denbal
Junior Member
Posts: 61
|
Post by denbal on Aug 20, 2020 11:50:19 GMT
Original the tacho only displays 0-20-40-60-80-100-etc You can change this so it also (in a smaller font) displays 10-30-50-70 etc. STG 17 - Dashboard Long coding Tachometer_erweiterte_skalenteilung Change from “no” to “yes” It’s a bit to ‘busy’ for me at the dash this way, but maybe some people like it
|
|
|
Post by C8 test driver on Sept 8, 2020 18:51:47 GMT
Thanks unfortunately this did not work for me for some reason, 2019 C8 45 sedan
Did you have to go into a menu for the Virtual Cockpit to select this mode?
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Sept 10, 2020 17:13:00 GMT
That’s strange, i coded it on 4 C8’s allready. And after i made this thread, it also became a one-click-app i see, so it should be possible.
No changed where made in MMI or something
|
|
|
Post by C8 test driver on Sept 11, 2020 2:48:41 GMT
Thanks, I'll try it again.
|
|
|
Post by C8 test driver on Sept 11, 2020 18:53:36 GMT
denbal - unfortunately it doesn't work on my 2019 C8 45 - I tried long coding it again and tried the APP. Neither worked. Interestingly though the app recognized I had already turned it on in long coding, after deactivating it and retrying it with the app it didn't work One thing the App shows that you should add, is that this needs to be done with the engine off, ignition on. I tried that, but when I initially tried it the engine was on, so not sure if that messed things up? Thanks though for your thoughts.
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Sept 12, 2020 8:23:16 GMT
I just tried it on our newly delivered Q3 sportback 2020, and it takes the coding also. Your hood was open and handbrake turned on ?
Where are you from, u have km/h or m/h ? Maybe this is the difference, all cars i got it workint on were km/h cars.
|
|
|
Post by C8 test driver on Sept 13, 2020 15:27:47 GMT
Thanks for the info.
Yes, hood up, parking brake on.
the KM/H vs MPH could be it, where I am at we use MPH
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Sept 18, 2020 15:18:20 GMT
Worked on a new Q3 F3 and on many A6 C8 allready. Tried it on a A4 2019 yesterday without any luck also.
So maybe the problem ain’t mph/km but something else
|
|
|
Post by C8 test driver on Sept 18, 2020 20:38:37 GMT
yes, maybe operator error, lol.
Something else must be on or off not allowing it for some reason. I will have to try it on a friend's C8
|
|
JFY
New Member
Posts: 10
|
Post by JFY on Nov 7, 2022 10:33:02 GMT
How can I get this to work? I tried searching for this option in VCDS, but don’t see it listed at long coding or adaption?
|
|
|
Post by bigfoot0387 on Nov 17, 2022 12:10:16 GMT
Ive noticed this only works on KM/h and not MPH here in the UK. If I enable it and switch to KM/H it works as expected. Can anyone else test this by swapping from KMH to MPH?
|
|
|
Post by bigfoot0387 on Sept 8, 2023 11:21:02 GMT
I can confirm it only works on KM/H and not MPH. Tested this on an A7 C8 also
|
|