|
Post by michelaudia3 on May 17, 2020 16:44:06 GMT
hi, First of all ,I would like to give a big thank you to Don (DV52) for his 23-page explanation of the Leuchte Channel on the mqb-platform. I printed it and I use it very often, trying to understand everything and making adaptions. It has been a great help. Thanks! Made some wel known mods to the front DRL's and tweaking others. Now to my question: I setup the taillights like Tagfahrlicht (drl) with less brightness (40%) during daytime also give them a dim (10% brightness) when turning signal is on ( Auf und abdimmend mid p-t-blinken-rampe) what happens is that the taillights not only dim during daytime but also dim at night to 10% (as expected..)when turning signal is on. What I want , (depending what looks good, for example) : Daytime 40% Daytime with blinker 10% Nighttime 100% Nighttime with blinker 60% Its just like a puzzle, and must be do-able with the priority order, I just don't get it right Second question : why is that for example coming home lights are adaptable by the Leuchte Channels , but also as indicated below in the Central electrics module @ address hex09, in this example set to Low Beam. What the difference, it looks double
I drive an A3 Etron in the Netherlands, 2015, factory led taillights replaced by the dynamic led taillight without coding, just hardwired without problems
|
|
|
Post by dv52 (Australia) on May 17, 2020 23:51:39 GMT
^^^michel: Hi and thank you for the kind words. My Leuchte-primer was written many years ago when I was attempting to make sense of Leuchte programming and it seriously needs revision. I'll get around to revising the many errors in the document when I get the chance.
So, as to your want's for the DRL operation of the tails: you are correct - it's just a matter of organizing the priority functions. I'm happy to make suggestions, but the retrofitted LED tail-light assemblies is a complication (for my understanding of the starting point of the exercise). Please post-up the complete Leuchte-set for the rear lamp in question on one side of the car.
I don't have an answer to your last question - perhaps someone else here has a hypothesis (perhaps the comfort illumination group of channels initialize the power supply requirements for the DRL function and the Leuchte-set programming allocates those power-supply parameters to the selected lamps, but I'm guessing)
Don
|
|
|
Post by michelaudia3 on May 18, 2020 19:06:47 GMT
hi Don,
Some things seems so simple but I didn't manage to make a good scan of my adaption channel so I had to write it down:
Leuchte23SL HLC10 Lasttype 23: allgemeine led bis 12w Lampendifektbitpos. 23 : a
Lichtfunktion A23 : Standlicht Allgemein (schluss , position, begrenzungslicht) Lichtfunktion B23 : CH of LH aktiv Dimmwert:100 Licht Ansteuerung HD AB23 : always
licht. c23: Parklicht links (beidseitig.parkl.aktiviert li & re) licht. d23 : Heckdeckel Offen Dimmw cd23 :100 Dimmdir. cd23 : maxi
licht.e23 :Tagfahrlicht licht f23 : nicht aktiv dimmw ef : 40 dimmdir. ef : maxi
licht G23: Blinken Links aktiv (beide Phasen) Auf-und ab bla bla Rampe licht H23 : nicht aktiv dimmw gh : 10 dimmdir GH : minimize
The retrofit was a led to led lights exchange, with some simple re-pin mods, the functions on the wires didn't change. Many thanks that you take a look and give your thoughts
Michel
|
|
|
Post by dv52 (Australia) on May 19, 2020 22:21:07 GMT
michel: It was not until I actually attempted to recode your Leuchte-set that I realized the limitation of leuchte programming to your wants.
Basically there are 2 x problems with your wants: first, you have run-out of Leuchte-pairs - so it's not possible to add any more functionality and second (and more fundamentally), you want to use the turn-signal "wink" function twice with a separate illumination level for daytime and nighttime. Alas Leuchte-programming won't do this (it's just not that sophisticated).
However, I'm suggesting a small modification to your settings below so that there is at least a variation in the level of illumination of the turn signal "wink" function between daytime and nighttime. With my suggestion below, the daytime illumination level for the turn-signal "wink" should be 10% (as you want), but it will not operate at nighttime because I've placed the command at a lower priority level. I've given the Parking Light function a higher priority - so this should supersede the "wink " function at nighttime. With my suggestion the turn-signal "wink" will be 100% for nighttime (instead of 40% as per your wants).
Leuchte23SL HLC10 Lasttyp 23 > 32 - allgemeine LED bis 12W Lampendefektbitposition 23 > 0A Fehlerort mittleres Byte DTC-DFCC 23 > 29 Lichtfunktion A 23 > Tagfahrlicht Lichtfunktion B 23 > not active Dimmwert AB 23 > 40 Lichtansteuerung HD AB 23 > Always Lichtfunktion C 23 > Blinken links aktiv (beide Phasen) Lichtfunktion D 23 > not active Dimmwert CD 23 > 10 Dimming Direction CD 23 > minimize Lichtfunktion E 23 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Lichtfunktion F 23 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Dimmwert EF 23 > 100 Dimming Direction EF 23 > maximize Lichtfunktion G 23 > Heckdeckel offen Lichtfunktion H 23 > Coming Home oder Leaving Home aktiv Dimmwert GH 23 > 100 Dimming Direction GH 23 > maximize
|
|
|
Post by michelaudia3 on May 23, 2020 17:03:30 GMT
Don, Hello from the Netherlands and thanks for your thoughts on my "case". I made the changes and it worked as expected. Thanks , I was unsure but you confirmed what I was thinking, not enough channels . Nevermind, I mainly just want to understand this programming . It's addicting. Having said that , I jumped on another challenge trying to get the famous or some call it notorious us-lights. Also challenging, it has to be toggled on or off by "drl on/off" option in the mmi-car-lightning-setup, and not the ambient-light option (I have all the ambient-zones installed) like some people did. I tried searching on the web of course , but its difficult finding one solution solely for Audi A3 8V FULL LED headlight (not matrix). Many codings for Golf Seat and A3 are for xenon or by adaption of one of the ambient light channels. I think the problem (or challenge) is the fact that the Drl and Blinker are the same led-strip . Tried some adapting but got errors with all of them. It's not a big deal if It just not possible , it's just that I can't stand it not get it to work since a French dude managed to get it functional. Michel Attached my notes and a youtube link at 0.55min he toggle drl-lights later he does some thing with ambient lights
|
|
|
Post by dv52 (Australia) on May 23, 2020 23:01:55 GMT
Michel: I'm not quite sure that I understand!! Trying to simplify your description - do you want the front turn-signal LEDs to illuminate as DRLs and as turn signal lamps - but with the option to turn off the DRL function using the DRL-off function in the MMI Menu (which will turn-off ALL DRL lamps)?
Don
|
|
|
Post by michelaudia3 on May 24, 2020 7:08:02 GMT
Michel: I'm not quite sure that I understand!! Trying to simplify your description - do you want the front turn-signal LEDs to illuminate as DRLs dimmed orange and as turn signal lamps - but with the option to turn off the DRL function switch either colour using the DRL-off function in the MMI Menu (which will turn-off ALL DRL lamps)? Don Don, I am not sure what's the best way : first option: keep white Drl , switching Drl off makes the orange leds illuminate second option : make the Drl orange, switching Drl off , makes the white leds illuminate Another thing, What is the difference between or the meaning of two DRL Leuchte-sets per side on Audi A3 ? Leuchte2SL VLB10 and Leuchte4TFL LB4 Can you explain? They are both active in my car ..... Michel
|
|
|
Post by dv52 (Australia) on May 25, 2020 1:04:01 GMT
I am not sure what's the best way : first option: keep white Drl , switching Drl off makes the orange leds illuminate second option : make the Drl orange, switching Drl off , makes the white leds illuminate Option 1
Try this- it works on my test-bench: To add the DRL ON/OFF switch on the MENU, set Außenlicht_Front-Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich to active
Change these:
Leuchte 0 BLK VL B36 Lichtfunktion A 0 > aktiv 100% Lichtfunktion B 0 > not active Dimmwert AB 0 > 100 Lichtansteuerung HD AB 0 > Klemme 15 mit Nachlauf. Lichtfunktion C 0 > Tagfahrlicht Lichtfunktion D 0 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Dimmwert CD 0 > 0 Dimming Direction CD 0 > minimize Lichtfunktion E 0 > Blinken links Dunkelphase Lichtfunktion F 0 > not active Dimmwert EF 0 > 0 Dimming Direction EF 0 > minimize Lichtfunktion G 0 > Blinken links Hellphase Lichtfunktion H 0 > not active Dimmwert GH 0 > 100 Dimming Direction GH 0 > maximize Leuchte1BLK VRB20 Lichtfunktion A 1 > aktiv 100% Lichtfunktion B 1 > not active Dimmwert AB 1 > 100 Lichtansteuerung HD AB 1 > Klemme 15 mit Nachlauf. Lichtfunktion C 1 > Tagfahrlicht Lichtfunktion D 1 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Dimmwert CD 1 > 0 Dimming Direction CD 1 > minimize Lichtfunktion E 1 > Blinken rechts Dunkelphase Lichtfunktion F 1 > not active Dimmwert EF 1 > 0 Dimming Direction EF 1 > minimize Lichtfunktion G 1 > Blinken rechts Hellphase Lichtfunktion H 1 > not active Dimmwert GH 1 > 100 Dimming Direction GH 1 > maximize
Another thing, What is the difference between or the meaning of two DRL Leuchte-sets per side on Audi A3 ? Leuchte2SL VLB10 and Leuchte4TFL LB4 Can you explain? They are both active in my car ..... Here's a very cut-down version of the wiring diagram for the pins (T46b/4 &T46b/10) that are controlled by the 2 x Leuchte-sets: So - I suspect that Leuchte4TFL LB4 establishes the power supply requirements for the DRL module in the headlight assembly - but I'm guessing
Don
|
|
|
Post by michelaudia3 on May 27, 2020 18:17:49 GMT
Thanks Don, I think you get a lot questions every day, maybe a lot are something you described ten times already. I have a lot of respect for the time you invest in helping strangers. You must have a lot of good karma😂 (do you really have a test bench?)
Tried the coding and it worked. Just made some adjustments, in Lichtsteuerung HD AB > Always I changed it for Klemme 15 mit Nachlauf. "always" made the turn signals also illuminate when you closed the car for about 40 sec. (That was not the ch/lh function. I think that's the time till the car really is asleep after closing)
And there was a minor (typing?) mistake in the Lichtfunktion H and Dimmwert GH , but got it working! I was a little disappointed that the turn signals are not dimmable....\
michel
|
|
|
Post by dv52 (Australia) on May 27, 2020 22:48:20 GMT
Tried the coding and it worked. Just made some adjustments, in Lichtsteuerung HD AB > Always I changed it for Klemme 15 mit Nachlauf."always" made the turn signals also illuminate when you closed the car for about 40 sec. (That was not the ch/lh function. I think that's the time till the car really is asleep after closing) And there was a minor (typing?) mistake in the Lichtfunktion H and Dimmwert GH , but got it working! I was a little disappointed that the turn signals are not dimmable....\ michel michel: Well done- you now have (most) of your wants!
Apology for the errors - thanks for identifying (I've made the corrections in my original instructions in case others try the tweak) Thanks Don, I think you get a lot questions every day, maybe a lot are something you described ten times already. I have a lot of respect for the time you invest in helping strangers. You must have a lot of good karma😂 (do you really have a test bench?) Yes, I do get a few questions: some more interesting than others - but I enjoy them all!!!
As for "karma", the only karma I have is the number that I have been given on this forum by those that have generously indicated their thanks (see underneath my details)!
And finally, yes I do indeed have a test-bench (it's my "virtual" MQB platform car) which I built as my understanding of OBD technology grew-see below. I suggest that you do the same!!
Don
|
|
|
Post by ketsokay on Nov 6, 2020 16:30:23 GMT
Hi, I'm Ketso, I'm under 24 hours old using the OBDEleven . So far it's super amazing. Activated a couple of things that make my car even more interesting. I drive a 2017 Audi S3 Sportback. I tried to use these adaptation settings as I'd like to use my turn signals as DRLs. All the inputs are successful, but there is no effect. There is 1 setting which does not match the settings stated above, "Lichtansteuerung HD AB 1", my options are "Always" and "Only when open". Am I missing something, is there another way to get them to work? I look forward to your response
|
|
|
Post by dv52 (Australia) on Nov 6, 2020 20:54:59 GMT
ketsokay : Hi Kelso. Good to read that you have taken an interest in Leuchte-programming, I hope that you persevere with the learning process and with the experiments I get to see lots of forum colleague attempts to change Leuchte-sets and I can often see their objective in the way that they choose the Leuchte-commands. Alas this dynamic is not evident in the programming in your 2 x pictures (no offense intended in making this observation).
So, rather than modifying your suggested settings, I've started afresh. The values below should switch-on (@ full brilliance) the turn-signal lamps whenever the DRLs are illuminated.
Just a note for anyone else reading this response: DON'T try this tweak if the turn-signal lamps are incandescent; using non-LED lamps for this tweak can melt the turn-signal lamp holders!!
Leuchte 0 BLK VL B36 Lasttyp 0 > 33 - LED-Modul Blinkleuchten Lampendefektbit Position 0 > 34 Fehlerort mittleres Byte DTC-DFCC 0 > 14 Lichtfunktion A 0 > Blinken links Hellphase Lichtfunktion B 0 > Tagfahrlicht Dimmwert AB 0 > 127 Lichtansteuerung HD AB 0 > Always Lichtfunktion C 0 > Blinken links Dunkelphase Lichtfunktion D 0 > not active Dimmwert CD 0 > 0 Dimming Direction CD 0 > minimize Lichtfunktion E 0 > not active Lichtfunktion F 0 > not active Dimmwert EF 0 > 0 Dimming Direction EF 0 > maximize Lichtfunktion G 0 > not active Lichtfunktion H 0 > not active Dimmwert GH 0 > 0 Dimming Direction GH 0 > maximize Leuchte1BLK VRB20 Lasttyp 1 > 33 - LED-Modul Blinkleuchten Lampendefektbitposition 1 > 3E Fehlerort mittleres Byte DTC-DFCC 1 > 15 Lichtfunktion A 1 > Blinken rechts Hellphase Lichtfunktion B 1 > Tagfahrlicht Dimmwert AB 1 > 127 Lichtansteuerung HD AB 1 > Always Lichtfunktion C 1 > Blinken rechts Dunkelphase Lichtfunktion D 1 > not active Dimmwert CD 1 > 0 Dimming Direction CD 1 > minimize Lichtfunktion E 1 > not active Lichtfunktion F 1 > not active Dimmwert EF 1 > 0 Dimming Direction EF 1 > maximize Lichtfunktion G 1 > not active Lichtfunktion H 1 > not active Dimmwert GH 1 > 0 Dimming Direction GH 1 > maximize Don PS: Regarding the "Lichtansteuerung HD" channel - this appears in each of the 35 x Leuchte-sets on MQB platform vehicles. Lichtansteuerung HD determines how the lamp operates when the boot-lid is open/closed. So, for those lamps that are NOT fitted to the boot-lid, the normal setting is always - meaning that the A & B light-functions operate independent of status of the boot-lid.
|
|
|
Post by ketsokay on Nov 8, 2020 15:54:02 GMT
Hi Don, Thank you so much for your reply. I think I'm seeing some serious flames here . I've done all the settings as you suggested above (See attached images), but I'm seemingly getting more problems. I get errors on my dash saying "Right front indicators faulty" & "Left front indicators faulty" after changing the settings. Also, the indicators on the dash are flickering at twice the speed, and my rear indicators have stopped sweeping. But saddly, the indicators are still not acting as DRLs. I'm ready to explore some more options. Thanks.
|
|
|
Post by dv52 (Australia) on Nov 9, 2020 20:39:10 GMT
ketsokay: OK - bummer! I tried my suggested settings on my test bench and they work perfectly!! Please confirm that your car has LED fittings for the turn signal (I assumed that they were LED from the lasttyp setting on Leuchte1BLK VRB20 on your picture Don
|
|
|
Post by macko71 on Nov 10, 2020 10:35:45 GMT
Hi. I've been searching now for a long time and can't identify a Leuchte set that is linked to Contour lights on the 2018 US Tiguan. What I mean (apologies if this is called something else) are lights on the sides of both front fenders and an a small red light on the side of both rear lights. Is there a summary of all Light Channels somewhere? I was trying to find the quoted document prepared by DV52, but could only find broken droppbox links. Any guidance will be appreciated!
EDIT: I'll respond myself as after some digging I found that:
Leuchte16BLK - controls left rear contour light Leuchte17TFL - controls left rear contour light Leuchte26NSL - controls both front contour lights
Setting Lasttyp to "not active" switched them off (I imported US version to Europe and needed to switch these off)
|
|
|
Post by michelaudia3 on Nov 13, 2020 11:45:37 GMT
If you want I can send you the PDF with lightning adaptions explained . Just post an email address
|
|
|
Post by sashka on Jan 6, 2021 17:37:52 GMT
.
|
|
|
Post by sashka on Jan 6, 2021 17:38:45 GMT
zamulin82@gmail.com
|
|
|
Post by andrea on Jan 29, 2021 8:08:11 GMT
Could you please send me the leuche channel explanation document? Thanks!
|
|
|
Post by ghostlight89 on Mar 4, 2021 21:20:15 GMT
hi, First of all ,I would like to give a big thank you to Don (DV52) for his 23-page explanation of the Leuchte Channel on the mqb-platform. I printed it and I use it very often, trying to understand everything and making adaptions. It has been a great help. Thanks! Made some wel known mods to the front DRL's and tweaking others. Now to my question: I setup the taillights like Tagfahrlicht (drl) with less brightness (40%) during daytime also give them a dim (10% brightness) when turning signal is on ( Auf und abdimmend mid p-t-blinken-rampe) what happens is that the taillights not only dim during daytime but also dim at night to 10% (as expected..)when turning signal is on. What I want , (depending what looks good, for example) : Daytime 40% Daytime with blinker 10% Nighttime 100% Nighttime with blinker 60% Its just like a puzzle, and must be do-able with the priority order, I just don't get it right Second question : why is that for example coming home lights are adaptable by the Leuchte Channels , but also as indicated below in the Central electrics module @ address hex09, in this example set to Low Beam. What the difference, it looks double
I drive an A3 Etron in the Netherlands, 2015, factory led taillights replaced by the dynamic led taillight without coding, just hardwired without problems Hi Michel and Don! I'm kinda new here, but I'd like to dive into the Leuchte channel. I've already figured out how to adapt to US style side lights but I'd like to learn a lot more. Is the doc you mentioned above still available somewhere? All your help would be greatly appreciated! Cheers, Ghost
|
|
|
Post by soapyaudi17 on Mar 12, 2021 0:02:05 GMT
Hello, new to the obdeleven and seen a video on on the taillights that the parking light blinks opposite from the blinker when blinkers are on or hazards are on. was curious on what the coding for this would be? any help would be awesome Thank you Bryan
|
|
|
Post by dv52 (Australia) on Mar 12, 2021 0:48:19 GMT
soapyaudi17 : Hi. Assuming that you are referring to an Audi A3 8V, what do you mean by the "Parking Lights" on the tail-lights (which are these - on the hatch, or on the rear panel?) and what type of tail-light fittings (LED, or incandescent lamp)?
|
|
|
Post by soapyaudi17 on Mar 13, 2021 16:37:33 GMT
hello, thanks for the reply. yes its for a 2017 Audi A3 8v base premium. so the video I seen the led blinker/hazard lights flash and the incandescent light flashes opposite. by parking I meant the incandescent lights and blinker/turn signal is the led lights. I do not have the dynamic turn signal so thought about changing up the way it blinks.
thank you bunches bryan
|
|
|
Post by dv52 (Australia) on Mar 13, 2021 22:13:00 GMT
its for a 2017 Audi A3 8v base premium. Good - but my problem is that Audi sell these models in every part of the world - and they are ALL differently optioned (and I have no knowledge of what options are fitted to the models in the various world markets). So, I'm still no further advanced in understanding your car I meant the incandescent lights and blinker/turn signal is the led lights. Bryan: hmmm......... it's probably my thick Australian accent that's confusing - the rear lights will be EITHER incandescent (meaning that the lamps in the fittings will have bulbs with filaments), OR they will have LED lamps - can't be both (with one exception, but let's not complicate stuff)!!
Anyhow - to progress this matter, I will simply assume that you want the blinker/turn-signal light to counter blink with the brake-light, which also functions as Parking Light because this how the tweak normally works. Please post-up screenshots of the complete Leuchte-set (meaning ALL 19 x adaptation channels) for Leuchte20BR LA71 from the central electrics module.
Don
|
|
|
Post by soapyaudi17 on Mar 16, 2021 22:55:21 GMT
Hello Don, thank you for taking a look at this for me.
Lasttyp 20> 35-kombinierte LED Blink-Bremsleuchten lampendefektbitposition 20> 13 Fehlerort mittleres Byte DTC-DFCC 20> 3d Lichtfunktion A 20> Nicht aktiv Lichtfunktion B 20> Nicht aktiv Dimmwert AB 20> 0 Lichtansteuerung HD AB 20> always Lichtfunktion C 20> Bremslicht Lichtfunktion D 20> Nicht aktiv Dimmwert CD 20> 127 Dimming Direction CD 20> Maximize Lichtfunktion E 20> Blinken links Hellphase Lichtfunktion F 20> Nicht aktiv Dimmerwert EF 20> 127 Dimming Direction EF 20> Maximize Lichtfunktion G 20> Blinken links Dunkelphase Lichtfunktion H 20> Nicht aktiv Dimmwert GH 20> 0 Dimming Direction GH 20> maximize
here is a link of where I seen this done.
Thank you Bryan
|
|
|
Post by dv52 (Australia) on Mar 17, 2021 8:13:20 GMT
Bryan: I note from your Leuchte-set values that you are from America/Canada - Shirley the lighting effect in the video can't be road legal?
Anyway, the information the you posted is a bit odd (it's certainly not factory-set)- you will need to send me the same data for Leuchte23SL HLC10 so I can figure-out what's happening
Don
|
|
|
Post by twinsen on Mar 18, 2021 15:31:57 GMT
Hi, as in my subforum I couldn't find an answer, asking here. I have indicators as set of LEDs, blinking with some kind of animation. Front indicators are made of DRL (which turns from white to orange while blinking), and rear indicators are separate line (outer and inner working together). Those are animating. Is there any adaptation to disable animation and make them blink as all, no moving animation?
|
|
|
Post by soapyaudi17 on Mar 19, 2021 22:29:42 GMT
Hello Don, yes I am in North America. I don't know if its street legal are not? I don't see why it would be bad?
here is the
Leuchte23SL HLC10
Lasttyp 23> 37-allgemeine LED bis 12w Lampendefektbitposition 23> A Fehlerort mittleres Byte DTC-DFCC 23> 29 Lichtfunktion A 23> Standlicht allgemein (Schlusslicht,Positionslicht,Begrenzungslicht) Lichtfunktion B 23> Coming Home oder Leaving Home aktiv Dimmwert AB 23> 127 Lichtansteuerung HD AB 23> Always Lichtfunktion C 23> Parklicht links (beidseitiges Parklicht aktiviert li & re) Lichtfunktion D 23> Nicht aktiv Dimmwert CD 23> 127 Dimming Direction CD 23> maximize Lichtfunktion E 23> Nicht aktiv Lichtfunktion F 23> Nicht aktiv Dimmwert EF 23> 0 Dimming Direction EF 23> Maximize Lichtfunktion G 23> Nicht aktiv Lichtfunktion H 23> Nicht aktiv Dimmwert GH 23> 0 Dimming Direction GH 23> Maximize I only changed:Dimmwert GH23> 0 to 127 Dimming Direction GH 23> maximize to minimize
then I changed back to what it was when it didn't work.
again thank you for looking into this. Bryan
|
|
|
Post by dv52 (Australia) on Mar 20, 2021 22:04:16 GMT
Bryan - OK make these changes:
Notes: - for safety reasons - I've programmed the lamps so that the Brake function is prioritized over the counter-blinking function on the 2 x
Brake-lights - I still suggest that you satisfy yourself that the lighting effect is road legal in your part of the world
- Record the "before" values in the Leuchte-sets - in case you need to revert to the old settings
Don
Leuchte20BR LA71 Lichtfunktion A 20 > Blinken links Dunkelphase Lichtfunktion B 20 > Nicht aktiv Dimmwert AB 20 > 127 Lichtansteuerung HD AB 20 > always Lichtfunktion C 20 > Bremslicht Lichtfunktion D 20 > Nicht aktiv Dimmwert CD 20 > 127 Dimming Direction CD 20 > maximize Lichtfunktion E 20 > Nicht aktiv Lichtfunktion F 20 > Nicht aktiv Dimmerwert EF 20 > 0 Dimming Direction EF 20 > maximize Lichtfunktion G 20 > Nicht aktiv Lichtfunktion H 20 > Nicht aktiv Dimmwert GH 20 > 0 Dimming Direction GH 20 > maximize Leuchte21BR RC8 Lichtfunktion A 21 > Blinken rechts Dunkelphase Lichtfunktion B 21 > Nicht aktiv Dimmwert AB 21 > 127 Lichtansteuerung HD AB 21 > always Lichtfunktion C 21 > Bremslicht Lichtfunktion D 21 > Nicht aktiv Dimmwert CD 21 > 127 Dimming Direction CD 21 > maximize Lichtfunktion E 21 > Nicht aktiv Lichtfunktion F 21 > Nicht aktiv Dimmerwert EF 21 > 0 Dimming Direction EF 21 > maximize Lichtfunktion G 21 > Nicht aktiv Lichtfunktion H 21 > Nicht aktiv Dimmwert GH 21 > 0 Dimming Direction GH 21 > maximize
Leuchte23SL HLC10 Lichtfunktion E 23 > Blinken links Dunkelphase Lichtfunktion F 23 > Nicht aktiv Dimmwert EF 23 > 0 Dimming Direction EF 23 > Minimize Lichtfunktion G 23 > Blinken links Hellphase Lichtfunktion H 23 > Nicht aktiv Dimmwert GH 23 > 127 Dimming Direction GH 23 > Maximize Leuchte24SL HRA65 Lichtfunktion E 24 > Blinken rechts Dunkelphase Lichtfunktion F 24 > Nicht aktiv Dimmwert EF 24 > 0 Dimming Direction EF 24 > Minimize Lichtfunktion G 24 > Blinken rechts Hellphase Lichtfunktion H 24 > Nicht aktiv Dimmwert GH 24 > 127 Dimming Direction GH 24 > Maximize
|
|
|
Post by soapyaudi17 on Mar 22, 2021 2:11:59 GMT
You are the man!!! Thank you!!! I will try this out and see how it goes.
|
|