4B Multifunktionsmodul

stephan
New Member

Posts: 5

4B Multifunktionsmodul Aug 22, 2020 5:57:36 GMT

Quote

Post by stephan on Aug 22, 2020 5:57:36 GMT

Hey, sup!

G7 FL 2019 with LED / Active Lighting

Situation: Activated Rain light in 4B. Reverted back this setting after my first shock.

After doing basic settings (? -> Basic headlamp setting / Grundeinstellung der Scheinwerfer and after 30 seconds I selected "Acknowledge", "quittieren") everything seems to be working again.

The lights, active lighting and matrix thing is looking good at night (imho)

But: Multifunction Module 4B gives two same static errors which I can't delete:

Fehlercodes: U12EB00 - Datenbus Frontlicht - Mehrverbau erkannt statisch U12EB00 - Datenbus Frontlicht Mehrverbau erkannt statisch (Data bus front light - additional installations detected)
Fehlercodes: U12EB00 - Datenbus Frontlicht - Mehrverbau erkannt statisch U12EB00 - Datenbus Frontlicht Mehrverbau erkannt statisch (Data bus front light - additional installations detected)

Four of the ecus have a yellow status now in OBDeleven (but no errors):

Light Control Left     / Lichtsteuerung links             (29)
Light Control Left 2 / Lichtsteuerung links 2         (D6)

Light Control Right / Lichtsteuerung rechts         (39)
Light Control Right 2 /   Lichtsteuerung rechts 2     (D7)


If someone could give me a hint, that would be great....

Thanks

Last Edit: Aug 22, 2020 6:16:46 GMT by stephan

stephan New Member Posts: 5	4B Multifunktionsmodul Aug 22, 2020 8:12:53 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by stephan on Aug 22, 2020 8:12:53 GMT Fixed... Forgot to check 19 Gateway

Carolco Senior Member Posts: 435	4B Multifunktionsmodul Aug 22, 2020 9:53:23 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Carolco on Aug 22, 2020 9:53:23 GMT Hi Stephan. Do you still have errors in the lights units? What happens in gateway for delete errors?

stephan
New Member

Posts: 5

4B Multifunktionsmodul Aug 22, 2020 13:15:37 GMT via mobile

Quote

Post by stephan on Aug 22, 2020 13:15:37 GMT

I think the error just indicates that something is there but not active.. Gateway - long coding. Compare former settings with new ones. In my case FPA_Funktion_aws or afs got deactivated after clicking on rain light in 4b.... No big deal. After setting it back to active, errors vanished.

Last Edit: Aug 22, 2020 14:32:12 GMT by Thirsty

Carolco Senior Member Posts: 435	4B Multifunktionsmodul Aug 22, 2020 20:58:24 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Carolco on Aug 22, 2020 20:58:24 GMT I retrofited the dynamic light assist changing the headlights. I had a problem with the voltage of the units do you told. The problem was in the low battery voltage.

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

4B Multifunktionsmodul

Post by stephan on Aug 22, 2020 5:57:36 GMT

Post by stephan on Aug 22, 2020 8:12:53 GMT

Post by Carolco on Aug 22, 2020 9:53:23 GMT

Post by stephan on Aug 22, 2020 13:15:37 GMT

Post by Carolco on Aug 22, 2020 20:58:24 GMT

Shoutbox