|
Post by benutzer on Sept 4, 2020 7:41:10 GMT
Hello to all members is it possible to activate the trailer function by my Audi A6 ?
Audi A6 3,0 TDI Quattro with air suspension trailer hitch preparation is original
nextweek I get an Westfalia trailer hitch with an Jaeger cable set 13 pin in my MMI I have the function: air suspension trailer on-of
does it mean that the "trailer hitch" is activated ?
I dont want have troubles with the parking sensors, blind spot assistant, and so on
Thanks in advance for an helping hand !!!!
|
|
|
Post by ustolle on Sept 4, 2020 9:57:53 GMT
You shall not expect the car to be pre coded for trailer hitch. Despite you have the “air suspension trailer on-of” in the MMI The below coding is done with original westfalia, but I am quite confident that it will work with a Jaeger module as well. It will make the park sensors and blindspot quite when reversing with trailer. After coding, your module 13 ACC can be deactivated, no reason for panic. It requires just a small drive and the ignition on/off a couple of time. Then all I back to normal.
STG 19 > Installation List > "69 - Trailer/Anhänger" - Activate STG 01 > Coding > Byte 5 > Bit 4 "Trailer installed" - Activate STG 09 > Coding > Byte 13 > Bit 4 "Hitch ECU,installed" Activate STG 13 > Coding > Byte 3 > Bit 3 Activate STG 17 > Coding > Byte 14 > Bit 5 "Trailer, YES" Activate STG 46 > Coding > Byte 14 > Bit 6 "Trailer control unit, 0=not installed / 1=installed" Activate STG 6D > Coding > Byte 01 > Bit 7 "Trailer Recognition installed" - Activate STG A5 > Coding > Byte 14 > Bit 1 "FW_AAG,installed" Activate
|
|
|
Post by benutzer on Sept 4, 2020 16:05:59 GMT
THANKS, great informations !! I will try it !!! THANKS
EDIT
I taken an look to OBDeleven but I dont have the STG 6D
What is: STG A5 > Coding > Byte 14 > Bit 1 "FW_AAG,installed" Activate ??
|
|
|
Post by ustolle on Sept 5, 2020 13:57:51 GMT
6D is Trunk Elect. if you dont have that equipment in your car, you just dont code it
"What is: STG A5 > Coding > Byte 14 > Bit 1 "FW_AAG,installed" Activate ??" - Just trailer activation in the A5/Zfas module
|
|
|
Post by benutzer on Sept 5, 2020 18:26:11 GMT
THANKS !!!!
|
|