|
Post by xmancz on Jun 24, 2020 10:38:12 GMT
Anyone know, how activate anti thef alarm without original factory alarm?
I tried this coding, but not working on Kodiaq 2019. I can´t activated Bit 0 on Byte 12 :-(
Activate anti thef alarm 1 - Module 09 - Electronic control unit. Code (31347) 2 - Extended coding (bytes) 3 - Byte 12 4 - Activate Bit 0 (Anti-theft system installed / active) 5 - Adaptation 6 - Submenu - Anti-theft protection 7 - DWA Alarmverzoegerung (Change value to "door contact thatcham driver") 8 - DWA Camper Modus (Change value to "enabled") 9 - Ueberwachung Innenentriegelungshelbel (Change value to "activated") 10 - Akustischer Alarm Signalhorn (Change value to "enabled") 11 - Submenu - Answer Signals 12 - Akustische Rueckmeldung global (Change value to "enabled") 13 - Akustische Rueckmeldung Signalhorn (Change value to "activated")
Anyone help???
|
|
|
Post by berkbeyis on Jun 25, 2020 21:57:55 GMT
So usually 2016+ models doesn’t have a long coding section. So you just need to do:
Central electrics Adaptations Submenu= Anti theft device
DWA alarmverzoegerung > driver door contact thatcham
DWA Campus modus > active
Ueberwachung innenentriegelungshebel > active
Akustischer alarm signalhorn >active
Diebstahlwarnalage > active (For newer cars that’s doesn’t have long coding section)
Submenu= acknowledgement signals
Akustische rueckmeldung global >active
Akustische rueckmeldung signalhorn >active
When you activated the alarm wait for 30 seconds at least
|
|
|
Post by xmancz on Jul 2, 2020 15:32:41 GMT
Thank you, it´s working
|
|