Post by micp2771 on Aug 23, 2020 16:24:02 GMT
Hello all!
I'm new here and just received my ODBeleven Next Gen. I'm trying to do my 40K mile service and can't figure out how to check the DSG temp or prime the fuel filter. When I attached the dongle and everything is connected I click on transmission module "live data" and a screen pops up asking for a channel all the channels I have checked have no information in them, or it just tells me the shifter is in "p". As for the fuel pump I'm not even sure where to look. In the engine module the same screen comes up asking for a channel and whichever one I select has no data in it.
All of the modules I open and then click adaptations i just get the same pop up menu asking to select a channel. Any suggestions would be much appreciated.
I am running OBDeleven on an iPhone10 with the most up-to-date iOS. Thanks in advance for your help.
Ron
EDIT:
So since I'm at work with free time I went back out and played with it some more. I now for some reason I got values in the places I didn't before. I found the DSG temp under "live Data" channel 19. there are three temperatures listed there. Is there nay specific one I should be looking at?
For the fuel pump found that as well. IS there a specific value I should be putting in for the filling time and Fuel level?
I'm new here and just received my ODBeleven Next Gen. I'm trying to do my 40K mile service and can't figure out how to check the DSG temp or prime the fuel filter. When I attached the dongle and everything is connected I click on transmission module "live data" and a screen pops up asking for a channel all the channels I have checked have no information in them, or it just tells me the shifter is in "p". As for the fuel pump I'm not even sure where to look. In the engine module the same screen comes up asking for a channel and whichever one I select has no data in it.
All of the modules I open and then click adaptations i just get the same pop up menu asking to select a channel. Any suggestions would be much appreciated.
I am running OBDeleven on an iPhone10 with the most up-to-date iOS. Thanks in advance for your help.
Ron
EDIT:
So since I'm at work with free time I went back out and played with it some more. I now for some reason I got values in the places I didn't before. I found the DSG temp under "live Data" channel 19. there are three temperatures listed there. Is there nay specific one I should be looking at?
For the fuel pump found that as well. IS there a specific value I should be putting in for the filling time and Fuel level?
