|
Post by latkowsky on May 19, 2020 17:08:46 GMT
I defaulted my breaks long coding.. and now it's all zeros and i can't find a back up of it... so i was hoping someone might paste their long code to see it that works
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on May 19, 2020 17:14:59 GMT
Have you checked under the history ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2020 17:48:35 GMT
May I ask exactly what you did to reset all to Zero.
The reason I ask if it was the Factory Reset function we are trying to push OBD11 to remove or at a minimum give a very explicit warning you will mess everything up.
Regards
|
|
|
Post by dv52 (Australia) on May 19, 2020 22:37:35 GMT
^^^ testeronline: yes, an excellent suggestion -and a long-overdue mitigation method for this not infrequent user error!
Apart from selecting the factory reset option, loss of the long code string in the Brake (not "break") module can sometimes occur on MQB platform vehicles if the "dashboard" module @ address hex17 is physically disconnected and then reconnected - as I understand. I have no idea why!!
Don
|
|