|
|
Post by dmig77 on Jun 6, 2020 20:03:51 GMT
Could these errors appear after a full backup? (by the logs before backup they were not) or could they appear after applications “ambient color” or “traffic sign assistants”? How fix it?
|
|
|
|
Post by dmig77 on Jun 6, 2020 20:08:41 GMT
Error U101400 in 56 and 5F of course
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
Post by Reihenmotor5 on Jun 6, 2020 20:51:28 GMT
No, I’ve done a full backup with no errors. Traffic sign recognition will not produce a fault code error. You will only get an error displayed on the AID after coding for traffic sign since it “functions”.
Also did you do the scan while the ignition was running? 56 will produce a fault when ignition is running at times since that’s the radio. Clear them, run the scan again with the ignition on but not the engine running. I bet you’ll find 56 will no longer produce a fault. I expect the same will happen with 5F.
|
|
|
|
Post by dmig77 on Jun 7, 2020 6:54:22 GMT
I scan again with the ignition on but not the engine running, unfortunately faults remained. I tried to clear faults, but they are not cleared.
|
|
|
|
Post by dmig77 on Jun 9, 2020 15:38:41 GMT
I turned “traffic sign assistants” off and faults are disappeared!
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
Post by Reihenmotor5 on Jun 9, 2020 15:49:44 GMT
Interesting, what model year? Never had faults with my MY19, but turned the function off/backed it out since tired of the pop up on the dash saying error with traffic sign recognition.
|
|
|
|
Post by dmig77 on Jun 9, 2020 17:09:01 GMT
MY2019. Connect+innovation.
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
Post by Reihenmotor5 on Jun 9, 2020 17:50:31 GMT
MY2019. Connect+innovation. Did you use the app to activate or actual coding? |
|
|
|
Post by dmig77 on Jun 9, 2020 18:15:25 GMT
I used the app. Tomorrow I will try coding from the neighboring topic.
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
Post by Reihenmotor5 on Jun 9, 2020 18:36:08 GMT
I have the coding I used in my mod doc that you can find in my signature. No faults when scanned after enabling. Just the standard and expected error message on the dash.
|
|
|
|
Post by dmig77 on Jun 15, 2020 5:44:43 GMT
I have the coding I used in my mod doc that you can find in my signature. No faults when scanned after enabling. Just the standard and expected error message on the dash. This doesn`t work on my car  |
|
