16 GMT
Can I ask about the "Window auto drop" function in the one click app, Will the window system is damaged when window is frozen or any similar conditions? winter is coming  |
|
|
|
Post by davidgballester on Nov 21, 2021 9:20:56 GMT
So now with SFD unlocked, do you guys think it will be possible to remove the warning every 10 seconds of puting hands on steering wheel when setting lane assist to early?
|
|
cenzor
Closed beta tester
Posts: 12
|
Post by cenzor on Nov 23, 2021 5:16:01 GMT
Hello! Did someone manage to enable VIM (video in motion ) on the KL Seat Leon? I am still struggling to do it..  I found working VIM (video in motion) with another tool : OBDAPP Seat Leon KL This would mean that it is possible to activate it via OBDeleven ? Any ideas on this one? |
|
|
|
Post by vittogoro on Nov 25, 2021 17:33:21 GMT
AAAD->IPTV or CARTUBE
|
|
cenzor
Closed beta tester
Posts: 12
|
Post by cenzor on Nov 25, 2021 20:11:47 GMT
I don't have Android auto. So no go for me. Also , I prefer to have VIM , as I can leave the USB c stick inside and not have the phone stuck there..
|
|
|
|
Post by danwhite95 on Nov 26, 2021 8:24:46 GMT
Android Auto is wireless now.
No wires at all.
|
|
|
|
Post by vittogoro on Nov 26, 2021 8:48:11 GMT
No sw 16xx works only with cable... I'm in this situation 😭
|
|
cenzor
Closed beta tester
Posts: 12
|
Post by cenzor on Nov 26, 2021 12:21:30 GMT
Android Auto is wireless now. No wires at all. I don't have Full Link installed, that is the issue. No AA, carplay or mirrorlink possible. |
|
|
|
Post by alexcupra on Nov 26, 2021 15:14:34 GMT
Hi
What is FoD
|
|
|
|
Post by tonitoto84 on Nov 27, 2021 11:14:50 GMT
Android Auto is wireless now. No wires at all. What is posible? I dont have option only with cable |
|
jacek73
Closed beta tester
Posts: 41 
|
Post by jacek73 on Nov 27, 2021 11:45:42 GMT
Your SW on infotainment should be 18×× or something
|
|
Antera
Closed beta tester
Posts: 49
|
Post by Antera on Nov 28, 2021 9:21:26 GMT
So now with SFD unlocked, do you guys think it will be possible to remove the warning every 10 seconds of puting hands on steering wheel when setting lane assist to early? Iff its frozen the Windows tey a few times and then stop to try. All this does not need travel assist or DSG. It is a ACC function after all, relying basically on data from the Navigation. Travel assist is only coded when changing the steering wheel and have lane assist and acc |
|
goldy
Junior Member
Posts: 59
|
Post by goldy on Nov 28, 2021 10:13:04 GMT
Zdravo Application per click is almost half-working. The memory of the long beam, g meter, navor, urine, cupra view does not work.
|
|
goldy
Junior Member
Posts: 59
|
Post by goldy on Nov 28, 2021 10:14:36 GMT
If Adaptive 8 is selected here and it does not change everything from the application to the click.
|
|
goldy
Junior Member
Posts: 59
|
Post by goldy on Nov 28, 2021 13:17:29 GMT
Hello high beam memory not work.Lock/unlock acoustic confirm one click aplikacion not work.Digital cockpit not work.Transmission temperature not work.G-meter display not work.Engine power,torque,not work.
|
|
frdan
New Member
Posts: 1
|
Post by frdan on Nov 28, 2021 18:25:31 GMT
Hey guys new to OBD, I’ve just bought the Leon FR KL and it doesn’t come with the wrap around light, looks like the lights in there just not coded in, can this be done with ODB? Thanks in advance for your time
|
|
|
|
Post by bajer0 on Nov 28, 2021 21:49:37 GMT
All this does not need travel assist or DSG. It is a ACC function after all, relying basically on data from the Navigation. Travel assist is only coded when changing the steering wheel and have lane assist and acc So New steering wheel is needed. But i think steering wheel with Travel assist always have +/- for DSG. Will it be a issue with manuall? |
|
|
|
Post by jvorst1222 on Nov 29, 2021 7:51:45 GMT
Hello, i'm new to OBD and have a Seat Leon 1.5etsi FR launch edition (Netherlands) since february this year. Finanlly SFD is unlocked but before i want to order an OBDmodule i want to be sure if it can be done.
Also i want to know if i change the tail lights to Scandinavian DRL that the tail lights stil have their welcome lights fading in.
Options i want to change
- Change the comfort turn signals from 3 to 5 times
- Digital Cockpit view as in the Cupra Leon
- Scandinavian DRL during daytime
Thank you!
|
|
|
|
Post by skiera on Nov 29, 2021 11:23:55 GMT
Hi
My soft ver. Is 1672. Scandinavian Lights works fine, turns on with The ignition so not sure if has fade effect. Tricky with comfort turn signal, doesnt work over app. Long coding allows a range amount 0-3 and refuse to accept Any changes. Cupra cockpit-easy.
|
|
|
|
Post by falcontech on Nov 30, 2021 9:15:37 GMT
Options i want to change - Change the comfort turn signals from 3 to 5 times - Digital Cockpit view as in the Cupra Leon - Scandinavian DRL during daytime Is possible to set from 2 till 5 turn signal (I don’t tested). Cupra View and Scandinavian DRL I turned ON and work. |
|
|
|
Post by simoammi on Dec 1, 2021 22:06:14 GMT
Hi, new coding  CUPRA VIEWER and CUPRA STYLE 1/ Adding new views to cockpit - Cupra View on Leon FR - Select Control unit 17 - Select Adaptation - Select View Activation - activate view 8 the others are useless 2/ Adding Cupra Style car & Logo on display and infotaiment - Select Control Unit 17 - Select Long Coding - Select Start Screen - Select Version 2 - Select Lap counter - Set to Yes - Select Vehicle variant - Set to Derivative 6 ( this Cupra Sporturer)
- Set to Derivative 4 ( this Cupra Hachback) - Select Multimedia 5F - Select Long coding - Select Car Bodystyle addition - Set to 1 - Select Vehicle type power stage 2 - Set to Yes - Select Adaptation - Select Function configuration hmi - Select Skinning - Set to 2 - Select Screenings - Set to 1 THIS ACTIVATES A SORT OF TRAVEL ASSIST. TO WORK, THE LANE ASSIST EARLY MUST ALSO BE CODED AND THE ACC MUST BE ACTIVE WITH THE SET SPEED. IT ALSO WORKS UNDER 60 KM/H. - Select Module A5 (Driver Assistance) - Select Long Coding - Select HC Variant - Set To Variant 1 - Select Point Of Intervention - Set To Early --------------------------------------------------------------------------------------------------- SCANDINAVIAN DRL - Select Central Elettric 09 - Select Adaptation - Select Daytime running lights - Select Tagfahrlicht-Dauerfahtlicht aktiviert zusaetzlich standlicht - Set To Active ---------------------------------------------------------------------------------------------------- ONLY DSG - AUTOMATIC DOOR RELEASE WHEN THE P BUTTON IS PRESSED - Select Central Elettric 09 - Select Adaptation - Select Zv Autolock - Select automatic unlock nar - Set to Active ----------------------------------------------------------------------------------------------------- DEACTIVATES ENGINE IGNITION WITH STEERING WHEEL MOVEMENT - Select Module 44 (Sterring Assistance) - Select Long Coding - Select Engine start through power steering - Set To Not active ----------------------------------------------------------------------------------------------------- DEACTIVATES ENGINE IGNITION WITH VEHICLE MOVEMENT THAT BEFORE YOU. IF ACC IS ACTIVATED, THE MOTOR WILL RE-ACTIVATE DESPITE THIS SETTING - Select Module 13 (Adaptive Cruise Control) - Select Adaptation - Select Expanded restart function - Set To Off -------------------------------------------------------------------------------------------------------- ACTIVATE FOG LIGHTS WITH HIGH BEAM FLASHING – NOT WORK ON CUPRA LEON - Select Central Elettric 09 - Select Adaptation - Select LEUCHTE 12 NL L B45 - Select Lichtfunktion D 12 - Set to Lichthupe - Select Dimmwert DEF 12 - Set to 100 - Select LEUCHTE 13 NL R B5 - Select Lichtfunktion D 13 - Set to Lichthupe - Select Dimmwert DEF 13 - Set to 100 ----------------------------------------------------------------------------------------------------- ACTIVATE OEM ANTI THIEF ALARM WITH HORN AND DIRECTION INDICATORS - Select Central Elettric 09 - Select Adaptation - Select Diebstahlschutz Schnittstelle - Select DWA verbaut - Set to installed - Select Diebstahlschutz.Modulsoftware - Select Akustischer Alarm ueber Hupe - Set to Active - Select Anti.theft blinkers by inter.door handle activ. - Set to On - Select DWA campermode - Set to Active - Select Dynamic turn signal control - Select Theft flashing - Set to active |
|
