|
|
Post by danny1 on Aug 20, 2020 12:43:47 GMT
I've activated the gauge test to turn on needles sweep during engine turning on, but it doesn't work. Do you have any tips?
|
|
|
|
Post by poorman on Aug 21, 2020 20:15:59 GMT
It should work! I try it on my audi a1 gb and it works great at the start when you turn on the car
|
|
|
|
Post by majestic12 on Aug 25, 2020 12:11:34 GMT
Worked for me too from the first time. Try to turn off the car fully go out. Lock the car wait 30 seconds and check if it works.
|
|
|
|
Post by danny1 on Aug 25, 2020 22:37:58 GMT
Very strange I tried again first putting Gouge test OFF and than ON, but same result. I bought the old version of OBDeleven two weeks ago and it worked just for 2/4 changes (in two different cars), do you think that it has some factory defect?
|
|
