|
Post by OBDeleven on Oct 1, 2015 5:56:30 GMT
To modify coming leaving home lights function use Long coding function in Central electrics control unit. Bit 1 - Coming Home active Bit 2 - Leaving Home active Bit 3 - Coming/Leaving Home with DRL active Bit 4 - Coming/Leaving Home with Low Beam (Xenon) active Bit 5 - Coming/Leaving Home with FOG lights active Bit 7 - Coming/Leaving Home controlled via Driver's Door active
|
|
|
Post by TenderLuva on Oct 1, 2015 13:54:41 GMT
Thank you i needed that info
|
|
|
Post by tamergotchi on Mar 7, 2016 20:20:00 GMT
Will this also work without daylight sensor? If not is there a possibility to activate ch/lh without daylight sensor?
|
|
|
Post by tamergotchi on Mar 10, 2016 21:06:32 GMT
Hello .. Any reply to my question? Regards
|
|
|
Post by tamergotchi on Mar 31, 2016 15:35:03 GMT
Hello @all
Well, after getting no reply, i searched the net, and the result is, that CH/LH without a Sensor is not possible.
How to proceed ==> You need a new Frontwindow (yes, not a joke) ==> New rear mirror with light/rain sensor.
After implementing this you can activate CH/LH ;-)
Regards
|
|