|
Post by erikih on May 31, 2020 14:22:19 GMT
Hello,
I have a OBDeleven with a Pro account. Recently i ordered the stuff needed to install a backup camera, awaiting for delivery. I want to prepare my car by enabling the Rear View Camera by going into modules -> long coding -> byte_19_Rear_View_Low and activate that. But when i put my car into reverse, it looks like it enabled the parkpilot. Does anybody know how to correctly enable the Rear View Camera?
Thanks!
|
|
|
Post by davideddd on Jun 18, 2020 15:09:24 GMT
Hi did you solve the issue, I'm experiencing something similar
I activated byte_19_Rear_View_Low, camera works only until the ignition is on, then when I turn on the ignition, park pilot error message appears and then I must activate the camera again. It seems that OBDEleven doesn't save permanently the changes.
|
|
|
Post by erikih on Aug 25, 2024 15:39:23 GMT
Hi,
I don't know if you are still having the issue. But my issue is resolved. It looks like the reverse light comes on 1 or 2 seconds after I put my car in reverse, so the camera comes on later. I have run a wire from the CA-VWM01 cable to the camera and now it is working like a charm. As far as I can remember, the green wire gets 12v when the car is put in reverse.
|
|