|
Post by Thirsty on Aug 24, 2020 8:15:31 GMT
Use the following format to report bugsDescription of bug: your bug descriptionAndroid software version: your android version Phone: your android phone modelDongle variant: Firstgen or Nextgen Car: your vehicle brand, model and year App profile: your app user email or username Changelog
v0.27.0
- Fixed issue when connecting to a brand new device
|
|
|
0.27.0
Aug 24, 2020 9:32:35 GMT
Post by peter036 on Aug 24, 2020 9:32:35 GMT
Dongle update stuck in a loop Android 7.1.1 Samsung J5 Nextgen dongle Skoda Fabia estate (5J) 2014 On connecting in the car this occurred: message for dongle update appeared. Confirmed by pressing update. Following message appears:
Device update Do not unplug device from car while updating.(sounds reasonable) Make sure your phone battery is charged at least 15%. (also sounds reasonable) Do not leave car while updating. (i assume this is for not losing contact between device with app and dongle)
As there is no other choice than 'update', I pushed that, that option changed to 'updating' Then a light blue line appears with a stretching and shrinking dark blue bar sliding over it from left to right, indicating activity. And that's where it 'ends': it never finishes updating. I tried logging off and back on, and changing app settings on the phone....no luck so far.
Edit:
it's up and running again, after uninstalling the app from my phone and installing it again after a cold reboot, it gave me the update message again.
I left it running in the car for (I think) over an hour (ignition off), when I looked again is was ready to go...........Me happy!
|
|
Deleted
Deleted Member
Posts: 0
|
0.27.0
Aug 24, 2020 18:27:54 GMT
Post by Deleted on Aug 24, 2020 18:27:54 GMT
Description of bug:
Vontrol unit 09 Long coding I went to Byte 10 Bit 4 and changed Status of fuel cap lock from Active to not active worked fine. I then went and changed it back and got (31) Function not available, I had to log off and back on again to get the change to accept.
Further when I went to make a save (but not change had been applied) I got Coding not changed with Cancel or Write (not sure why i would want to Write) I selected the Write option and got (31) Function not available
Android software version: 9 Phone: Sony Xperia Dongle variant: Nextgen Car: your vehicle Seat Leon Cupra 280 App profile: username - cupra280.co.uk
|
|
|
0.27.0
Aug 26, 2020 9:04:08 GMT
via mobile
petro8 likes this
Post by othmane on Aug 26, 2020 9:04:08 GMT
Description of the bug : the function Long coding is not available in -09- the central electrics anymore
Android 9.0
Telephone : xiaomi Redmi Note 8
Firstgen
Car: seat ibiza kj (2018-)
Email : orhmanelaroussi@gmail.com
|
|
|
0.27.0
Aug 26, 2020 9:07:34 GMT
via mobile
Post by othmane on Aug 26, 2020 9:07:34 GMT
Description of the bug :
When i go to the Module (5f multimedia) in adaptation --> (dashboard display configuration) it's says that the function is not available
Android 9.0 Telephone : xiaomi Redmi Note 8
Firstgen
Car: seat ibiza kj (2018-)
Email : orhmanelaroussi@gmail.com
|
|
|
Post by mrtron on Aug 27, 2020 8:37:01 GMT
Description of the bug :
When i go to the Module (8c hybrid/hv battery) in live data --> value "HV Nominal Capacity" is missing
Android 10.0 Telephone : Huawai P30Pro
Firstgen
Car: Audi e-tron GE (2018-)
Email : derblauzahn@gmail.com
|
|
|
0.27.0
Aug 30, 2020 22:25:06 GMT
Post by supper1267 on Aug 30, 2020 22:25:06 GMT
Dongle update stuck in a loop Android 8.0 LG V20 Nextgen dongle 2011 Audi A5 Supper1267@gmail.com Once connected to the ob2 port a device update starts with the following: Device Update Do not unplug device from car while updating. Make sure your phone battery is charged at least 15%. Do not leave car while updating. I have left it there for about an hour and no change. Unlike peter036 his fix did not work for me
|
|
|
0.27.0
Sept 4, 2020 6:34:45 GMT
Post by OBDeleven on Sept 4, 2020 6:34:45 GMT
The issue about e-Tron already forwarded to our developers and we are investigating this case.
About the update issue, would be best if you could open a ticket to Customer Support, by pressing side menu -> help, we will need to get the logs in order to investigate it.
Seat Ibiza from 2018 and later models, does not have any coding on the control unit 09. All the functions can be adjusted via Adaptations. This was done by the manufacturer.
For other issues, we will need to get the logs too, so please, open the ticket via the application to contact Customer Support.
|
|
|
0.27.0
Sept 5, 2020 17:11:02 GMT
Post by theclutch on Sept 5, 2020 17:11:02 GMT
Description of bug: Mileage units (miles vs kilometers) does not convert from kilometers in the "Info" screen for the car model. It was showing kilometers correctly, I changed the units to miles and now it shows "0" miles. Changing back to kilometers shows the correct mileage in kilometers. Android software version: 10 Phone: Samsung Galaxy S10 Dongle variant: Nextgen Car: 2013 VW GTI App profile: armand_aquino@hotmail.com
|
|
|
0.27.0
Sept 7, 2020 4:32:11 GMT
Post by OBDeleven on Sept 7, 2020 4:32:11 GMT
The issue with the Audi e-Tron battery capacity of live data was missing is fixed now. You will not need to update the application. theclutch could you open the ticket via your OBDeleven application for Customer Support?
|
|
|
0.27.0
Sept 11, 2020 10:07:44 GMT
Post by cdet67 on Sept 11, 2020 10:07:44 GMT
Description of bug: Change settings to landscape mode results in blank screen, no actions possible. The main problem is that I cannot change back to portrait mode, because of the black screen. Though the information is stored with the user information, and not in the app itself, even a deleting memory and reinstalling of the app does not help here. Only chance: using another device that shows the landscape modus, then change settings again to portrait mode. Android software version: 10 go Phone: Ulefone Note 8P Dongle variant: Firstgen Car: irrelevant App profile: irrelevant
|
|
|
0.27.0
Sept 14, 2020 8:04:40 GMT
Post by astepanov on Sept 14, 2020 8:04:40 GMT
Description of bug: [BLOCKER] OBD11 logs to car history long coding change that is based on comparison of current car long coding and previously scanned car long coding. Android software version: Android 11 Phone: Pixel 3a Dongle variant: Firstgen Car: VW Tiguan 2, 2019 App profile: stepanov.standy(@)gmail(DOT)com I have reported all details to a separate thread forum.obdeleven.com/thread/9893/critical-silently-changes-coding-blocks in Tiguan 2 forum topic. Root cause: I have found the root cause. It is quite serious defect in OBD11 software. I've scanned my own tiguan and have found similar changes in long coding in the car history. I've compared car history from both cars (mine and previous car) and confirmed my assumption. OBD11 remembers long coding from the previous car, when you scan a new car, diff in long coding for each block between two cars is logged as long coding change in the car history. That is it OBD11 Team, you owe me.
|
|
Deleted
Deleted Member
Posts: 0
|
0.27.0
Sept 20, 2020 8:06:42 GMT
Post by Deleted on Sept 20, 2020 8:06:42 GMT
Description of Problem: I am getting very confused these days about what is in what release as the google via my mac shows different things to my Android phone. Anyway according to my phone this version is now closed and replaced by 0.28.0 which has (although again according to Google this was in 0.27.0 as well) and was reported on face book on 28th of last month
Added dialog showing whether hood needs to be opened for write operation. Fixed missing long coding descriptions in history Fixed output test not showing values on some vehicles Fixed live data showing incorrect values on some cases Fixed incorrect fault indicator in control unit list when connected to vehicle Fixed language selection issue where selecting different language would have no effect Fixed missing live data in engine ECU
|
|
|
0.27.0
Sept 21, 2020 8:40:15 GMT
via mobile
Post by caner991 on Sept 21, 2020 8:40:15 GMT
why is the new version not coming?
|
|
|
0.27.0
Sept 21, 2020 9:00:38 GMT
Post by Thirsty on Sept 21, 2020 9:00:38 GMT
@testeronline There's no new version available for me. I'll create the thread once the version is rolled out for everyone. caner991 I don't know they will have their reasons.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 21, 2020 9:18:06 GMT
This release is even stranger than normal. Release on Friday but I only got it on Sunday as I was looking for the update, My guys in Spain have also got it. Dont suppose they have made it for Beta users only by any chance.
No problem about waiting Just to add, here is what I see when I look at playstore via my Windows PC Updated on the 17th Sept but version number stays as 0.27 When I log in via the phone I get v0.28.0 on the 16th
|
|
fwj
Junior Member
Posts: 99
|
0.27.0
Sept 21, 2020 13:50:59 GMT
Post by fwj on Sept 21, 2020 13:50:59 GMT
I also received this new version 0.28.0 already on last Friday, google play store (on my smartphone) reported it to me as a new version. I'm from Germany.
|
|