|
|
Post by gtifanatic on Jun 8, 2020 20:19:32 GMT
Hi Folks.
anybody know how to deactivate sailing on a golf gte?
also should be related with the start-stop, but im not kinda sure.
who can help me?
thanks in advance!
cheers
|
|
|
|
Post by immert on Jun 27, 2020 14:21:16 GMT
Hello,
Yes It's possible! in module 19 you have a long coding option FPA_Funktion_Freilauf_DefaultON or something else. Switch it from active to not active and you're done.
|
|
|
|
Post by neolamb93 on May 4, 2021 20:12:07 GMT
Hi, I've seen multiple places with that sailing option, what is that, what does it do?
|
|
|
|
Post by dv52 (Australia) on May 4, 2021 21:56:37 GMT
AFAIK -"sailing" is where the auto-transmission is allowed to "free-wheel" while the car is coasting without throttle application. It's part of the emissions/efficiency function of the car. As immert advises, the software switches for FPA_function are in Byte 8- 12 of the hex19 module (what OBD11 calls the Gateway module) Don |
|
|
|
Post by sergi0dj on May 7, 2021 18:41:33 GMT
Excuse me, dv52 (Australia) mate, what does this section mean specifically? Would you explain it to me please ?? the software switches for FPA_function ibb.co/whWBdzKTHANKS!! |
|
|
|
Post by dv52 (Australia) on May 7, 2021 22:37:45 GMT
sergi0dj : The hex19 module long-code switches determine how VW's Drive Program Function ( FPA - Funktion Programm Antriebs) operates.
The various aspects of FPA that can be modified are contained in Byte 8 - Byte 12 (I only identified Byte 8 in my first reply).
In your picture, you have shown some of the software switches for FPA -and the particular Bit that you have identified with a "X", turns ON/OFF the entire FPA option (which I suggest that you DON'T alter).
However, if you scroll further down the list, you should find an entry "FPA_Funktion_Freilauf (FPA "free-wheel" function) - see below. This is Byte12, Bit 2.
As immert suggests, this should be toggled to not-active to switch-off "sailing"
Don
|
|
|
|
Post by sergi0dj on May 8, 2021 7:08:38 GMT
dv52 (Australia) Agree. And the function then of FPA_Funktion_Freilauf means to deactivate or not to deactivate the sail driving mode? (Deadpoint)??
|
|
|
|
Post by sergi0dj on Aug 9, 2022 7:16:41 GMT
sergi0dj : The hex19 module long-code switches determine how VW's Drive Program Function ( FPA - Funktion Programm Antriebs) operates.
The various aspects of FPA that can be modified are contained in Byte 8 - Byte 12 (I only identified Byte 8 in my first reply).
In your picture, you have shown some of the software switches for FPA -and the particular Bit that you have identified with a "X", turns ON/OFF the entire FPA option (which I suggest that you DON'T alter).
However, if you scroll further down the list, you should find an entry "FPA_Funktion_Freilauf (FPA "free-wheel" function) - see below. This is Byte12, Bit 2.
As immert suggests, this should be toggled to not-active to switch-off "sailing"
Don
I am somewhat confused. I explain. You name the función "FPA_Funktion_Freilauf", but the immert colleague refers to this other name "FPA_Funktion_Freilauf_DefaultON" , you are wrong then?? Which of the two options do I have to change to not activated? ibb.co/S7RVtdyibb.co/PNwh9MtThanks. |
|
