brbi
New Member
Posts: 1
|
Post by brbi on Jul 5, 2020 14:46:18 GMT
Hi, Is it possible by coding to disable the "sailing" function on the Normal profile on T Roc 1.5 TSI DSG? I thought this function was only for the "Eco" profile, instead it was also implemented on the "Normal" profile and is frustrating in traffic.
|
|
|
Post by vernerbongo2 on Nov 19, 2020 18:14:52 GMT
I think it might be possible, I seen a check box somewhere going through modules. Can't remember where but it's there 👍😉👌
|
|
timn
New Member
Posts: 9
|
Post by timn on Jan 25, 2022 7:51:49 GMT
Would like to know it too. I have an opposite problem, I want to enable sailing/coasting on Drive mode. I would use Eco for all the time but gearbox resets to D after engine starts.
|
|
|
Post by gospod on Sept 7, 2022 11:28:16 GMT
Anything new regarding this?
|
|
draadnagel
New Member
Enter your message here...
Posts: 5
|
Post by draadnagel on May 19, 2023 13:38:36 GMT
I changed the following on my Seat Ibiza 1.5 FR 2021 (prefacelift) 6F and im driving around for 2 days and I can say that it does not coast anymore it just keeps the gearbox in gear all the time. It can be that its the same for your T Roc
Changes:
1
Gateway module 19 - Long coding - FPA function freilauf defaultON change value to "not active"
2
Adaptive Cruise Control module 13 - Long coding - Sailing_function change value to "no_predictive_sailing"
|
|
|
Post by MartiniB on May 20, 2023 6:33:15 GMT
draadnagel THANKS, will try this in Superb Mk3.FL what were default value in #2 ? i have "not active"
|
|
draadnagel
New Member
Enter your message here...
Posts: 5
|
Post by draadnagel on May 22, 2023 5:07:40 GMT
FPA_Funktion_Freilauf_DefaultON had a default value of "active"
And Sailing_function had a default of "not active"
So seems like you have the same
|
|
|
Post by peter80 on Jul 14, 2023 6:22:06 GMT
I changed the following on my Seat Ibiza 1.5 FR 2021 (prefacelift) 6F and im driving around for 2 days and I can say that it does not coast anymore it just keeps the gearbox in gear all the time. It can be that its the same for your T Roc
Changes:
1
Gateway module 19 - Long coding - FPA function freilauf defaultON change value to "not active"
2
Adaptive Cruise Control module 13 - Long coding - Sailing_function change value to "no_predictive_sailing" THANK YOU draadnagel, it worked on my Scala `22 DSG, finally I can enjoy D mode without the annoying clicking from the coasting. I only had to change the gateway module 19 - Long coding - FPA function freilauf. Fuel consumption is the same , driving in town is smoother and quieter. Coasting is completely useless and unnecessary.
|
|
draadnagel
New Member
Enter your message here...
Posts: 5
|
Post by draadnagel on Nov 24, 2023 19:30:44 GMT
|
|