|
Post by turkgamer93 on Nov 14, 2016 21:49:49 GMT
Hello dear folks uswar I have since a big problem have a golf 7 with led taillights original only light mine since I have accidentally coded with the obdeleven the DAP led tail light on led light up my rear lights no longer and when I set on standings only Nor the inner only when I blinker the lights up and when the blinker is off then it lights up no longer just the inner. Please help to decode it back to despair and need your help With kind regards
|
|
|
Post by dv52 (Australia) on Nov 15, 2016 0:23:42 GMT
Hello dear folks uswar I have since a big problem have a golf 7 with led taillights original only light mine since I have accidentally coded with the obdeleven the DAP led tail light on led light up my rear lights no longer and when I set on standings only Nor the inner only when I blinker the lights up and when the blinker is off then it lights up no longer just the inner. Please help to decode it back to despair and need your help With kind regards turkgamer93: Hello. Not sure that I understand your question, but here is a response that I gave to another colleague that appears to have had similar issues with DAP coding. I have translated the DAP instructions to OBD11 speak in the table below. Check the values on your car and revert them back to the Stock setting as shown in the table. Note: since your car is fitted with LED lamps - ignore the values for Lasttyp channels in all four "Leuchte-sets" in the table (don't change these channels)Don
|
|