|
|
Post by akhzari on Dec 8, 2016 23:42:30 GMT
Just today connected adapter and received next codes:
U112300 - Databus error value received
Intermittent
U042800 - Invalid Data Received From Steering Angle Sensor Module
Intermittent
U006500 - Vehicle Communication Bus E Performance
Intermittent
Terminal 15: Off
Supply voltage, terminal 30: 12.5 V
Unknown ambient data:
Date: 2016-11-18 21:08:48
Malfunction frequency counter: 2
Unlearning counter: 81
Mileage: 332 km
Priority: 2
What is mean?
Car goes normally , no problems seen.
|
|
|
|
Post by dv52 (Australia) on Dec 9, 2016 0:59:35 GMT
akhzan: Please post-up a copy of your history file back to about the start of November 2016.
Don
|
|
|
|
Post by akhzari on Dec 9, 2016 10:30:55 GMT
OBDeleven data log
Date: 2016-12-09 12:14
VIN: WVWZZZAUZGW281284
Car: Volkswagen Golf
Year: 2016
Engine: CZCA
Mileage: 1246 KM
---------------------------------------------------------------
01 Engine Control Module 1
System description: R4 1.4l TFS
Software number: 04E906027HB
Software version: 2328
Hardware number: 04E907309BH
Hardware version: H25
ODX name: EV_ECM14TFS01104E906027HB
ODX version: 001004
Long coding: 01250012232415082000
Trouble codes:
U112300 - Databus error value received
Intermittent
U042800 - Invalid Data Received From Steering Angle Sensor Module
Intermittent
|
|
|
|
Post by akhzari on Dec 9, 2016 10:31:12 GMT
OBDeleven data log
Date: 2016-12-09 12:14
VIN: WVWZZZAUZGW281284
Car: Volkswagen Golf
Year: 2016
Engine: CZCA
Mileage: 1246 KM
---------------------------------------------------------------
19 Gateway
System description: GW MQB Mid
Software number: 5Q0907530AH
Software version: 2246
Hardware number: 5Q0907530L
Hardware version: 211
Serial number: 01031610802026
ODX name: EV_GatewConti
ODX version: 013020
Long coding: 030100043F085700FB0002481C0F00010001050000000000000000000000
Subsystems:
System description: J367-BDMHella
Software version: 8050
Hardware version: H04
Serial number: 9469159503
System description: E221__MFL-DC1
Software version: 0103
Hardware version: H17
Serial number: 29160000513790026097
Long coding: 28FFFF
Trouble codes:
U006500 - Vehicle Communication Bus E Performance
Intermittent
Malfunction frequency counter: 2
Terminal 15: Off
Supply voltage, terminal 30: 12.5 V
Unlearning counter: 81
Date: 2016-11-18 21:08:48
Mileage: 332 km
Unknown ambient data:
Priority: 2
|
|
|
|
Post by akhzari on Dec 9, 2016 10:31:39 GMT
Did you mean this?
|
|
|
|
Post by dv52 (Australia) on Dec 9, 2016 11:04:30 GMT
|
|
|
|
Post by akhzari on Dec 9, 2016 11:33:23 GMT
OBDeleven vehicle history log
Date: 2016-12-09 12:24
VIN: WVWZZZAUZGW281284
Car: Volkswagen Golf
Year: 2016
Engine: CZCA
Mileage: 1246 KM
---------------------------------------------------------------
Long coding
Control unit: 17 Dash Board
Old value:
07A419082380000801082A001400000000000000
New value:
07A519082380000801082A001400000000000000
Mileage: 1246 km
Date: 2016-12-09 12:13
---------------------------------------------------------------
Long coding
Control unit: 08 Air Conditioning
Old value:
00020004200100001005000012101402
New value:
00020004300100001005000012101402
Mileage: 1246 km
Date: 2016-12-09 12:12
---------------------------------------------------------------
Long coding
Control unit: 08 Air Conditioning
Old value:
00020004200100001005000012101402
New value:
00020004300100001005000012101402
Mileage: 1246 km
Date: 2016-12-09 00:30
---------------------------------------------------------------
Long coding
Control unit: 17 Dash Board
Old value:
07A419082380000801082A001400000000000000
New value:
07A519082380000801082A001400000000000000
Mileage: 1246 km
Date: 2016-12-09 00:27
---------------------------------------------------------------
App
Name: Air recirculation memory
Old value: Select value:
New value: ON
Mileage: 1246 km
Date: 2016-12-09 00:25
---------------------------------------------------------------
App
Name: Gauge Test-Needle Sweep
Old value: OFF
New value: ON
Mileage: 1246 km
Date: 2016-12-09 00:19
---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Old value:
02730000FF00000051110001000938001F0100840120010000
New value:
02730000FF00000051110001000938001F0104840120010000
Mileage: 1246 km
Date: 2016-12-09 00:17
---------------------------------------------------------------
App
Name: DRL settings in head unit
Old value: OFF
New value: ON
Mileage: 1246 km
Date: 2016-12-08 19:43
---------------------------------------------------------------
Long coding
Control unit: 5F Information Control Unit 1
Old value:
02730000FF00000051110001000938001F0100840120010000
New value:
02730000FF00000051110001000938001F0104840120010000
Mileage: 1246 km
Date: 2016-12-08 19:42
---------------------------------------------------------------
App
Name: Discover startup logo
Old value: Standard
New value: Blue motion
Mileage: 1246 km
Date: 2016-12-08 19:40
---------------------------------------------------------------
App
Name: DV52 tails
Old value: Standard
New value: DV52-tails
Mileage: 1246 km
Date: 2016-12-08 19:35
---------------------------------------------------------------
App
Name: Windows function from remote
Old value: Select value:
New value: ON
Mileage: 1245 km
Date: 2016-12-08 19:02
|
|
|
|
Post by dv52 (Australia) on Dec 9, 2016 21:48:48 GMT
^^^^^^ akhzari: Hmmm............. looks like you have repeated manually via long coding many of the Apps that you have applied. For example the long coding changes are as follows: dashboard - needle sweep tweak, Information control unit - startup logo, Air conditioning - re-circulation memory.
Not sure why you have manually repeated the Apps, but there is nothing in your history report to explain the error messages. The problem might be elsewhere. I suspect that the intermittent failure of the angle sensor module is causing the databus error in the engine module - but I'm unclear about the E (Energy?) management DTC.
I would tell your dealer about the angle-sensor/databus faults, but I suspect that the dealer will just clear the DTCs and wait until the errors become more permanent.
My suggestion (guess really) - try reversing the Air Conditioning code change back to the old value and clear the error in module @ hex08. Then see if the E Management error returns. If it does, then I suspect it's a dealer matter (warranty - car hasn't traveled many kms).
But if your car is running OK and there have been no error messages on the MFD, then I suspect that these are just insignificant errors that appear from time-to-time from the constant monitoring of various transducers/sensors in the car. You could just keep a watch on the errors over time and see if they become persistent - and then talk to your dealer?
Don
|
|
|
|
Post by akhzari on Dec 10, 2016 14:26:34 GMT
1) As I said earlier, the error codes appears before(Date: 2016-11-18) I started use(Date: 2016-12-09) the obdeleven application. 2) Тhe fact that I repeated all the changes manually, you do not correctly interpreted... It just because I interested and looked what this and not made any changes manually. Probably application recorded all my activities, including a view of control units  3) All the changes I made in the Apps only and error codes I saw before I made changes. 4) Yes, you right, the car running OK and no error messages on MFD. So what you think - should I clear those errors or mut show them to my dealer? In any case, many thanks! Leonid. |
|
|
|
Post by dv52 (Australia) on Dec 10, 2016 20:32:24 GMT
1) As I said earlier, the error codes appears before(Date: 2016-11-18) I started use(Date: 2016-12-09) the obdeleven application. 2) Тhe fact that I repeated all the changes manually, you do not correctly interpreted... It just because I interested and looked what this and not made any changes manually. Probably application recorded all my activities, including a view of control units 3) All the changes I made in the Apps only and error codes I saw before I made changes. 4) Yes, you right, the car running OK and no error messages on MFD. So what you think - should I clear those errors or mut show them to my dealer? In any case, many thanks! Leonid. Leonid: OK - new information! If the DTCs appeared before you made changes, then clearly they are not related to the OBD11 changes -end of speculation! Sure - take the car to the dealer if you want, but I suspect that they will just clear the faults and they will tell you to come back if an observable problem becomes evident Don |
|
|
|
Post by akhzari on Dec 11, 2016 8:22:10 GMT
Finally, I decided to clear the DTC and watch on error codes over time.
Until now I have not seen any error, but if the error appears again then talk to my dealer.
|
|
anto
New Member
Posts: 4 
|
Post by anto on Dec 30, 2016 20:14:10 GMT
Hi
I found after scan the same error:
Codici guasto:
U006500 - Vehicle Communication Bus E Performance
Intermittent
Malfunction frequency counter: 1
Terminal 15: Off
Supply voltage, terminal 30: 12.7 V
Unlearning counter: 104
Date: 2016-12-29 17:17:31
Mileage: 5033 km
Unknown ambient data:
Priority: 2
I tried to make changes (Mirror Dip) and at the end i decided to clear it 2016-12-20.
the Long coding central unit 09 is still the same ( i had the old backup)
Can someone help my?
Thanks
|
|
|
|
Post by dv52 (Australia) on Dec 30, 2016 21:48:43 GMT
Anto: My apology if English is not your first language, but I can't understand your post. Can you write it again but this time using different words - please
Are you saying that the error message has been successfully cleared?
Did you use the App for mirror dip?
Did you use the App to remove mirror dip?
Was the error message present before the Mirror dip function was activated?
Are you saying that after Mirror dip was removed, your code-string on the Central electrics module didn't change? If so, then it suggests that you still have mirror dip activated!
Can you provide a copy of the code-string for the central electrics module, so that I can see what's happening with your changes?
Don
Don
|
|
anto
New Member
Posts: 4
|
Post by anto on Dec 31, 2016 6:03:28 GMT
Sorry for my English.
I try to explain....
2 weeks ago (18/19/20-12-2016) I have tried several times to make mirror dip coding manually but i had problem with dip mirror on my car. (my old post: Mirror dip not work correctly).
the day 20/12/2016 I have tried to install the app (14:09 and 14:27 two strange events) but without success..(The mirror dip app just said loading).
Yesterday the 30/12/2016 i found error U006500 .
Thanks.
My coding string (from old backup 14/12/2016)
Nome del backup: BCM
Long coding:
00000846C24100DB4BE44000000403081000000000000000000000000000
Subsystems:
Subsystem: WWS 151013
My coding string now
Nome del backup: Bcm3012
Long coding:
00000846C24100DB4BE44000000403081000000000000000000000000000
My history:
Data: 2016-12-31 06:23
VIN: WVWZZZAUZGW178000
Veicolo: Volkswagen Golf
Anno: 2016
Motore: CRLB
Mileage: 5110 KM
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208400040000801000
New value:
003A01208000040000801000
Mileage: 4898 km
Data: 2016-12-20 14:27
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208400040000801000
New value:
003A01208000040000801000
Mileage: 4898 km
Data: 2016-12-20 14:09
---------------------------------------------------------------
Adattamento
Unità di controllo: 09 Central Electrics
Name: Access control 2
Values:
Spiegelabsenkung bei Rueckwaertsfahrt:
Old value: active
New value: not active
Menuesteuerung Spiegelabsenkung:
Old value: active
New value: not active
Mileage: 4898 km
Data: 2016-12-20 13:58
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208400040000801000
New value:
003A01208000040000801000
Mileage: 4898 km
Data: 2016-12-20 13:52
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208400040000801000
New value:
003A01208000040000801000
Mileage: 4898 km
Data: 2016-12-20 13:52
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208C00040000801000
New value:
003A01208400040000801000
Mileage: 4898 km
Data: 2016-12-20 13:51
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208C00040000801000
New value:
003A01208400040000801000
Mileage: 4898 km
Data: 2016-12-20 13:38
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208C00040000801000
New value:
003A01208400040000801000
Mileage: 4898 km
Data: 2016-12-20 13:38
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208000040000801000
New value:
003A01208C00040000801000
Mileage: 4898 km
Data: 2016-12-20 13:29
---------------------------------------------------------------
Adattamento
Unità di controllo: 09 Central Electrics
Name: Access control 2
Values:
Spiegelabsenkung bei Rueckwaertsfahrt:
Old value: not active
New value: active
Menuesteuerung Spiegelabsenkung:
Old value: not active
New value: active
Mileage: 4870 km
Data: 2016-12-19 22:36
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208000040000801000
New value:
003A01208C00040000801000
Mileage: 4870 km
Data: 2016-12-19 22:34
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208000040000801000
New value:
003A01208C00040000801000
Mileage: 4870 km
Data: 2016-12-19 22:34
---------------------------------------------------------------
Adattamento
Unità di controllo: 09 Central Electrics
Name: Access control 2
Values:
Spiegelabsenkung bei Rueckwaertsfahrt:
Old value: active
New value: not active
Menuesteuerung Spiegelabsenkung:
Old value: active
New value: not active
Mileage: 4870 km
Data: 2016-12-19 22:24
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208C00040000801000
New value:
003A01208000040000801000
Mileage: 4870 km
Data: 2016-12-19 22:19
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208C00040000801000
New value:
003A01208000040000801000
Mileage: 4870 km
Data: 2016-12-19 22:19
---------------------------------------------------------------
Adattamento
Unità di controllo: 09 Central Electrics
Name: Access control 2
Values:
Spiegelabsenkung bei Rueckwaertsfahrt:
Old value: not active
New value: active
Menuesteuerung Spiegelabsenkung:
Old value: not active
New value: active
Mileage: 4831 km
Data: 2016-12-18 11:24
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208000040000801000
New value:
003A01208C00040000801000
Mileage: 4831 km
Data: 2016-12-18 11:20
---------------------------------------------------------------
Long coding
Unità di controllo: 52 Door Electronics Passenger Side
Old value:
003A01208000040000801000
New value:
003A01208C00040000801000
Mileage: 4831 km
Data: 2016-12-18 11:20
|
|
|
|
Post by dv52 (Australia) on Dec 31, 2016 7:16:49 GMT
Anto: No need to apologize for your English - it's much better than my Italian (and my parents were both borne in Italy) . So, your BCM and your 52 Passenger door controller have their original settings  Not sure why the App has generated the error message because I don't know what actual changes that the App makes. Have you tried clearing the error and if so, does the error return? Don |
|
anto
New Member
Posts: 4
|
Post by anto on Dec 31, 2016 7:58:52 GMT
this mornig
i checked again by scan and i found an other error.
It is 27-12-201.
Maybe yesterday i didn't check very well all errors:
1:
Codici guasto:
U006500 - Vehicle Communication Bus E Performance
Intermittent
Malfunction frequency counter: 1
Terminal 15: Off
Supply voltage, terminal 30: 12.7 V
Unlearning counter: 104
Date: 2016-12-29 17:17:31
Mileage: 5033 km
Unknown ambient data:
Priority: 2
2:
Codici guasto:
P171900 - Function restriction by engine control module
Intermittent
Malfunction frequency counter: 1
Dynamic environmental data: 02868D27C175
Date: 2016-12-27 08:04:45
Mileage: 4968 km
Unlearning counter: 99
Priority: 6
Thanks for your help
|
|
anto
New Member
Posts: 4
|
Post by anto on Jan 2, 2017 7:27:16 GMT
I have tried clearing the error and at the moment it doesn't return.
|
|
