Post by timmy35851 on Sept 10, 2020 4:58:51 GMT
Hi all,
I've had a digital dash retrofitted into my 2019 Tiguan, however I can't seem to change the information displayed within the gauges.
I can cycle through the 3 different views using the 'view' button on the steering wheel.
When going through the central touchscreen in 'car settings' under 'instrument cluster' it is showing as 'multifunction display' when I think this should be 'active info display', and this is where I should be able to change the settings.
Can anyone suggest which adaptation I should be looking at before I take it back to the shop i had it done at?
From the write-ups I've read, these are all the recommended changes below;
Module 17 (Instruments)
Byte 2, Bit 0-2: Fuel Tank - Variant 2
Byte 2, Bit 3-6: 50 Model: Variant A
Byte 12: Check the box for Bit 2 - "Alternative Dimming Function active"
Module 17 (Instruments) - ADAPTATIONS
IDE02489-Display depiction; adapt from Version 1 to Version 2
ENG153766-Tube_version; adapt from variant_0 to variant_2
Module 5F (Information Electr.) - ADAPTATIONS
ENG122230-ENG142097-Dashboard_Display_Configuration-ability_switch_nav_maps; OFF;
ENG122230-ENG122343-Dashboard_Display_Configuration-call_picture; adapt from OFF to ON
ENG122230-ENG127501-Dashboard_Display_Configuration-fastlist_most; adapt from OFF to ON
ENG122230-ENG122338-Dashboard_Display_Configuration-navigation_map_compression_mode; adapt from RLE to H264
ENG122230-ENG127005-Dashboard_Display_Configuration-navigation_map_transmission_mode; adapt from OFF to MOST_streaming
I've had a digital dash retrofitted into my 2019 Tiguan, however I can't seem to change the information displayed within the gauges.
I can cycle through the 3 different views using the 'view' button on the steering wheel.
When going through the central touchscreen in 'car settings' under 'instrument cluster' it is showing as 'multifunction display' when I think this should be 'active info display', and this is where I should be able to change the settings.
Can anyone suggest which adaptation I should be looking at before I take it back to the shop i had it done at?
From the write-ups I've read, these are all the recommended changes below;
Module 17 (Instruments)
Byte 2, Bit 0-2: Fuel Tank - Variant 2
Byte 2, Bit 3-6: 50 Model: Variant A
Byte 12: Check the box for Bit 2 - "Alternative Dimming Function active"
Module 17 (Instruments) - ADAPTATIONS
IDE02489-Display depiction; adapt from Version 1 to Version 2
ENG153766-Tube_version; adapt from variant_0 to variant_2
Module 5F (Information Electr.) - ADAPTATIONS
ENG122230-ENG142097-Dashboard_Display_Configuration-ability_switch_nav_maps; OFF;
ENG122230-ENG122343-Dashboard_Display_Configuration-call_picture; adapt from OFF to ON
ENG122230-ENG127501-Dashboard_Display_Configuration-fastlist_most; adapt from OFF to ON
ENG122230-ENG122338-Dashboard_Display_Configuration-navigation_map_compression_mode; adapt from RLE to H264
ENG122230-ENG127005-Dashboard_Display_Configuration-navigation_map_transmission_mode; adapt from OFF to MOST_streaming