|
Post by rosicky on Sept 7, 2020 8:15:52 GMT
Hi, I just started to play around with the Pro Version on my 3.0TDI Facelift from 2010 and wanted to setup the "High way light" with this guide.
Controller 09
coding 07
select 'rainlightsensor'
change value to HEX
the first two digits are byte 2
+1 = rainlight
+2 = highwaylight
so value 3 means both functions on
change value back to DEC and enter
I am able to select controller 09 and subystem 2 (rainlightsensor) but then I only see a Code-Value -> 0154972 which i can replace by a new one...
How can i select the bytes or change the value to hex??
Thanks for your help
|
|
|
Post by bechrissed on Sept 17, 2020 10:47:20 GMT
Please let me know if you figure this out, I want this coding on my car too. Thanks!
|
|