|
|
Post by audifreaket on Dec 16, 2015 18:31:27 GMT
How do i adapt new EGR valve in Golf 1.6 2005 year model? How do I know what channel to use? Is there any list of those channel numbers? I am a newbie.
What channel number have both EGR and Idlemotor?
|
|
|
|
Post by OBDeleven on Dec 17, 2015 11:24:17 GMT
Hi, you can try following:
Ignition ON
Engine OFF
Battery voltage at least 11.5 V
Basic Settings channel 74
Special Notes:
For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C.
In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again.
|
|
|
|
Post by ronbar on Feb 2, 2020 23:39:17 GMT
installed new EGR on 1.6v TDI 2012 golf. how do i program it? it shown "over current" message
|
|
|
|
Post by maciejchow on Jun 15, 2020 13:13:23 GMT
Hi, you can try following: Ignition ON Engine OFF Battery voltage at least 11.5 V Basic Settings channel 74 Special Notes: For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C. In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again. this is for vcds not obdeleven |
|
