|
|
Post by arnaud on Nov 17, 2016 16:14:44 GMT
Hello,
For a Golf 7 GTE:
I would like to use my OBDEleven module to disable permanently the interior monitoring sensors (because of too many problems with my alarm).
Is somebody can explain me how to make that and in which OBDEleven menus?
Thank you.
Arnaud
|
|
|
|
Post by dv52 (Australia) on Nov 17, 2016 21:17:57 GMT
Hello, For a Golf 7 GTE: I would like to use my OBDEleven module to disable permanently the interior monitoring sensors (because of too many problems with my alarm). Is somebody can explain me how to make that and in which OBDEleven menus? Thank you. Arnaud Arnaud: The switch for the interior monitoring sensor is in the code-string for the control module that OBD11 calls Central electrics (at address hex09). So - try this: - Select the Central Electrics module from the main screen
- Select Coding
- Scroll down the screen (it is 8 x pages on my tablet) until you see the entry in the picture below that I have boxed in yellow
- Change the value to No as shown and press the tick in the green circle
- Exit the software
Don  |
|
|
|
Post by arnaud on Nov 17, 2016 22:36:50 GMT
Thank you Don for your precise reply.
It works for me!
Arnaud
|
|
