|
|
1.3.2
Aug 8, 2020 19:48:24 GMT
Post by Thirsty on Aug 8, 2020 19:48:24 GMT
Use the following format to report bugs
Description of bug: your bug description
iOS software version: your IOS version
Phone: your apple phone model
Car: your vehicle brand, model and year
User email: your user email of the OBDeleven application.
Changelog
v1.3.2
- Bluetooth and device firmware were combined in one update dialog
- Firebase and Admob libs update
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
1.3.2
Aug 10, 2020 20:40:48 GMT
Post by Reihenmotor5 on Aug 10, 2020 20:40:48 GMT
Description of bug: When trying to adjust the fade percentage for the fogs lights in Module 09 -> Static AFS Light -> Abdimmgeschwindigkeit from 125% to a higher percentage the app crashes. The range is 0-255. Default was 50% and changed it in VCDS prior to purchasing OBD11 and can confirm higher % can be entered. Other options within Static AFS Light can be changed and manipulated without an issue. This bug has been present since version 1.3.0 even on stable versions of iOS (beta tester).
iOS Software version: iOS 14 (Beta 4), this was happening in iOS 13 and can confirm it still happens on iOS 13.6
Phone: iPhone 11 Pro (iOS 14) and iPhone 11 Pro Max iOS 13.6
Car: 2019 VW Tiguan SEL-P R Line (both mine and friend with stable version of iOS 13.6)
User email: chrisn210@gmail
Hoping to get this bug resolved.
|
|
|
|
1.3.2
Aug 11, 2020 20:06:30 GMT
Post by plateump on Aug 11, 2020 20:06:30 GMT
This is not a bug but more or less a question related to the iOS Beta testing.
In an earlier version it was mentioned that testers are not charged with any credits using the apps in OBDeleven. This has changed obviously. Does that mean we are not considered to test the apps anymore?
|
|
|
|
1.3.2
Aug 11, 2020 22:56:23 GMT
Post by rkpilot on Aug 11, 2020 22:56:23 GMT
Description of bug : Very basic problem with fault scanning...I can communicate with the dongle and the vehicle ( partially). When 5he unit is scanning through the modules it always “ hangs up” at OF Digital Radio. The only system icons that are yellow at the top of the screen are engine and the far right triangle ... I assumed they would be yellow as they were scanned ? The only way I can go further is to press the red x and then the module icons ( engine, air conditioner, etc) appear if I try to open the engine icon ( which appears to show a fault ) , I get a black screen with the annoying rotating segmented circle which never goes away ... for at least 15 min 😖
Any ideas I am familiar with many different scan tools including the blue driver and this is really disappointing . I don have much interest in “coding” , esp with older vehicles but I would like detailed scans for VAG vehicles.
Obdeleven Pro 1.3.2
iPhone IOS 13.6
User email rjkneeland@gmail.com
Thanks for your help
|
|
|
|
1.3.2
Aug 12, 2020 12:34:20 GMT
via mobile
Post by skycatcher on Aug 12, 2020 12:34:20 GMT
Description of bug: VIN no longer recognized
iOS software version: 13.5
Phone: iphoneX
Car: Audi A6 4G/C7 Facelift 217
User email: bc1999@hotmail.com
Ever since the iOS and firmware upgrade for the dongle I’m asked to input the cars VIN. Before the update it automatically selected the vehicle.
|
|
|
|
1.3.2
Aug 17, 2020 14:52:39 GMT
via mobile
Post by jackmorris123 on Aug 17, 2020 14:52:39 GMT
Description of bug: application installed on iPhone fine, when connecting device I have a constant loop connect>>>update firmware>>>connect>>>update firmware with no end.
iOS software version: IOS 13.4.1
Phone: iPhone 11 Pro Max
Car: Volkswagon Polo GTI Plus 2020
User email: jackmorrisuk11@gmail.com
|
|
|
|
1.3.2
Aug 19, 2020 9:53:31 GMT
Post by scoobdriver on Aug 19, 2020 9:53:31 GMT
Description of bug: Backup Log values do not represent True Values of Modules / Adaptation
If I create a backup of a module Adaptations, they are not correct (when done on an android device (same car) they are correct)
iOS software version: 13.6
Phone:Iphone 11
Car: your vehicle brand, model and year : Audi A4 2020
User email:
|
|
agc91
New Member
Posts: 1
|
1.3.2
Aug 19, 2020 22:58:00 GMT
Post by agc91 on Aug 19, 2020 22:58:00 GMT
Description of bug: application installed on iPhone fine, when connecting device I have a constant loop connect>>>update firmware>>>connect>>>update firmware with no end. iOS software version: IOS 13.4.1 Phone: iPhone 11 Pro Max Car: Volkswagon Polo GTI Plus 2020 User email: jackmorrisuk11@gmail.com I just received my new device in the mail today. I went right out to my car and tried to connect. Here is the sequence: Connect > Update Firmware > "Firmware successfully completed" > Connect > Update Firmware > "Firmware successfully completed" > Connect... and this cycle continues to repeat. I tried turning the ignition off and back on, disconnecting the device and plugging it back in to the OBDII port, restarting my iPhone, all with no luck. Please help! iOS software version: 13.6 Phone: iPhone XS Car: 2020 VW Passat SEL TDI User email: allen.campora777@gmail.com |
|
algis
New Member
Posts: 1
|
1.3.2
Aug 19, 2020 23:06:03 GMT
Post by algis on Aug 19, 2020 23:06:03 GMT
same issue, disappointing
Description of bug: application installed on iPhone fine, when connecting device I have a constant loop connect>>>update firmware>>>connect>>>update firmware with no end.
iOS software version: IOS 13.6
Phone: iPhone 11 Pro
Car: VW GTI 2008.5 (US 2.0 TSi)
User email: tidewhiff@gmail.com
|
|
oag
New Member
Posts: 1
|
1.3.2
Aug 21, 2020 23:47:44 GMT
Post by oag on Aug 21, 2020 23:47:44 GMT
same issue as algis , agc91 and jackmorris123 . very disappointing. Description of bug: device: just out of the box OBDeleven nextgen pro pack: app installed on iphone ok. while connecting to device enter an endless loop: connect>update firmware>update successful>update firmware... ios software version:ios 12.4.8 Phone: iphone 6 Car: Audi A4 2004 (US 2.0TFSI) User email: mwbautz@gmail.com |
|
yn
New Member
Posts: 1
|
1.3.2
Aug 22, 2020 5:58:26 GMT
Post by yn on Aug 22, 2020 5:58:26 GMT
Description of bug: Brand new OBDeleven Starter Pack stuck in device firmware update loop. Procedure to replicate:
1. Plug in OBDeleven device into OBD2 port with engine off.
2. Start engine.
3. Open up iOS OBDeleven app and click connect, prompted to update device firmware.
4. Click update and waited for 2-5 minutes, phone prompted device firmware update successfully.
5. OBDeleven app display connecting, and prompt to update device firmware again.
6. Repeated 6-7 times with same result.
iOS software version: 13.6
Phone: iPhone 8
Car: VW Golf GTI 2010
Update: 23Aug it's working perfectly now.
|
|
|
|
1.3.2
Aug 22, 2020 7:43:07 GMT
Post by glenntasmania on Aug 22, 2020 7:43:07 GMT
Firmware update loop. Updated 5 times in a row and still asking. Making the product useless.
ios 13.6.1. (Had same issue on an android phone - v5)
iphone 8plus
audi s3 my 2015
gdwickham@gmail.com
|
|
nate
New Member
Posts: 2
|
1.3.2
Aug 25, 2020 9:17:52 GMT
via mobile
Post by nate on Aug 25, 2020 9:17:52 GMT
Just got the OBD and same with you lot firmware update cycle grrr
IOS14
Nathan.086@aussiebroadband.com.au
|
|
|
|
1.3.2
Aug 25, 2020 9:49:57 GMT
Post by Thirsty on Aug 25, 2020 9:49:57 GMT
The firmware update loop will be fixed with the next release.
|
|
nate
New Member
Posts: 2
|
1.3.2
Aug 25, 2020 10:24:12 GMT
via mobile
Post by nate on Aug 25, 2020 10:24:12 GMT
Awesome do you know when that update is coming and is there another way I get connected with IOs
|
|
|
|
1.3.2
Aug 25, 2020 10:31:04 GMT
Post by Thirsty on Aug 25, 2020 10:31:04 GMT
If my information is correct the fix will be released this week.
|
|
