chip
New Member
Posts: 10
|
Post by chip on May 23, 2020 13:53:25 GMT
Hi everyone
I've recently activated the 30 colours app in my ODBeleven pro and noticed that the seafoam green colour doesn't correctly show on the lighting strips. The dash colour is correct but not the lighting in the car, that shows as a light blue instead, how do i get into the RGB settings in the control units to be able to manually update the correct RGB colour code?
Any help is very much appreciated and pictures can be posted for clarification
Thanks! Tom
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on May 24, 2020 10:12:05 GMT
They should be under Central Electrics (09) -Adapation --Ambient light color list (RGB list for colors 1 to 10)--Ambience_lightning_color_list_2 (RGB list for colors 11 to 30)inside you will see: Rotwert Farbe, Gruenwert Farbe & Blauwert Farbe which is basically Red,Green & Blue, use any RGB calculator to modify the values to the colors you want.
|
|
chip
New Member
Posts: 10
|
Post by chip on May 24, 2020 10:20:55 GMT
They should be under Central Electrics (09) -Adapation --Ambient light color list (RGB list for colors 1 to 10)--Ambience_lightning_color_list_2 (RGB list for colors 11 to 30)inside you will see: Rotwert Farbe, Gruenwert Farbe & Blauwert Farbe which is basically Red,Green & Blue, use any RGB calculator to modify the values to the colors you want. Thank you. I tried this but even after altering the RGB scale and restarting my system it still shows the lighting bars as a light blue, guessing there is no way to individually alter the bars and not both bar and cockpit?
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on May 24, 2020 11:42:40 GMT
I do know you can change the brightness individually but not the colors i am afraid.
|
|
|
Post by newty on May 24, 2020 11:54:43 GMT
RGB-Mixture of the LED-Strips is not linear as it would be on a display, so there are two lists, each affecting the displays and one affecting the strips.
Have a try at the Ambiente Farbliste LIN, reducing the blue component of your color. These are the values used for the strips.
|
|
chip
New Member
Posts: 10
|
Post by chip on May 24, 2020 15:34:46 GMT
RGB-Mixture of the LED-Strips is not linear as it would be on a display, so there are two lists, each affecting the displays and one affecting the strips. Have a try at the Ambiente Farbliste LIN, reducing the blue component of your color. These are the values used for the strips. Thank you! I will look into this this when it gets darker outside and let you know
|
|
chip
New Member
Posts: 10
|
Post by chip on May 24, 2020 17:35:49 GMT
RGB-Mixture of the LED-Strips is not linear as it would be on a display, so there are two lists, each affecting the displays and one affecting the strips. Have a try at the Ambiente Farbliste LIN, reducing the blue component of your color. These are the values used for the strips. So I’ve been into the adaptions again and (excuse the iPhone formatting) found these values that I changed to match colour number 14 on the dash but no changes appear to my lighting bars imgur.com/a/ZR6OHSB
|
|
|
Post by newty on May 24, 2020 18:10:55 GMT
Please enter another RGB value as entered in the dash-list. Preferably with a lower "B" value.
You can even enter something completely odd (Like R255 G1 B1) - should be a clear red - just to see if this does work at all. Entering the exact same value as for the dash will have the same effect as entering all 0 - it just copies the dash-color which will result in the off color.
You might also have to reset the ambient color to factory settings. This can also help in enabling changed colors.
|
|
chip
New Member
Posts: 10
|
Post by chip on May 26, 2020 20:30:30 GMT
Please enter another RGB value as entered in the dash-list. Preferably with a lower "B" value. You can even enter something completely odd (Like R255 G1 B1) - should be a clear red - just to see if this does work at all. Entering the exact same value as for the dash will have the same effect as entering all 0 - it just copies the dash-color which will result in the off color. You might also have to reset the ambient color to factory settings. This can also help in enabling changed colors. So I tried setting various LIN numbers 1 through 30 to red and the light bars didn’t Alter at all. It seems like they are still tied into the dash colours but like I say, they don’t quite match up
|
|