the3
New Member
Posts: 1
|
Post by the3 on May 15, 2020 12:42:27 GMT
Hey All.... So I had an aftermarket intercooler installed and a valve cover gasket done on my 2015 S3. When i got the car back the cruise control was completely nonoperational. Since mine is a 2015 I don't have the ACC, but I am not sure how to use my OBDeleven to even check into the issue. I pulled trouble codes and had a few but nothing that screamed cruise control. I cleared everything then re-scanned and all I had was the Sirius Sat Radio not connected nonsense. Anyone have any idea or can get me started in the right direction? Im not very familiar with using the OBDeleven other than basic things. Thanks!
|
|
|
|
Post by dv52 (Australia) on May 15, 2020 23:36:07 GMT
Hey All.... So I had an aftermarket intercooler installed and a valve cover gasket done on my 2015 S3. When i got the car back the cruise control was completely nonoperational. Since mine is a 2015 I don't have the ACC, but I am not sure how to use my OBDeleven to even check into the issue. I pulled trouble codes and had a few but nothing that screamed cruise control. I cleared everything then re-scanned and all I had was the Sirius Sat Radio not connected nonsense. Anyone have any idea or can get me started in the right direction? Im not very familiar with using the OBDeleven other than basic things. Thanks! the3: Hi. Odd-that your scan-results are clear because most of the activities for the cruise control function happen over the CAN network (i.e. mostly on the drivetrain data-bus). I would have thought that any fault would have appeared!
I assume that the intercooler/valve cover replacement didn't involve any coding changes- please confirm? I also assume that the modules in the scan report are responding correctly - by which I mean that they ALL appear in the report.
Perhaps it might be prudent to post-up a copy of your scan report. Here's the instructions regarding how to generate a digital copy of your scan report. After you receive the email that you send to yourself, just cut-and-paste the results on this thread - please
Don
|
|
