|
|
Post by chriso on May 27, 2020 13:26:48 GMT
Bought this OBDeleven with pro license to be able to get rid of the brake pad warning since it didnt help to short the pins on the brake pad sensor connector.
Why isnt long coding enabled for most of the systems? Any way of enabling this?
Feels a bit like a waste of money to buy this and barely be able to do anything :/
|
|
petsu
New Member
Posts: 1
|
Post by petsu on Jul 3, 2022 12:41:44 GMT
I also bought the pro version for the same reason and feel really beaviken. It feels like they have devoted themselves to honing the look of apps instead of creating functional systems that are in demand by many - not good !!
|
|
|
|
Post by whataboutthis on Jul 3, 2022 18:58:45 GMT
If you go to Control Unit 03 (Brakes) and select info at the bottom of the screen you will see a tag called Protocol
Your car I believe is a KWP2000, The long coding feature to my understanding is part of the CAN: UDS setup like you get on the 2015 A6 for example
This is not a OBD11 Bug I don't think, you just have a car with an older control unit so you need to make changes in the CODING section
|
|
|
|
Post by swalker86 on Jul 13, 2022 8:50:54 GMT
Why would you not fix the brakes? It is illegal in most places to switch off override or modify safety features like this.
|
|
|
|
Post by whataboutthis on Jul 14, 2022 0:31:58 GMT
I replaced my braking system after upgrading engine power.
big brake kit is much more powerful at stopping but does not support brake pad sensors so coded it off.
|
|
