|
|
Post by jesse93 on May 17, 2020 21:21:21 GMT
Has anyone been able to code Hill Hold Control? I have heard different codings, but I don't which is the right one.
|
|
|
|
Post by scalastyle on Nov 11, 2020 0:12:09 GMT
I'm also trying to find some solution on activating hill hold. On Kamiq thread is something happening but there is still no code for enabling it. :/
|
|
|
|
Post by jesse93 on Jan 11, 2021 15:55:24 GMT
On the German Skodaforum the following code is provided:
Byte 47 Bit 6 aktiv
Byte 51 Bit 1 aktiv
However, when I try to do the coding, it gives an error message (function not available). It seems that I cannot change anything in the ABS module. Maybe it is related to the security code? I have tried 20103 and 40168. Does anybody know the right code or is obdeleven not supported to do long coding in the ABS module?
|
|
|
|
Post by jesse93 on Jan 11, 2021 21:13:02 GMT
Update: I think the error message was phone related. I have used another device and it worked!! Hill hold control is activated.
Credits to user Hobo2k of skodacommunity.de.
|
|
oranx
New Member
Posts: 34
|
Post by oranx on Jan 15, 2021 0:16:42 GMT
Update: I think the error message was phone related. I have used another device and it worked!! Hill hold control is activated. Credits to user Hobo2k of skodacommunity.de. Can you please tell me how this works? Because scala has traditional handbrake, not Electronic. So i am a bit confused. |
|
|
|
Post by scalastyle on Jan 15, 2021 12:24:47 GMT
Hill hold can work with manual handbrake. Octavia has it, and i had it in my old car with manual handbrake. So now we know for shure that you can enable it? I was searching for a solution since i bought my Scala. Is there any difference in ABS module. On Kamikq forum some said that there are two models of ABS. Edit: peta2020 was also searching a solution for enabling hill hold on Kamiq |
|
|
|
Post by jesse93 on Jan 17, 2021 12:44:16 GMT
Yes, it is enabled for sure and it works great!
Below you can find the specs of my ABS module.
Hardware number of ABS unit: 2Q0614517N
Software number of ABS unit: 2Q0614517AP
Hill hold assist
Module 03
Long coding
Activate byte 47 - Bit 6 (was 0B, now 4B)
Activate byte 51 - Bit 1 (was D0, now D2)
Hopefully this will also work for you.
|
|
oranx
New Member
Posts: 34
|
Post by oranx on Jan 18, 2021 20:28:57 GMT
I have DSG and this method is factory activated for me  So it holds my car for about 1sec, when i start drive uphill, example from traffic lights. Does this work same for you? Am i right? |
|
|
|
Post by jesse93 on Jan 20, 2021 9:49:03 GMT
Yes, that is right. It holds the brakes for appr. 2 seconds when the car is stopped on a hill. It makes it easier to drive off.
|
|
|
|
Post by scalastyle on Feb 8, 2021 19:46:29 GMT
Yes, it is enabled for sure and it works great! Below you can find the specs of my ABS module. Hardware number of ABS unit: 2Q0614517N Software number of ABS unit: 2Q0614517AP Hill hold assist Module 03 Long coding Activate byte 47 - Bit 6 (was 0B, now 4B) Activate byte 51 - Bit 1 (was D0, now D2) Hopefully this will also work for you. I just found out informations about my ABS module on my Scala Hardware number: 2Q0614517N Software number: 2Q0614517AG Software number doesnt match with yours so probably it won’t work on my Scala. :// Edit: Here is my long coding: 81108C64394181B531049C1B24E262A64962AD26224A245844541254452446659246B5644452241A222A482AA249D60F7D926BF0BE |
|
|
|
Post by jesse93 on Feb 8, 2021 23:26:09 GMT
I copied my long coding (prior to the HHC coding) from another post on this forum below:
jesse_s93
81108B64394781B1D1FE9C1724DA62A64962AD06224A24584C541255452446659246B5604452241A322A48AAA249D60B3F926BD0FC242424242424
81108C64394181B531049C1B24E262A64962AD26224A245844541254452446659246B5644452241A222A482AA249D60F7D926BF0BE
scalastyle
In bold I have indicated the bits that I have changed, according to the coding above. Can you see if they are already activated?
I saw that there was a difference in software version. That is probably why my long coding is longer (newer version).
I do not have ACC or a towbar. Maybe that can explain the different coding. Do you have one of these options?
|
|
|
|
Post by scalastyle on Feb 9, 2021 7:22:05 GMT
I have Adaptive cruise control and i can see how abs module could be different because of this.
I am looking now and those bytes are not active. Ill try to activate it to see what happens.
Is it possible to make a backup so if i screw something i can go back?
|
|
|
|
Post by jesse93 on Feb 9, 2021 22:21:21 GMT
I don't think that is possible with OBD11. From my experience, I have tried several long codings in module 03 before the coding stated above. That would always return in an error "function not available". So I think that if you are trying to do coding that won't work, it results in an error and won't let you do the coding.
|
|
|
|
Post by scalastyle on Feb 18, 2021 14:19:41 GMT
I just tried to long code my abs module but i got error “31 function not avalible” - after i put bytes in default i got error message on my scala for tpms sensors but after turning off and on the car it went away
Any suggestions?
Edit: Tried your suggestion for changing different device for obdeleven app and it worked!!!
Thank you so much jesse93 and also thanks to hobo2b from Skoda community DE!
|
|
vivo
New Member
Posts: 3
|
Post by vivo on Jun 2, 2024 20:09:38 GMT
I copied my long coding (prior to the HHC coding) from another post on this forum below: jesse_s9381108B64394781B1D1FE9C1724DA62A64962AD06224A24584C541255452446659246B5604452241A322A48AAA249D6 0B3F926B D0FC242424242424 81108C64394181B531049C1B24E262A64962AD26224A245844541254452446659246B5644452241A222A482AA249D6 0F7D926B F0BE scalastyleIn bold I have indicated the bits that I have changed, according to the coding above. Can you see if they are already activated? I saw that there was a difference in software version. That is probably why my long coding is longer (newer version). I do not have ACC or a towbar. Maybe that can explain the different coding. Do you have one of these options? hello jesse i dont know if you stil have scala but could you tell me whether it was quipped with side assist? in kamiq forum you mentioned some of the specs of your car and your ABS coding is similar to mine with same HW and SW.i am retrofiting side assist and it seems i have to change coding in ABS module to make it work, thats the reason i am asking about this. could you please let me know more about the specs you had on your scala? For now i know u had 1.0 tsi 81kw, manual, no hill hold, no ACC, no towbar. how about lane assist, side assist, front assist... |
|
vivo
New Member
Posts: 3
|
Post by vivo on Jun 2, 2024 20:13:44 GMT
I have Adaptive cruise control and i can see how abs module could be different because of this. I am looking now and those bytes are not active. Ill try to activate it to see what happens. Is it possible to make a backup so if i screw something i can go back? was your car equipped with side assist? |
|
|
|
Post by jesse93 on Jun 3, 2024 14:38:07 GMT
vivo, no my Scala was not fitted with Side Assist.
|
|
vivo
New Member
Posts: 3
|
Post by vivo on Jun 3, 2024 18:54:11 GMT
thanks for letting me know
|
|
|
|
Post by klingon on Nov 1, 2024 19:49:23 GMT
So is it possible to make one click app for škoda scala ? Did it work this coding?
|
|
|
|
Post by klingon on Nov 24, 2024 16:50:15 GMT
It is done,by app with obd eleven!
|
|
